Page 3 - Compliance and Regulatory Statements; UHF RFID Approved Antenna information
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual iii Compliance and Regulatory Statements UHF RFID Approved Antenna information Only Zebra approved antennas are allowed and cannot be user replaceable. Antenna PN: Zebra Technologies P1033567-01Type: PatchGain: -10 dBi Wireless Approved Ante...
Page 4 - Agency Approvals; • Part15 Subpart C
iv Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 Agency Approvals Zebra ZXP Series 7 Card Printer complies with following applicable directives and standards for the ITE: Residential, Commercial & Light Industry environments • For US/Canada/Mexico/Australia&NZ • FCC Class A, CFR...
Page 5 - Declarations of Conformity; phase to phase; Japanese Notification
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual v Declarations of Conformity For a formal certificate, please contact the Compliance Office at Zebra’s Agoura Hills facility. EUROPE: Norway Only: This product is also designed for IT power system with phase to phase voltage 230V. Earth grou...
Page 6 - Icons; Ribbons and Zebra True Secure; Zebra Contacts; Support and Services:
vi Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 Icons Throughout this manual, different icons highlight important information, as follows: Zebra Supplies Genuine Zebra supplies meet stringent quality standards and are recommended for optimal printing quality and proper printer performa...
Page 7 - Contents
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual vii Contents 1 • Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 9 - Introduction; Description
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 1 1 Introduction Description This Manual provides detailed information on the installation and operation of Zebra ZXP Series 7 Card Printers manufactured by Zebra Technologies Corporation. The ZXP Series 7 offers the choice of single- or dua...
Page 10 - Printer Components; Printer only
2 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 1: Introduction Printer Components Printer Components Printer only Printer with Laminator Print Cover Release Button Output Hopper Feeder Cartridge Manual Feed Slot Operator Control Panel (OCP) Reject Bin Ribbon Drawer Options Cover Lamina...
Page 11 - Installation and Setup; General Information
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 3 2 Installation and Setup General Information This section will guide you through the installation and setup of your Card Printer. This consists of the following procedures, which should be performed in the order presented. • Unpacking the ...
Page 12 - Unpacking the Printer; Printer without a Laminator; Open the shipping container.
4 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Unpacking the Printer Unpacking the Printer Printer without a Laminator Step 1. Inspect the shipping container to ensure that no damage has occurred during shipment. If any damage is apparent, file a claim with th...
Page 13 - Electrical specifications
2: Installation and Setup Unpacking the Printer P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 5 Step 5. Lift the Printer and Laminator out of the carton by holding it with both hands. Step 6. Place the Printer in a location that meets the following requirements: • A reasonably dust-free...
Page 14 - Printer with a Laminator
6 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Unpacking the Printer Printer with a Laminator Step 1. Inspect the shipping container to ensure that no damage has occurred during shipment. If any damage is apparent, file a claim with the shipper. Step 2. Open t...
Page 15 - Lift the Printer out of the carton by holding it with both hands.
2: Installation and Setup Unpacking the Printer P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 7 Step 5. Lift the Printer out of the carton by holding it with both hands. Step 6. Place the Printer in a location that meets the following requirements: • A reasonably dust-free and dirt-free...
Page 16 - Loading Cards; do not touch the print surfaces; must be
8 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Loading Cards Loading Cards Step 1. Remove the wrapping from the card stack. Step 2. Holding the card stack by the sides ( do not touch the print surfaces ), hold it vertically against a flat surface such as a des...
Page 17 - Appendix F
2: Installation and Setup Loading Cards P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 9 Step 5. Open the Feeder Cartridge Door, and slide the Card Stack Pusher all the way to the right, until it locks in place. Step 6. Place the card stack in the Feeder Cartridge in the correct orientat...
Page 18 - Installing the Feeder Cartridge and Output Hopper; Feeder Cartridge; Ensure that the Feeder Cartridge locks securely in place.; Output Hopper; Ensure that the Output Hopper locks securely in place.
10 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Installing the Feeder Cartridge and Output Hopper Installing the Feeder Cartridge and Output Hopper Feeder Cartridge The Feeder Cartridge is positioned on the right side of the Printer and holds the cards to be p...
Page 19 - Installing the Dual Cleaning Cartridge; Locate the cartridge frame and the two adhesive rollers.
2: Installation and Setup Installing the Dual Cleaning Cartridge P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 11 Installing the Dual Cleaning Cartridge The Dual Cleaning Cartridge cleans the cards entering the Printer from the Feeder Cartridge. The cartridge consists of a cartridge fra...
Page 20 - Open the Options Cover.
12 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Installing the Dual Cleaning Cartridge Step 5. Open the Options Cover. Step 6. Locate the area where the Dual Cleaning Cartridge will be installed. Step 7. Hold the cartridge by the extended handle. Step 8. Inser...
Page 21 - Installing the Manual Feed Cleaning Cassette; Locate the cassette frame and adhesive roller.
2: Installation and Setup Installing the Manual Feed Cleaning Cassette P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 13 Installing the Manual Feed Cleaning Cassette The Manual Feed Cleaning Cassette cleans the cards entering the Printer from the Manual Feed Slot. The cassette consists o...
Page 23 - Loading a Print Ribbon; Ribbons in order
2: Installation and Setup Loading a Print Ribbon P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 15 Loading a Print Ribbon The ZXP Series 7 Printer is designed to work only with Zebra True Colours ® Ribbons in order to achieve rich, vibrant image production over the full-color spectrum. S...
Page 24 - Take the print ribbon out of the box.; PURPLE; Rotate the spools as required to take up excess slack in the ribbon.
