Zenoah MD6210M - Manuals - manualsarea.com

Page 2 - EXPLANATION OF SYMBOLS AND SAFETY WARNINGS; RISK OF DAMAGING HEARING; APPROVAL NUMBER OF CE EXHAUST EMISSION REGULATION; SOUND LEVEL; EC DECLARATION OF CONFORMITY

MD6210M GB-2 EXPLANATION OF SYMBOLS AND SAFETY WARNINGS WARNING!!! RISK OF DAMAGING HEARING Wear head, eye and ear protection. APPROVAL NUMBER OF CE EXHAUST EMISSION REGULATION DIRECTIVE 97/68/EC AMENDED 2002/88/EC e13*97/68SH3G3*2002/88*0095*02 * Specifications are subject to change without notice1...

Page 3 - SAFETY PRECAUTIONS; Contents

MD6210M GB-3 G B 5 1 2 10 11 29 28 27 24 25 17 4 3 26 13 21 22 23 25 16 8 18 19 20 14 15 6 9 7 12 SAFETY PRECAUTIONS Warning labels bearing the mark on the product and in this Manual refer to important safety matters. Please familiarize your-self with them and observe them well.If a warning label on...

Page 4 - MODEL; Warning labels on the machine; (1) WARNING! The machine canbe a dangerous tool if used incorrectly

MD6210M GB-4 2. Specification MODEL MD6210M Dimensions (LxWxH)** mm 354x520x740 Dry weight* kg 12.7 Fuel tank capacity liter 1.8 Engine type Air cooled 2-cycle gasoline engine Displacement cm 3 62.0 Air filter Half wet polyurethane foam Carburetor Diaphragm, rotary valve type Ignition system C.D.I. ...

Page 5 - For safe operation

MD6210M GB-5 G B WARNING 1. Read this manual carefully un- til you completely understandand follow all safety and oper-ating instructions. 2. Keep this manual handy so that you may refer to it later when-ever any questions arise. Alsonote, if you have any questionsw h i c h c a n n o t b e a n s w e...

Page 6 - OTHER PRECAUTIONS; WORKING CIRCUMSTANCE

MD6210M GB-6 but do not squeeze the handleswith constant, excessive pres-sures. e) If you feel discomfort, redness and swelling of your fingers or anyother par t of your body, see adoctor before getting worse. 8. The ignition system of your unit produces an electromagneticfield of a very low intensi...

Page 7 - WARNING

MD6210M GB-7 G B 1. Protective headgear2. Protective goggles3. Protective mask4. Rubber boots5. Ear muffs6. Neck covering7. Protective clothing8. Rubber gloves9. Protective clothing 5. For safe operation around 30 ~ 40 minutes per ses-sion, and take 10 ~ 20 minutes ofrest between work sessions. Also...

Page 8 - USING THE PRODUCT

MD6210M GB-8 tainer approved for flammable liq-uids. h) Make sure the unit is properly as- sembled and in good operatingcondition. i ) Do not use the machine near a fire, as aiming the machine in thedirection of a flame may causeflammable substances to ignite. PRECAUTIONS WHENREFILLING CHEMICALS • B...

Page 10 - TRANSPORTATION

MD6210M GB-10 5. For safe operation part, or any lubricant, always besure to use only ZENOAH prod-ucts or products which have beencertified by ZENOAH for use withthe ZENOAH product. 6. In the event that any part must be replaced or any maintenance orrepair work not described in thism a n u a l m u s...

Page 12 - NOTE

MD6210M GB-12 7. Fuel ■ FUEL WARNING • Gasoline is very flammable . Avoid smoking orbringing any flame or sparks near fuel. Make sureto stop the engine and allow it cool before refuel-ing the unit. Select outdoor bare ground for fuel-ing and move at least 3 m (10 ft) away from thefueling point befor...

Page 14 - ate valve and stop the engine.; Horizontal direction :

MD6210M GB-14 The spray range is changed by shifting the bell posi-tion after loosening the lock ring. (A) Pulled out position: Long distance, narrow angle spray(B) Pushed In position: Short distance, wide angle spray 3. Start the engine and carry the unit on your back.4. While holding the control h...

Page 18 - Limited warranty; THE WARRANTY DOES NOT APPLY TO; THIS WARRANTY DOES NOT COVER; ARE LIMITED; Troubleshooting guide

MD6210M GB-18 Limited warranty Should any failure occur on the product under normal oper-ating conditions within the applicable warranty period, thefailed part will be replaced or repaired free of charge by aZENOAH authorized dealer. WARRANTY PERIOD: 1 year (6 months if used profession- ally, and 30...