Brohn BRGC6001BLK - User Manual

P a g e | 6 web: brohn.com.au GENERAL SAFETY  The appliance should only be installed and connected by a licensed qualifiedprofessional.  Care should be taken to ensure that the units and work surfaces that you build theappliance into, meet with the relevant standards. DURING USE  Care should be t...

P a g e | 7 web: brohn.com.au 3. SPECIFICATIONS 3.1 BRGC3001BLK Product specifications: A = 1 x 14.4 MJ/h triple crown (wok) burner (NG)B = Control panel o Front control operation o Automatic ignition o Metal pan stands o Flame failure safety device on each burner 31 0 49 0 26 8

P a g e | 8 web: brohn.com.au 3.2 BRGC6040DSS Product specifications: A = 1 x 10.8 MJ/h rapid burner (NG)B = 2 x 6.5 MJ/h semi-rapid burners (NG)C = 1 x 3.6 MJ/h auxiliary burner (NG)D = Control panel o Side control operation o Automatic ignition o Metal pan stands o Flame failure safety device on e...

P a g e | 13 web: brohn.com.au ELECTRICAL DETAILS Rated Voltage: 220 - 240 Vac 50 / 60 Hz Supply Connection: 3A Max Rated Inputs: 0.0008 kW Mains Supply Lead: 3 core x 0.75mm² (Type RR-F <HAR> marked) GAS DETAILS Connection: Rp ½ (ISO R7) Type: Natural Gas (1.0 KPa) LPG (2.75KPa)

P a g e | 14 web: brohn.com.au 4. USING THE GAS HOB BEFORE FIRST USE IMPORTANT: Any film or stickers that are present on the cooktop surface should be removed before use. The cooktop surface should be cleaned regularly (see “Care and Maintenance” section). SWITCHING THE HOB ON The following symbols ...

P a g e | 15 web: brohn.com.au  You should hold down the control knob for 20 seconds after the flame on the burnerhas lit.  After this 20 second interval, turn the control knob to your required setting betweenthe maximum and minimum setting symbols.  To switch the burner off, turn the control kno...

P a g e | 16 web: brohn.com.au 5. CLEANING Cleaning operations must only be carried out when the hob is cool. The appliance should be disconnected from your mains supply beforecommencing any cleaning process. CLEANING THE HOB TOP Any residues that remain on the hob top surface from cleaning agents w...

P a g e | 17 web: brohn.com.au MAINTAINING THE CAST IRON PAN STANDS IMPORTANT: Make sure that the hob surface and pan stands have cooled before you attempt to touch them.  Wipe the pan stands over with a soft, damp cloth washed in warm soapy water.  Using a paper towel, thoroughly dry the pan stan...

P a g e | 18 web: brohn.com.au 6. INSTALLATION AND GAS CONNECTION LEGAL The installation must be carried out by a licensed installer and professional gas fitter in accordance with the local standards and regulations. POSITIONING The adjacent furniture must be able to withstand a minimum temperature ...

P a g e | 19 web: brohn.com.au  400 mm between the hob surface, providing that the underside of the horizontal surface is in line with the outer edge of the hob. If the underside of the horizontal surface is lower than 400 mm, then it must be at least 50 mm away from the outer edges of the hob.  5...

P a g e | 21 web: brohn.com.au  This hob is not fitted with a device for discharging the products of combustion. Ensure that the ventilation rules and regulations are followed.  The walls behind and near the hob should be resistant to heat, steam and condensation.  Remember that the quantity of a...

P a g e | 22 web: brohn.com.au WARNING:  Regulator valve outlet pressure is set at the factory, please do not adjust in order to avoid the occurrence of safety accidents.  Turn off the gas source for any work on gas appliances. If you find any fault of the regulator valve operation, stop use and c...

P a g e | 23 web: brohn.com.au  Gas pressure may be checked on a semi-rapid hob burner. Remove the appropriate injector and attach a test nipple. Light the other burners and observe that the gas pressure complies with the gas standards in force.  IMPORTANT: On completion carry out a gas soundness ...

P a g e | 24 web: brohn.com.au 0.72 Semi-rapid 6.6 3.24 0.53 Auxiliary 3.7 1.8  Reassemble all burners carefully; in particular you should ensure that the flame spreader is correctly placed on the burner.  IMPORTANT: The minimum flow adjustment process must be completed before the appliance is use...

P a g e | 25 web: brohn.com.au IMPORTANT: WHEREVER THIS APPLIANCE IS INSTALLED, AT HOME, IN MARINE CRAFT OR CARAVAN, IT SHALL NOT BE USED AS A SPACE HEATER. GAS TAP MAINTENANCE These maintenance operations MUST ONLY be carried out by a licensed gas fitter.IMPORTANT: Before carrying out any maintenan...

P a g e | 26 web: brohn.com.au ○ Cable type: H05 RRF 3 core x 0.75 mm³ (Type RR-F <HAR> marked). ○ The mains supply cable and plug are supplied with this product. REPLACING THE MAINS SUPPLY CABLE If the mains supply cable is damaged, then it must be replaced by a licensed electrician and at ap...

P a g e | 28 web: brohn.com.au 8. CUSTOMER CARE Please be advised that without the proof of purchase, your warranty may not be valid, keep the receipt . STORE NAME/CONTACT DETAILS: ............................................... PURCHASE DATE: ...........................................................