16 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Loading a Print Ribbon Step 5. Take the print ribbon out of the box. Step 6. Carefully unroll the print ribbon. Note that there is a clear leader with a sticky surface holding the print ribbon in place. This lead...
Page 25 - Close the Ribbon Drawer.
2: Installation and Setup Loading a Print Ribbon P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 17 Step 11. Close the Ribbon Drawer. Step 12. Close the Print Cover, and press down until it latches securely.
Page 26 - Loading the Laminate; Opening the Laminator; Open the Laminator Bottom Cover.
18 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Loading the Laminate Loading the Laminate Opening the Laminator Step 1. Press the Laminator Cover Release Button, and lift the cover to its upright position. It will remain in that position. Step 2. Open the Lami...
Page 28 - Do NOT use tools
20 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Loading the Laminate Step 3. Remove the cassette(s) by pulling each cassette straight out from its spindle. Step 4. Open the cassette(s), like a clam shell, by separating its two halves. Grasp the two halves firm...
Page 29 - Blue; do not
2: Installation and Setup Loading the Laminate P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 21 Loading the Laminate Cassette(s) Step 1. Remove a new roll of laminate from its packaging. There are two different laminate rolls, one for the Upper Cassette ( Blue ) and one for the Lower Ca...
Page 30 - Pull out an inch or two of laminate past the lip of the cassette.
22 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Loading the Laminate Step 7. Pull out an inch or two of laminate past the lip of the cassette. Step 8. Close the cassette by firmly pressing the “clamshell” together. You will hear a click and feel a detent when ...
Page 32 - Slide the cassette onto the spindle.
24 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Loading the Laminate Installing the Laminate Cassette(s) Step 1. If the laminate cassettes are not already removed, remove the cassettes. Step 2. Slide the cassette onto the spindle.
Page 34 - The laminate is installed
26 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Loading the Laminate Step 5. Apply increasing rotational pressure, and listen for the audible click when the locking lever snaps into place. Step 6. The laminate is installed
Page 35 - Laminating Contact Smart Cards; Remove the Upper Laminate Cassette see
2: Installation and Setup Loading the Laminate P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 27 Laminating Contact Smart Cards Use registered laminate for the top surface of a contact smart card. This type of laminate has a repeating pattern of an index hole and a rectangular cutout to ...
Page 36 - Install the cassette see
28 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Loading the Laminate Step 5. Rotate the core to adjust the laminate overhang. Stop when the end of the laminate (not the edge of the index hole) is just beyond the lip of the cassette, as shown on Page 22 . Step ...
Page 37 - Using Partial-Width Laminate; Laminates come in three widths:; BACK OF CARD
2: Installation and Setup Loading the Laminate P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 29 Using Partial-Width Laminate Laminates come in three widths: “Full-Width” laminate is 2 in (51 mm) wide. The full-width laminate is used on the front (i.e., upper) or back (i.e., lower) surfa...
Page 38 - Remove the Lower Laminate Cassette see
30 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Loading the Laminate Using Partial-Width Laminate (continued) Step 1. Remove the Lower Laminate Cassette; see Page 19 . Step 2. Open the cassette, and remove the laminate if present. Step 3. Load the partial-widt...
Page 39 - Connecting Power; Place the Printer’s power switch in the OFF (; DO NOT switch the printer on.
2: Installation and Setup Connecting Power P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 31 Connecting Power Step 1. Place the Printer’s power switch in the OFF ( )position. Step 2. Depending on your local AC voltage, plug the appropriate power cord into the Printer’s power connector an...
Page 40 - Connecting the Printer to your Computer; Interface Connector Locations; See
32 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Connecting the Printer to your Computer Connecting the Printer to your Computer Interface Connector Locations USB 10/100base-T See Page 33 for details. See Page 34 for details.
Page 41 - USB Connection; Connect the USB cable to the printer and the computer.
2: Installation and Setup Connecting the Printer to your Computer P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 33 USB Connection Step 1. Connect the USB cable to the printer and the computer. Step 2. Ensure that the printer’s power switch in the OFF ( ) position. USB
Page 42 - Ethernet Connection; Turn the printer’s power switch to the ON (
34 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Connecting the Printer to your Computer Ethernet Connection Step 1. Connect the Ethernet Port on the rear of the printer to an Ethernet Network Port. Step 2. Turn the printer’s power switch to the ON ( | ) positi...
Page 43 - Installing the Windows Printer Driver; Installing the USB Printer Driver
2: Installation and Setup Installing the Windows Printer Driver P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 35 Installing the Windows Printer Driver Installing the USB Printer Driver Step 1. If not already done, connect power to the printer. Turn power OFF. Step 2. Connect the USB por...
Page 44 - InstallShield Wizard
36 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Installing the Windows Printer Driver Step 8. The InstallShield Wizard window will open. To proceed with the installation, click the Next button. Step 9. Select Install USB printer drivers , and click the Next bu...
Page 45 - License Agreement; I accept; Next
2: Installation and Setup Installing the Windows Printer Driver P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 37 Step 11. This will bring up the License Agreement window. To proceed, select the I accept the terms of the license agreement option ; and click the Next button. Step 12. This...
Page 47 - Observe the driver installation via; Setup Status; The; Congratulations; window will appear. Turn on the USB printer. Read the
2: Installation and Setup Installing the Windows Printer Driver P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 39 Step 15. Observe the driver installation via Setup Status window. Step 16. The Congratulations window will appear. Turn on the USB printer. Read the instructions carefully, a...
