Zephyr EOT-E48ASX - Manuals

Page 2 - APPROVED FOR RESIDENTIAL APPLIANCES

2 PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.INSTALLATION MUST COMPLY WITH ALL LOCAL CODES.IMPORTANT: Save these Instructions for the Local Electrical Inspectors use.INSTALLER: Please leave these Instructions with this unit for the owner.OWNER: Please retain these instructions for future ref...

Page 4 - READ AND SAVE THESE INSTRUCTIONS

4 Import ant safety Notice CAUTION: FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS OR VAPORS. WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: A. Use this unit only in the manner intended by the manufacturer. I...

Page 5 - BEFORE INSTALLING THE HOOD

5 www.zephyronline.com Electrical & Inst allation requirement s ELECTRICAL REQUIREMENTSImportant: Observe all governing codes and ordinances.It is the customers responsibility: To contact a qualified electrical installer. To assure that the electrical installation is adequate and in conform...

Page 6 - PARTS NOT SUPPLIED; CAUTION

6 List of Materials PARTS SUPPLIED: Blower unit housing Hood canopy Metal filter x 1 Halogen light bulb x 4 Upper and lower Duct covers x 4 Chimney structure Hardware Packet: Allen spanner x 1 Template Use, Care and Installation guide Nuts x 12 7x45 screws x 6 4 x 6 screws x 12 (to ass...

Page 12 - Electrical connection; knockout

12 8. Electrical connection WARNING Electrical Shock Hazard Warning: Turn off power circuit at the service panel before wiring this unit. 120 VAC, 15 or 20 Amp circuit required. ELECTRICAL GROUNDING INSTRUCTIONS THIS APPLIANCE IS FITTED WITH AN ELECTRICAL JUNCTION BOX WITH 3 WIRES, ONE OF WHICH (GRE...

Page 13 - Inst

13 www.zephyronline.com d. Fasten the canopy with 11 screws from the bottom. Bottom View FRONT FRONT FRONT 12. Fix 6 nuts on the internal side of top duct covers sections (squere slots) and fix each other with 6 screws (3 per side). Rectangular slots Plan diagram top sections Nut top sections Chimne...

Page 16 - CONTROLS

16 Description of the hood & Controls 1 Control panel 2 Grease filter 3 Grease filter release handle 4 Halogen lamp (position and nr. of lamps may vary) 5 Hood canopy 6 Duct cover 7 Air outlet (used for Ductless version only) CONTROLS Use the high suction speed in cases of concentrated kitchen v...

Page 17 - Maintenance; CLEANING; GREASE FILTER; REPLACING THE LIGHT BULB:

17 www.zephyronline.com Maintenance Prior to any maintenance operation ensure that the cooker hood is disconnected from the power supply. CLEANING The cooker hood should be cleaned regularly internally and externally. For cleaning use a cloth moistened with a neutral liquid detergents. Avoid abrasiv...

Page 18 - Issue

18 Tr ouble Shooting After installation, the unit doesnt work? Light works, but motor is not turning. The unit is vibrating. The motor is working, but the lights are not. The hood is not venting out properly. Metal filter is vibrating. 1. The power source is not turned ON. 2. The power line and the...

Page 19 - arranty; TO OBTAIN SERVICE UNDER WARRANTY:

19 www.zephyronline.com W arranty TO OBTAIN SERVICE UNDER WARRANTY:or any Service Related Questions, please call:1-888-880-8368 Staple your receipt here. Proof of the original purchase date is needed to obtain service under the warranty. TO OBTAIN SERVICE UNDER WARRANTY: You must present proof of or...

Page 20 - metal filter; Part Description

20 List of Part s and Accessories Part Description Part# halogen bulb, 12V 20 W metal filter Part Description Part# Ductless recirculating kit charcoal replacement filter duct cover extension kit internal blower - 600 cfm in-line blower - 1100 cfm ZRC-00AL EBI-600A EBN-1100A Z0B-0013 Z0F-C060 Z1C-00...

Zephyr EOT-E48ASX - Manuals

Manuals:

Manual Zephyr EOT-E48ASX

Summary

Zephyr Manuals