Zephyr CPA-E42ASX - Manuals

6 Electrical & Inst allation Requirement s ELECTRICAL REQUIREMENTS IMPORTANT Observe all governing codes and ordinances. It is the customer’s responsibility:To contact a qualified electrical installer.To assure that the electrical installation is adequate and in conformance with National Electri...

7 www.zephyronline.com List of Materials PARTS SUPPLIED • Hood body, with stainless steel baffle filter and halogen light bulbs and incandescent lamp already installed • Two telescopic duct covers and support bracket • Hardware Packet:- 24x53 T1T2 "L" Male monkey spanner (1 piece)- 3.5X9.5 s...

9 www.zephyronline.com Ducting Options and Examples Closely follow the instructions set out in this manual. All responsibility, for any eventual inconveniences, damages or fires caused by not complying with the instructions inthis manual, is declined. VENTING METHODS This range hood is designed to e...

13 www.zephyronline.com INTERNAL BLOWER INSTALLATION • Fit the blower inside the hood. • Install the blower to the support with 4 screws(Provided), check that the rectangular outlet of theblower matches with the rectangular slot of thesupport. Note: The 4 fixing screws must be screwed in from the ou...

14 • Install the supplied round transition collar to thepreviously installed cover/round transition supportplate from inside the hood. Align and attach with 2screws securely. Horizontal discharge • From the inside of the hood, remove (rear side) thecover/rectangular transition support unscrewing the...

15 www.zephyronline.com • Install the supplied round transition collar to thepreviously installed cover/round transition supportplate. Align and attach with 2 screws securely. EXTERNAL BLOWER ELECTRICAL CONNECTION- PRELIMINARY OPERATIONS Installing the external blower junction box • Remove the elect...

17 www.zephyronline.com Inst allation INSTALLING THE HOOD ONTO THE WALL 1. Disconnect and move freestanding or slide-in rangefrom cabinet opening to provide easier access torear wall. Use a thick, protective covering overcountertop, cooktop or range to protect from damageand debris. Select a flat su...

20 Inst allation - Electrical Connection & Final Inst allation S tep s 18. Electrical connection WARNING Electrical Shock HazardWarning: Turn off power circuit at the service panelbefore wiring this unit.120 VAC, 15 or 20 Amp circuit required. ELECTRICAL GROUNDING INSTRUCTIONS THIS APPLIANCE IS ...

21 www.zephyronline.com Description of the Hood 1 Controls 2 Baffle filter 3 Halogen lamp 4 Incandescent ambient lamp 5 Hood body 6 Duct cover 6 2 2 3 3 4 1 5

22 Features & Controls - T ouch Controls & Features Use the high suction speed in cases of concentrated kitchen vapors. It is recommended that the cooker hood suction isswitched on for 5 minutes prior to cooking and to leave in operation during cooking and for another 15 minutes aftertermina...

23 www.zephyronline.com Filter Clean Reminder (Standard Baffle Filters fitted): A set of baffle filters are fitted by the factory. These Baffle Filters are intended to filter out residue from cooking. They need not be replaced on a regular basis but are required to be kept clean. The Filter Clean Re...

24 Maintenance BAFFLE FILTER This must be cleaned once a month using non abrasi-ve detergents, either by hand or in the dish-washer,which must be set to a low temperature and a shortcycle.When washed in a dish-washer, the baffle filter maydiscolor slightly, but this does not affect its filteringcapa...

25 www.zephyronline.com Maintenance REPLACING THE MOOD LIGHTING BULB: To replace mood lighting bulb, remove baffle filter fromhood.To access lamp area, remove the two threaded knobsthat fix the cover.Unscrew mood lighting bulb counter-clockwise andreplace with a standard max. 40W, type T10, 125V-130...

26 T rouble Shooting After installation, theunit doesn’t work? Light works, but motoris not turning. The unit is vibrating. The motor is working,but the lights are not. The hood is not ventingout properly. Metal filter is vibrating. 1. The power source is not turned ON. 2. The power line and the cab...

27 www.zephyronline.com List of Part s and Accessories Part Description Part# Internal Blower 600 CFM External Blower 1000 CFM Halogen Bulb, 120V 50 W Filter Baffle Z0B0020S EBI-600B CBE-1000 Front Panel 42" SS CPC-0012 Front Panel 42" Brass CPC-0112 Front Panel 48" SS CPC-0018 Front Pan...