Page 48 - When the; InstallShield Wizard Complete; window appears, click the; Finish; This completes USB driver installation.; Printing
40 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Installing the Windows Printer Driver Step 17. When the InstallShield Wizard Complete window appears, click the Finish button. Step 18. This completes USB driver installation. Note • For optimum performance, you ...
Page 49 - Installing the Ethernet Printer Driver; Printer Info
2: Installation and Setup Installing the Windows Printer Driver P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 41 Installing the Ethernet Printer Driver Preparation Before proceeding with the installation, you will need the IP Address of the Printer. Step 1. The IP Address is accessed vi...
Page 50 - Installation
42 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 2: Installation and Setup Installing the Windows Printer Driver Installation Step 1. If not already done, connect power to the printer. Turn power ON ( | ). Step 2. Connect the Ethernet port on the rear of the printer to the Ethernet netw...
Page 51 - window will open. To proceed with the installation, click; Select; Install Ethernet printer drivers
2: Installation and Setup Installing the Windows Printer Driver P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 43 Step 8. The InstallShield Wizard window will open. To proceed with the installation, click the Next button. Step 9. Select Install Ethernet printer drivers , and click the Ne...
Page 53 - Search Ethernet Printers; Location
2: Installation and Setup Installing the Windows Printer Driver P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 45 Step 13. This will bring up the Search Ethernet Printers window. Based on the network configuration in use, select the Printer IP Version (IPv4 or ipV6); and click the Refres...
Page 55 - Observe the; This completes Ethernet driver installation.
2: Installation and Setup Installing the Windows Printer Driver P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 47 Step 17. Observe the Setup Status window. Step 18. When the InstallShield Wizard Complete window appears, click the Finish button. Step 19. This completes Ethernet driver ins...
Page 57 - Operation; • Install the Printer Driver Software (
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 49 3 Operation Introduction Printing with the Card Printer is similar to printing with any other printer in a Windows environment. • Install the Printer Driver Software ( Section 2 , Installing the Windows Printer Driver ). • Connect the Pri...
Page 58 - Printing a Test Card; Start > Devices and Printers; Test Print
50 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 3: Operation Printing a Test Card Printing a Test Card To print a test card: 1. Access the Card Setup Tab: Select Start > Devices and Printers . Then right click the Zebra ZXP Series 7 Card Printer listing, and select Printing Preferen...
Page 59 - Manual Card Feed; Access the Card Setup Tab: Select; Apply; Click the
3: Operation Manual Card Feed P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 51 Manual Card Feed A Manual Feed Slot, located in the right-hand side of the Printer, is available for feeding single cards. 1. Access the Card Setup Tab: Select Start > Devices and Printers . Then right cli...
Page 61 - Operator Control Panel (; OCP; • Press the; button, to access and view the Printer Settings Menu.; Messages
3: Operation Operator Control Panel (OCP) P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 53 Operator Control Panel ( OCP ) The printer is equipped with an OCP Display and three “soft” OCP Buttons which give access to the printer menus. The menus can be accessed when the printer status sh...
Page 62 - Operational
54 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 3: Operation Operator Control Panel (OCP) Operational MESSAGE DESCRIPTION ALARM An error message needs to be cleared before normal operations can resume. CANCELING The Cancel button was pressed, and the current operation is being terminat...
Page 63 - Warning Messages; Refer to
3: Operation Operator Control Panel (OCP) P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 55 Warning Messages Warnings alert the operator to action that should be taken; the printer will generally continue operation. Error Messages Refer to Section 7 , Troubleshooting , for a list of the ...
Page 64 - Printer Menu Information; Main Menu
56 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 3: Operation Operator Control Panel (OCP) Printer Menu Information The OCP Display and three OCP Buttons give access to the printer menus. Main Menu Main Menu MENU Button (Operating Mode Display) RETURN PRINT TEST CARDS NETWORK SETTINGS A...
Page 65 - Info Menu
3: Operation Operator Control Panel (OCP) P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 57 Info Menu • Press the PREV button to move up the menu list • Press the NEXT button to move down the menu list • Press the EXIT button to return to the Operational Mode Display PRINTER INFO NETWORK...
Page 67 - Network Settings Menu
3: Operation Operator Control Panel (OCP) P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 59 Network Settings Menu Network Settings Menu UP DOWN SELECT Main Menu RETURN WITHOUT SAVE Enables or disables the DHCP Mode. Changes the IP Address. Changes the Subnet Mask. SAVE SETTINGS DHCP MODE...
Page 68 - Advanced Settings Menu
60 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 3: Operation Operator Control Panel (OCP) Advanced Settings Menu Advanced Settings Menu UP DOWN SELECT Main Menu RETURN Displays current language, sets language option (English, French, Spanish, German, Brazilian Portuguese, or Italian). ...
Page 70 - Wireless Settings Menu
62 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 3: Operation Operator Control Panel (OCP) Wireless Settings Menu Wireless Settings Menu UP DOWN SELECT Enables or disable the Radio. Main Menu RETURN WITHOUT SAVE SAVE SETTINGS RADIO CONTROL SETUP WIZARD DHCP MODE SET IP ADDRESS SET SUBNE...
Page 73 - Printer Settings and; Printer Properties
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 65 4 Printer Settings and Adjustments Introduction This section describes settings and adjustments that can be made to your Windows Driver. This consists of two major topics: Printer Properties . . . . . . . . . . . . . . . . . . . . . . . ....
