Britax Prince User Manual - Free PDF Download

Page 2 - Contents

Vital information - Read now Page 1 Frequently asked questions Page 1 Crucial parts of your child car seat Page 2 Stage 1 Preparing to install the PRINCE in the car • Harness adjustment Page 3-4 • Forward anchorages Page 4 Stage 2 • Installing with a lap and diagonal seat-belt Page 5-6 • Installing ...

Page 5 - No child seat is escape proof; Yes, unless a passenger seat airbag is fitted.

Vital information - Read now page 1 Frequently asked questions No child seat is escape proof Second-hand car seats EXTREME HAZARD - DO NOT use the PRINCE on passenger seats fitted with airbags. DO NOT use the PRINCE on side facing vehicle seats. DO NOT use the PRINCE in the home. It has not been des...

Page 6 - Crucial parts of your child car seat; You need to know these before installing the PRINCE in your car.

Crucial parts of your child car seat Types of seat-belt You need to know these before installing the PRINCE in your car. This is a lap and diagonal seat belt This is a lap-belt DiagonalsectionLap section 1. Chest pads2. Harness3. Buckle4. Adjuster button (behind the cover)5. Adjuster strap6. Recline...

Page 7 - Stage 1 - Preparing to install the PRINCE in the car; You must adjust the height of the shoulder straps; BEFORE; you install your child seat; Harness adjustment; Forward Anchorage Ruler - see page; Too high; MUST

Stage 1 - Preparing to install the PRINCE in the car page 3 3 You must adjust the height of the shoulder straps BEFORE you install your child seat in a car. Harness adjustment 123 4 5 6 7 8 9 101 11 21 31 41 51 61 71 81 92 0 Forward Anchorage Ruler - see page 4 Too high Too low Correct The shoulder ...

Page 8 - Forward Anchorage Ruler; Forward Anchorages

page 4 Forward Anchorage Ruler 20 19 18 17 16 15 14 13 12 11 10 98765432 1 6 Hook the shoulder strap backonto the connection piece. Pull the strap forward to remove any slack. Make surethe harness is threaded through the buckle tongues asshown above. Repeat from step 2 with the other strap.Then put ...

Page 9 - Stage 2 - Installing the PRINCE in the car; Installing with a lap and diagonal seat-belt; marked in the child restraint.

Stage 2 - Installing the PRINCE in the car page 5 Have you adjusted the harness to the correct position for your child?If not, see Stage 1 on page 3. Installing with a lap and diagonal seat-belt IMPORTANT - Do not use any load bearing contact points other than those described in the instructions and...

Page 10 - Removing the PRINCE from the car

Removing the PRINCE from the car page 6 Unfasten the seat-belt and unthread it from the red diagonal belt guide. Carefully kneel on the PRINCE to push it into the carseat. Pull the seat-belt here to tighten the lap section... ...and then pull the diagonal section of theseat-belt tight here... 7a ......

Page 11 - Installing with a lap belt

page 7 Have you adjusted the harness to the correct position for your child?If not, see Stage 1 on page 3. Installing with a lap belt IMPORTANT - Do not use any load bearing contact points other than those described in the instructions and marked in the child restraint. Fasten the lap belt. 3 r Plac...

Page 12 - IMPORTANT

Reclining the PRINCE page 8 Correct buckle position Squeeze the recline bar and releasehandle together. Then slide the baseinto the required position. Let go of therelease handle and make sure that thePRINCE has locked into place. The PRINCE has a choice of three recline positions for your child‘s c...

Page 13 - Stage 3 - Fitting your child in the PRINCE; Everyday use of the harness; Unfasten the buckle by pressing the red button; FIRM; fit around your child.

Stage 3 - Fitting your child in the PRINCE page 9 Everyday use of the harness Have you checked the position of the ‘seat-belt’ buckle? If not see ‘Correct buckle position’ on page 8. Loosen the harness by pushing the adjuster button inas you pull the shoulder straps forward as much aspossible. Unfas...

Page 14 - Stage 4 - Looking after the PRINCE; Removing the covers; use the PRINCE without it.; ONLY USE; DO NOT; liquid as these may weaken the harness and the seat.

Stage 4 - Looking after the PRINCE page 10 Removing the covers Cleaning the covers Cleaning the harness, chest pads and seat Gently pull the cover off the seat, easing the shoulderstraps and chest pads through the slots in the corner ofthe cover. IMPORTANT - The cover is a safety feature. NEVER use ...

Page 15 - Removing and cleaning the harness buckle; lubricate or oil any part

page 11 Removing and cleaning the harness buckle Food and drink may find their way inside the buckle of the PRINCE harness. This can stop it from working properly. Follow the instructions below if you DO NOT hear a click when fastening the buckle. To re-fit the buckle to your car seat hold the endbr...

Page 16 - Replacement covers are available from your Britax stockist.; Important Information - Read before your first journey; touch in sunny weather and the cover fabric may also become faded.; Guarantee

Replacement cover page 12 After an accident The PRINCE, its cover and chest pads have been carefully designed, manufactured and tested to high safety standards. Don’t put your child's safety at risk by using other makes of replacement cover or chest pads. They could stop the PRINCE from protecting y...

Britax Prince - User Manual

Table of Contents:

Was this manual helpful?

About this manual

Summary

Ask a question