Zenoah BK4310FL-S - Manuals

Page 2 - Contents; 0 Disposal ...................................................21

2 SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for thisreason you are requested to read all such instructions carefully andfollow them without fail...

Page 3 - Warning labels on the machine; WARNING

3 1. Warning labels on the machine (1) Read owner’s manual before operating this machine.(2) Wear head, eye and ear protection.(3) Wear foot protection.(4) Wear gloves.(5) Beware of thrown objects.(6) Warning / Attention(7) Keep all children, bystanders and helpers 15 meters away from the machine. I...

Page 4 - Symbols on the machine

4 For safe operation and maintenance, symbols arecarved in relief on the machine. According to theseindications, please be careful not to take a mistake. (a) The port to refuel the "MIX GASOLINE" Position: FUEL TANK CAP (b) The direction to close the choke Position: AIR CLEANER COVER (c) The...

Page 5 - Safety precautions

5 2. Never use the product,(1) When the ground is slippery or when you can’t maintain a steady posture. (2) At night, at times of heavy fog, or at any other times when your field ofvision might be limited and it would bedifficult to gain a clear view of theworking area. (3) During rain storms, durin...

Page 8 - How you can reduce the chance of; (3) Be extra prepared for blade thrust if; How you can maintain the best

8 This contact causes the blade to stop foran instant and then suddenly move or”bounce” away from the object that washit. The operator can lose control of theunit and the blade can cause seriouspersonal injury to the operator or anyperson nearby if the blade contacts anypart of the body. 2. How you ...

Page 11 - • Use ZENOAH’s genuine nylon cutter. When using a; IMPORTANT

11 (Note that this is a left-turning screw.) (1) Bar (2) Holder B (3) Holder A 2. Attach the cover (SE11,(11)) and fix it with screw. 3. Insert blade between cutter holder A and cutter holder B. (SE11) 4. Attach cover and spring washer. (SE11)5. Screw the bolt to fix them into place. (SE11) Tighteni...

Page 16 - ADJUSTING THE LINE LENGTH

16 7. Operation 4. Use a slow, deliberate action to cut heavy growth. The rate of cutting motion will depend on the materialbeing cut. Heavy growth will require slower actionthan will light growth. 5. Never swing the unit so hard as you are in danger of losing your balance or control of the unit. 6....

Page 21 - • Do not modify or disassemble the machine.; • When you dispose of the machine, do not

21 9. Trouble shooting 10. Disposal • When the symptoms in the left column do not improve after taking the measures in the right column, please contact the shop where you bought this product. • For the measures marked with ✩ , please buy ZENOAH’s genuine parts at the shop where you bought this produ...

Page 22 - Limited warranty

22 Should any failure occur on the product under normal operating conditions within the applicable warranty period, the failed part will be replaced or repaired free of charge by a ZENOAH authorized dealer. WARRANTY PERIOD: Six (6) months after purchased by end-user subject to 12 months from produce...

Page 24 - To Dealer: Please complete the following form at time of sale.; ZENOAH; Private

1-9, Minamidai, Kawagoe-city, Saitama, 350-1165 Japan To Dealer: Please complete the following form at time of sale. Product Model: ZENOAH BK3410FLBK4310FL BK3410FL-SBK4310FL-S Date of Purchase: D / M / Y Purchaser: Dealer: Name: Name: Address/Phone: Address/Phone: Equipment No.: Engine No.: Use: Pr...