Page 75 - General Tab; Comment; Printing Preferences; Print Test Page
4: Printer Settings and Adjustments Printer Properties P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 67 General Tab The General tab shows the name, location, model number, and features of the printer. • Location - Lets you specify where the printer is physically located. • Comment - Let...
Page 76 - Sharing Tab; Note that for Windows Vista and above, the; Change Sharing Options; button to enable this tab.
68 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 4: Printer Settings and Adjustments Printer Properties Sharing Tab The Sharing tab lets you share the printer over the network and install additional drivers to accommodate different operating systems. Note that for Windows Vista and abov...
Page 77 - Ports Tab; • Enable printer pooling see; Enable bi-directional support; you will lose the communication to the printer.
4: Printer Settings and Adjustments Printer Properties P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 69 Ports Tab Use the Ports tab to specify the computer port to which the printer is connected. This will have been established at the initial installation of the printer and will not nor...
Page 78 - Advanced Tab
70 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 4: Printer Settings and Adjustments Printer Properties Advanced Tab The Advanced tab determines the spooling (queuing) of print jobs and determines how spooled jobs are handled relative to the most recent job. For details, see Windows-pro...
Page 79 - Color Management Tab; Color Management
4: Printer Settings and Adjustments Printer Properties P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 71 Color Management Tab This is the standard Windows color management screen, showing user access to various printer control options. Click the Color Management button to enable this tab...
Page 80 - Security Tab
72 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 4: Printer Settings and Adjustments Printer Properties Security Tab This is the standard Windows security screen, showing user access to various printer control options. For details, see Windows-provided help for standard property pages.
Page 81 - Device Information Tab; • The; Media Info; button takes you to the Media Info screen see next page.; ZXP Toolbox; button takes you to the ZXP Toolbox which provides advanced
4: Printer Settings and Adjustments Printer Properties P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 73 Device Information Tab The Device Information tab provides device information, security related information, and printer usage. Access to Media Info and ZXP Toolbox is included. • The...
Page 82 - Ribbon; : Shows the top laminate type and the number of laminate; Bottom Laminate; : Shows the bottom laminate type and the number of laminate
74 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 4: Printer Settings and Adjustments Printer Properties Media Info Media Info screen shows ribbon status and top and bottom laminate status. - Ribbon : Shows the ribbon type installed and the number of ribbon sets remaining. - Top Laminate...
Page 84 - Card Setup Tab; Card options; allows the user to select the Card Source and Card Destination.
76 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 4: Printer Settings and Adjustments Printing Preferences Card Setup Tab Card Setup tab allows the user to adjust selected card and print job parameters. • Card options allows the user to select the Card Source and Card Destination. - Card...
Page 86 - Black Panel Options
78 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 4: Printer Settings and Adjustments Printing Preferences • Ribbon info and options : - Ribbon type shows the type of ribbon (e.g., YMCKOK) installed in the printer. Note that this is automatically detected from the ribbon. - Ribbon combin...
Page 87 - From the; Ribbon Combination; that has YMC and K all on the same
4: Printer Settings and Adjustments Printing Preferences P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 79 Black Panel Options The Black Panel Options pop-up window allows you to manage and configure the use of the Black Panel (K panel) extraction when the selected Ribbon Combination sho...
Page 88 - Black level
80 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 4: Printer Settings and Adjustments Printing Preferences To extract black areas from color images, several selections can be made. • Select black panel extraction type: - Disable black extraction does not use the K panel for any part of t...
Page 89 - Defined areas
4: Printer Settings and Adjustments Printing Preferences P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 81 • Black extraction from color images (continued) - Area manager: This option is enabled when the Defined areas (extract inside the zone) or the Except defined areas (extract outside...
Page 90 - Overlay Varnish Options; Full overlay varnish
82 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 4: Printer Settings and Adjustments Printing Preferences Overlay Varnish Options Overlay varnish is a durable layer of film applied to printed cards that reduces fading by protecting the image from UV exposure. The Overlay Varnish pop-up ...
Page 91 - UV Panel Options; This mode will render the UV content using error diffusion.; Grayscale; UV printing options:; rotates the provided bitmap image 180; Invert UV content; inverts the bitmap image if not inverted in the application.
4: Printer Settings and Adjustments Printing Preferences P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 83 UV Panel Options A UV Panel is used to print images (text or graphics) that will glow in the visible spectrum when exposed to a UV Light. The UV Panel pop-up window is only availabl...
Page 92 - Source of UV content; Each print job will send a unique UV image along with
84 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 4: Printer Settings and Adjustments Printing Preferences Source of UV content • Use unique image for each job: Each print job will send a unique UV image along with the YMCK content. • Bitmap based static image : Imports the bitmap image ...
Page 93 - • Extract UV from job image
4: Printer Settings and Adjustments Printing Preferences P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 85 • Extract UV from job image Similar to K extraction, this mode allows you to print a selected portion of the YMC image using the UV panel. Options include Defined areas , Except def...
Page 94 - button; Static Text Options; button to activate this option.; button to close the UV Panel pop-up window.
86 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 4: Printer Settings and Adjustments Printing Preferences Add static text: When the Add static text checkbox is selected (checked), the Static Text Options button is enabled. This option automatically prints a unique text value in a fixed ...
Page 95 - Encoding Tab; ZXP Series Toolbox
4: Printer Settings and Adjustments Printing Preferences P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 87 Encoding Tab The Encoding tab lets you manage the various magnetic and smart card encoding options. • Magnetic encoding : - Disable magnetic encoding : Prevents the printer from enc...
