Brother Button Hole Kit- Installation Manual

Page 2 - Before you start; New Features; LED Pointer Shows You the Needle Drop Position; Contents

1 Before you start It is important to perform the upgrade according to the procedure outlined in the Installation Guide. The machine can then be used as outlined in this upgrade Operation Manual.The screen illustrations in this manual may differ from actual ones shown on the machine. New Features • ...

Page 3 - Using the Embroidery Foot “W2” with LED Pointer; Included Item; Press; Part name; CAUTION; Note

2 Using the Embroidery Foot “W2” with LED Pointer Included Embroidery foot with LED pointer indicates the needle position with a red LED point.The LED pointer shows you the location of the needle penetration so that it is easier to adjust the embroidery position. Included Item Attaching Embroidery F...

Page 4 - Plug the connector of the embroidery foot

3 f Position the embroidery foot “W2” on the presser foot bar from behind. a Pre ss er foot ba r g Hold the embroidery foot in place with your right hand, and then use the screwdriver to securely tighten the presser foot holder screw. a Pre ss er foot holder s crew h Plug the connector of the embroi...

Page 5 - Adjusting the LED Pointer

4 * The LED pointer turns off automatically by lowering the presser foot or returning to the previous page. Adjusting the LED Pointer Adjust the LED pointer if it indicates a point different than the actual needle drop point.Before adjusting the LED pointer, mark the actual needle drop point on the ...

Page 7 - Using the Multi-Function Foot Controller; Included Items; Assembling the Controller; Memo

6 Using the Multi-Function Foot Controller With the multi-function foot controller, various sewing machine operations in addition to starting/stopping sewing, such as thread cutting and reverse stitching, can be specified to be performed. In addition, the small pedal can be installed on either the l...

Page 8 - Specifying the Functions; Adjusting the Pedal Positions

7 Specifying the Functions The functions performed by the multi-function foot controller can be specified in the machine settings screen. a Press , and then press or to select the functions to be performed by the multi-function foot controller. Adjusting the Pedal Positions The pedal spacing can be ...

Page 9 - Selecting New Embroidery Patterns

8 Selecting New Embroidery Patterns There are 4 new categories of embroidery patterns including, 2 large size fonts, buttonholes and decorative buttonhole frames. The pattern selection screen appears as below.Refer to the Operation Manual included with your machine how to select or edit the embroide...

Page 10 - Embroidery Pattern Color Change Table

9 35 min 1 (017) 2 (007) 16.2 cm 14.8 cm No.1 38 min 1 (017) 2 (007) 15.3 cm 14.1 cm No.2 31 min 1 (017) 2 (007) 15.1 cm 10.0 cm No.3 37 min 1 (017) 2 (007) 16.6 cm 12.8 cm No.4 32 min 1 (017) 2 (007) 15.1 cm 11.3 cm No.5 33 min 1 (017) 2 (007) 16.5 cm 12.2 cm No.6 35 min 1 (017) 2 (007) 15.1 cm 12....

Page 23 - Examples of Combinations

22 No.2 No.5 No.5 No.6 No.3 No.3 No.5 No.12 No.2 No.3 No.3 No.3 No.12 No.5 No.5 No.6 No.3 No.5 No.5 (515) (005) (804) (804) No.6 No.6 No.5 Examples of Combinations Positioning symbols: These symbols indicate how the embroidery patterns have been flipped or rotated to create the combined pattern.

Brother Button Hole Kit- Installation Manual

Table of Contents:

Other Manuals for Brother Button Hole Kit

Summary

Other Brother Models