Page 96 - Text; text and graphics appear lighter.; Mixed; Advanced; Monochrome Red Optimization
88 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 4: Printer Settings and Adjustments Printing Preferences Black Panel (K) Optimization Tab The Black Panel (K) Optimization tab displays two identical adjustment sections (Front and Back) to optimize black panel printing for the type of im...
Page 97 - Monochrome conversions; : This section is used to control multi-tone printing when using; Threshold; lighten the image or to the left to darken the image.; Contrast; the slider to the right to increase the contrast and vice versa.
4: Printer Settings and Adjustments Printing Preferences P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 89 Advanced Black Panel (K) Optimization The Advanced Black Panel (K) Optimization tab optimizes black panel printing for the type of image being printed; i.e., text, barcode, or mixed...
Page 99 - Monochrome Conversion; Use on pictures. Image content dictates if error diffusion or; • Dither 6x6 halftoning; Threshold (also know as
4: Printer Settings and Adjustments Printing Preferences P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 91 Monochrome Conversion The monochrome panels in the ribbon can only print binary (pure on or off) images. Monochrome conversion is used to convert continuous tone 8-bit-per-pixel RGB...
Page 100 - These color adjustments modify only how the pictures; • Full color printing:; and; are reflected in the preview image.; Sharpening filter; are not reflected in the preview image.; Preheat
92 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 4: Printer Settings and Adjustments Printing Preferences Color (YMC) Optimization Tab These color adjustments modify only how the pictures print . These adjustments have no effect on the image files. (That type of adjustment would be made...
Page 101 - Intensity; button to access to the Advanced Color (YMC) Optimization pop-
4: Printer Settings and Adjustments Printing Preferences P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 93 - Intensity adjustments for Yellow, Magenta, and Cyan range from -10 to +10. By default, the Maintain YMC ratio checkbox is selected; so all three sliders move at the same time. Wit...
Page 102 - • The Gamma slider adjusts the mid-range darkness of the image.
94 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 4: Printer Settings and Adjustments Printing Preferences Advanced Color (YMC) Optimization Full color printing adjustments range from -25 to +25 and are reflected in the preview image. All the changes to the image are only done to the ima...
Page 103 - About Tab; The About Tab shows the copyright and the driver version for the
4: Printer Settings and Adjustments Printing Preferences P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 95 About Tab The About Tab shows the copyright and the driver version for the Zebra ZXP Series 7 Card Printer .
Page 106 - ZXP Series Toolbox Access; To access the ZXP Series Toolbox from the printer driver, select; The ZXP Series Toolbox can also be accessed via
98 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox ZXP Series Toolbox Access ZXP Series Toolbox Access To access the ZXP Series Toolbox from the printer driver, select Start > Devices and Printers . Then right-click the Zebra ZXP Series 7 Card Printer listing, and...
Page 107 - Information; Printer; information includes the IPv4 address, Gateway, Subnet mask,
5: ZXP Series Toolbox Information P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 99 Information Printer Printer information cannot be edited or changed by the user; however, this information may be useful for Zebra trained and certified personnel in diagnosing or evaluating printer statu...
Page 108 - Sensors; • Sensor States; displays “live” sensor states.; Sensor Values; displays “live” sensor values.
100 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox Information Sensors Sensors information cannot be edited or changed by the user; however, this information may be useful for Zebra trained and certified personnel in diagnosing or evaluating printer status. • Sensor...
Page 109 - Media; • Ribbon Details
5: ZXP Series Toolbox Information P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 101 Media Media characteristics cannot be edited or changed by the user; however, this information may be useful for Zebra trained and certified personnel in diagnosing or evaluating media status. • Ribbon D...
Page 110 - Laminator; • Status; shows the state of each laminator sensor.; Odometer; Cards processed, and the number of Cards laminated.
102 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox Information Laminator Laminator information cannot be edited or changed by the user; however, this information may be useful for Zebra trained and certified personnel in diagnosing or evaluating laminator status. • ...
Page 111 - Wireless Network; Save; button saves your wireless settings as XML files.
5: ZXP Series Toolbox Information P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 103 Wireless Network This information cannot be edited or changed by the user; however, this information may be useful for network administrators in diagnosing or evaluating wireless network status; see Wire...
Page 112 - Configuration; Job Log; real data; Enable logging; ZXPLog; Delete log Files
104 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox Configuration Configuration Job Log The Job Log is a utility that builds a database of card transactions in the printer’s host computer. The Job Log records the data encoded on the card’s magnetic stripe, together w...
Page 114 - Restore
106 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox Configuration Save/Restore When you set up a printer, you should save the printer and driver configuration settings; then, when you restore or add additional printers, you can use the saved configuration to ensure c...
Page 115 - Firmware and Lookup Tables; Select Firmware to Download
5: ZXP Series Toolbox Configuration P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 107 Firmware and Lookup Tables The Firmware and Lookup Tables screen allows you to install firmware and check for firmware updates. This screen also allows you to download and select custom Lookup Tables. ...
Page 116 - Ftp Login
108 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox Configuration • Check Firmware Updates: To use this option, you must have an internet connection. 1. Click the Check Updates button; then enter the Server name, User name, and Password in the Ftp Login pop-up; and c...
Page 117 - Printer Settings; : This section allows you to change the various network
5: ZXP Series Toolbox Configuration P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 109 Printer Settings The Printer Settings screen allows you to change the OCP settings, set the network configuration parameters, change print performance settings, adjust the print offset and image fill, ...
Page 118 - Security Roles
110 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox Configuration • Print Performance Setting : Performance options from the dropdown menu include: - No error recovery (None): The printer provides high throughput with a hands-off error recovery policy. This allows th...
Page 119 - Wireless Settings; Wireless Reference
5: ZXP Series Toolbox Configuration P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 111 Wireless Settings The Wireless Settings screen allows you to connect a printer to a wireless network, or change the printer or network settings after you have installed the printer; see Wireless Refere...
Page 120 - Cleaning; Clean Printer; Clean; Clean; Clean the Feeder Path; Restore Defaults
112 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox Cleaning Cleaning Clean Printer The Clean Printer screen gives you the option to clean the printer via the Toolbox; refer to Section 6 , for cleaning via the OCP. • Card Path: The Card Path cleaning interval can be ...
Page 121 - Advanced Cleaning; Printhead cleaning has been completed successfully
5: ZXP Series Toolbox Cleaning P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 113 Advanced Cleaning The Advanced Cleaning screen gives you the option to polish the printhead via the Toolbox. Printhead polishing is used when “ghosting” artifacts appear on a printed card. • Configure Print...
Page 122 - Clean Laminator
114 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox Cleaning Clean Laminator The Clean Laminator screen gives you the option to clean the laminator via the Toolbox; refer to Section 6 , for cleaning via the OCP. • Laminator Card Path cleaning interval can be adjusted...
Page 123 - Print Test Card; Print Preferences; Advanced Black Panel Options; Overlay Varnish; Uv Panel Screen
5: ZXP Series Toolbox Print Test Card P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 115 Print Test Card Print Preferences The controls in this section function he same way as the controls for the Card Setup Tab on page 76 ; see that section for details. Advanced Black Panel Options The ...
Page 124 - Optimization Tab; Preview profile; Preview; Advanced Color
116 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox Print Test Card Color (YMC) Optimization The controls in this section function he same way as the controls for the Color (YMC) Optimization Tab on page 92 ; see that section for details. Profile Handling: You can sa...
Page 125 - button to access to the Advanced Black panel (K) Optimization
5: ZXP Series Toolbox Print Test Card P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 117 Black Panel (K) Optimization The controls in this section function he same way as the controls for the Black Panel (K) Optimization Tab on page 88 ; see that section for details. Click the Advanced b...
Page 126 - Print Sample Card; Test Card Library; Step a; Set As Back
118 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox Print Test Card Print Sample Card When printing a sample card, all the settings from Printing Preferences, Color (YMC) Optimization, and Black Panel (K) Optimization are applied. All the sample cards in the Test Car...
Page 128 - Technology; Magnetic Encoding; Appendix D; • Settings; High
120 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox Technology Technology Magnetic Encoding The Magnetic Encoding screen allows the user to set various magnetic encoding options. For more information on magnetic encoding, refer to Appendix D . • Settings Before using...
Page 129 - Read
5: ZXP Series Toolbox Technology P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 121 • Encode/Read Data Hex: Select this checkbox to encode the tracks using hexadecimal format. Track selection: - For reading: Click the checkboxes to select Track 1 , Track 2 , and/or Track 3 ; click the Re...
Page 130 - Smart Card; Appendix E; Feed Card
122 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox Technology Smart Card The Smart Card screen allows the user to test various smart card encoding options. For more information on smart card encoding, refer to Appendix E . • Card Readers: - Select the card reader fr...
Page 131 - Input
5: ZXP Series Toolbox Technology P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 123 • Card Types (continued): - Input Data: Includes address, length, input, and PIN . • Writing Data: Set the address, set the length, enter data in Input field, and click the Write button. • Reading Data: A...
Page 132 - Advanced Security; Configure Security; • Toolbox Password; Enter the new password on the
124 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox Advanced Security Advanced Security Configure Security • Toolbox Password Enabling driver password protection prevents unauthorized persons from changing the printer configuration settings. Access to various Toolbox...
Page 134 - • To set security access roles:; restrict specific features from the selected user role.
126 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 5: ZXP Series Toolbox Advanced Security Security Roles Use this section to establish security roles; i.e., grant and restrict access to various ZXP Series Toolbox features. The list of users in the drop-down menu (e.g., Guest, HelpAssist...
Page 135 - Print Viewer; Print PRN file; • To send a PRN file to the printer:; Click the Print button to print the default PRN file.; Browse; button to select and print a PRN file of your choice.; Open
5: ZXP Series Toolbox Print Viewer P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 127 Print Viewer When a PRN file is printed, printer drivers are bypassed; but the print spooler is still required since communication to the printer is via the print spooler. This diagnostic utility can be...
Page 137 - leaning; To order ZXP Series 7 cleaning supplies, see
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 129 6 C leaning 6.1 Introduction The regular use of cleaning cards will clean and maintain important parts of your printer that cannot be reached: including the Printhead, the Transport Rollers, and the Magnetic Encoder Station (optional fea...
Page 138 - Cleaning the Printer; When to Clean; • Card Path cleaning should occur every 5,000 cards.; Initiate the Cleaning Process; the; display the
130 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 6: Cleaning Cleaning the Printer Cleaning the Printer When to Clean Cleaning requirements vary according to the environment. For a typical office environment, the recommended cleaning cycle is: • Card Path cleaning should occur every 5,0...
Page 141 - Polish the Printhead
6: Cleaning Cleaning the Printer P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 133 Polish the Printhead The Advanced Cleaning button in the Clean Printer section of the ZXP Toolbox provides access to printhead polishing. When printhead polishing is enabled in the ZXP Toolbox, printhead ...
Page 142 - Cleaning the Laminator; Initiate the cleaning process:
134 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 6: Cleaning Cleaning the Laminator Cleaning the Laminator When to Clean Cleaning requirements vary according to the environment. For a typical office environment, the recommended cleaning cycle is: • Laminator Card Path cleaning should o...
Page 143 - Clean the Laminator Card Path; CLEAN LAM CARD PATH
6: Cleaning Cleaning the Laminator P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 135 Clean the Laminator Card Path Step 1. From the Clean Printer Menu, select CLEAN LAM CARD PATH to run the Laminator Cleaning Routine; and follow the OCP instructions. Step 2. Wait until the oven temperat...
Page 144 - Clean the Laminator Media Rollers; CLEAN LAM ROLLERS
136 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 6: Cleaning Cleaning the Laminator Clean the Laminator Media Rollers Step 1. From the Clean Printer Menu, select CLEAN LAM ROLLERS to run the Laminator Media Roller Cleaning Routine; and follow the OCP instructions. Step 2. Open the lami...
Page 145 - Prepare a second Cleaning Swab.
6: Cleaning Cleaning the Laminator P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 137 Step 7. For dual-sided laminators only : Locate the bottom roller (circled below) for the lower cassette. Step 8. Prepare a second Cleaning Swab. Step 9. Locate the bottom roller (circled below) for the...
Page 146 - Clean the Laminator Oven (Heater Rollers); From the Clean Printer Menu, select
138 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 6: Cleaning Cleaning the Laminator Clean the Laminator Oven (Heater Rollers) Step 1. From the Clean Printer Menu, select CLEAN LAM OVEN; and follow the OCP instructions. Step 2. Wait until the oven temperature falls below 60 o C. Step 3....
Page 149 - Dual Cleaning Cartridge; Installation of the Dual Cleaning Cartridge is described in; Manual Feed Cleaning Cassette; Installation of the Cleaning Cassette is described in detail in
6: Cleaning Dual Cleaning Cartridge P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 141 Dual Cleaning Cartridge The Dual Cleaning Cartridge cleans the cards entering the printer via the card feeder. To ensure print quality, the card cleaning rollers inside the cartridge require periodic r...
Page 151 - Troubleshooting
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 143 7 Troubleshooting Introduction The table on the next page offers causes and solutions to symptoms related to improper operation. Check the table on the following pages when experiencing any loss of operation or print quality. For additio...
Page 152 - OCP Error Messages; If the; Possible Solution; does not solve your problem, contact
144 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 7: Troubleshooting Introduction OCP Error Messages Important • If the Possible Solution does not solve your problem, contact Zebra Technical Support . CODE MESSAGE POSSIBLE CAUSE POSSIBLE SOLUTION 5 FIRMWARE UPGRADE ERROR Firmware upgrad...
Page 158 - Test Card Images
150 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 7: Troubleshooting OCP Test Cards OCP Test Cards Test Card Images Test Card Descriptions GRADIENT BOXES DENSITY SETUP MONOCHROME ONLY Image Title Description Use GRADIENT BOXES 3 sets of light-to-dark grayscale ramps Used to create color...
Page 159 - Ethernet; • Issues; If both; network cable, contact Technical Support for assistance.
7: Troubleshooting Ethernet P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 151 Ethernet • Indicators -- Detail • Link Speed Indicator (Orange) • Link Activity Indicator (Green) • Issues If both LEDs are off, the printer has not detected the presence of a network cable. To solve the probl...
Page 161 - Technical Specifications; Standard features
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 153 8 Technical Specifications Standard features • 300 dpi (11.8 dots/mm) print resolution,• Image size 1006 * 640 pixels• USB 2.0 and Ethernet 10/100 connectivity• Microsoft Windows Certified drivers • 200 card capacity feeder (30 mil)• 20 ...
Page 162 - Specifications; Encoding options and specifications; Magnetic stripe encoder – AAMVA and; Software; and development environments; Printing and laminating specifications; • Printing and magnetic stripe encoding throughput
154 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 8: Technical Specifications Specifications Specifications Encoding options and specifications • Magnetic stripe encoder – AAMVA and ISO 7811 (new and pre-encoded, tracks 1, 2, and 3, high and low coercivity) • ISO 7816 Smart Card Contact...
Page 163 - Simultaneous printing, encoding, and laminating capability; Dimensions are in millimeters
8: Technical Specifications Specifications P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 155 • Near photographic print quality• Edge-to-edge printing on standard CR-80 media - Image placement specification: - Skew: ± .05 mm • Simultaneous printing, encoding, and laminating capability • ...
Page 164 - Supplies specifications; ribbons and; Card specifications/compatibility; Technology Cards: contact and contactless smart cards
156 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 8: Technical Specifications Specifications Supplies specifications • Zebra’s intelligent technology RFID tags authenticate and automate ix Series™ ribbons and Zebra True Secure™ i Series laminates to assure the best quality possible • Ca...
Page 165 - Communications interfaces; FCC Class A; Physical characteristics
8: Technical Specifications Specifications P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 157 Communications interfaces • USB V2.0 • USB supports plug-n-play printer identification• 10/100 BaseT Electrical specifications • Auto-switching single-phase AC power• 90V~264V AC and 47–63Hz (50...
Page 166 - Environmental; Chinese Notifications; 仅适用于在非热带气候条件下安全使用
158 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 8: Technical Specifications Specifications Environmental • Operating Temperature: 59º F/15ºC to 95º F/35ºC• Storage Temperature: 23º F/-5ºC to 158º F/70ºC• Operating Humidity: 20% to 80% inclusive, non-condensing• Storage Humidity: 10% t...
Page 167 - Appendix A; Connecting to a Network; Printer Sharing
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 159 Appendix A Connecting to a Network Introduction Card printers can be connected to an Ethernet network in three ways. Printer Sharing In printer sharing, the printer is connected locally to the host computer and configured to be shared to...
Page 168 - External Print Server
160 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 A: Connecting to a Network External Print Server A stand alone device that acts as a server on the network specifically for receiving print jobs and passing them to the printer. Client computers connect to the print server over a network...
Page 169 - Setting Up a Network Printer; Section 2; Add Printer Wizard; Devices and Printers.; Devices and Printers; Add a printer; What type of printer do you want to install; Add a local printer
A: Connecting to a Network P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 161 Setting Up a Network Printer Use this procedure if you have already installed an Ethernet printer on your system (refer to Section 2 ), and you want to install a second Ethernet printer on the network via the M...
Page 170 - Choose a printer port; Create a new port; Enter Printer IP Address
162 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 A: Connecting to a Network Step 6. Observe the Choose a printer port window. Step 7. Select the Create a new port radio button (1st arrow above). Step 8. From the dropdown menu, select Zebra ZXP Series 7 Card ... (2nd arrow above). Step ...
Page 171 - Install the printer driver; Which version of the driver do you want to use; Select the
A: Connecting to a Network P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 163 Step 13. Observe the Install the printer driver window. Step 14. Select the Manufacturer and the Printers (arrows above). Step 15. Click the Next button. Step 16. Observe the Which version of the driver do you ...
Page 172 - Type a printer name; Set as the default printer
164 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 A: Connecting to a Network Step 19. Observe the Type a printer name window. Step 20. Enter the printer name: use the default name, or add more information to indicate the printer location; e.g., Ed’s Printer, Mike’s Office, Room 33, etc....
Page 173 - Printer Pooling; Setting Up Printer Pooling; Enable printer pooling
A: Connecting to a Network P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 165 Printer Pooling Setting Up Printer Pooling Printer Pooling is a standard feature of Windows, which lets you spread the printed output across a pool of several printers. In this example, we will install and setu...
Page 174 - Using the Printer Pool; through the pool (which can produce; Send print jobs to the printer pool,; not; to an individual printer.; sending print jobs; separately
166 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 A: Connecting to a Network Using the Printer Pool When the first printer has taken as many jobs as it can handle (that being two jobs - one to be printed immediately, the other waiting), the following jobs “spill over” to the second prin...
Page 175 - Appendix B; Accessing a Network Printer
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 167 Appendix B Accessing a Network Printer via a Web Browser Introduction If the printer is connected to a local Ethernet network, it can be accessed via a Web Browser. This section describes how to access the printer’s web page using a comp...
Page 176 - Procedure; Start your Web Browser.
168 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 B: Accessing a Network Printer via a Web Browser Procedure Step 1. Start your Web Browser. Step 2. In the browser address bar, enter the IP address of the printer connected to the local Ethernet network. Step 3. The printer’s web page wi...
Page 177 - Continue selecting tabs as necessary.
B: Accessing a Network Printer via a Web Browser P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 169 Step 6. The selected tab will be displayed; in this case, Printer Information. Step 7. Continue selecting tabs as necessary. Step 8. When done, close the browser (click the red X-button in...
Page 179 - PPENDIX; WiFi Connectivity; antenna and the access point antenna.
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 171 A PPENDIX C WiFi Connectivity Introduction This Appendix provides information about installing and connecting a Zebra ZXP Series 7 Card Printer (with the Wireless Option) to a wireless network. A printer with the wireless option ships wi...
Page 180 - Communication; The wireless printer communicating over 802.11b radio:; Security; The wireless printer supports Open System authentication.; Encryption; • CCMP (a form of AES encryption applicable to WPA2)
172 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 C: WiFi Connectivity Description Communication To connect to a wireless network, the printer uses wireless protocol IEEE 802.11b/g that communicates data through radio transmission and can talk to Access Points that are either 802.11b or...
Page 181 - Web Browser Installation; Wireless Reference Manual; Minimum requirements:; Wired Ethernet; Passphrase; ZXP Series 7 Printer
C: WiFi Connectivity P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 173 Web Browser Installation This section explains how to connect your ZXP Series 7 Printer to a wireless network via your Web Browser. You can also use the OCP or the ZXP Toolbox; see Wireless Reference Manual P1035089-...
Page 182 - Connect the printer to your wired network, and turn the power on.
174 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 C: WiFi Connectivity Installation Step 1. Connect the printer to your wired network, and turn the power on. Step 2. Use the INFO screens to get the Wired IP Address. Step 3. Start your Web Browser. Step 4. In the browser address bar, ent...
Page 183 - The Choose WiFi Connection page will be displayed.; Scan for Wireless Networks
C: WiFi Connectivity P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 175 Step 7. In the Windows Security dialog box: Type "admin" into the User name field. Type “1234: into the Password field. Click the OK button. Step 8. The Choose WiFi Connection page will be displayed. Step 9. ...
Page 184 - The expanded Choose WiFi Connection page will be displayed.; Connect to Selected Wireless Network; button. If the desired network is still not displayed, click the; Update Scan for Wireless Networks; button until the network appears.
176 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 C: WiFi Connectivity Step 10. The expanded Choose WiFi Connection page will be displayed. Step 11. Select the radio button of the desired network, in this case ZPNI (arrow above); and click the Connect to Selected Wireless Network button...
Page 185 - Connect; Close the printer’s web page.
C: WiFi Connectivity P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 177 Step 12. When the Load Access Point Attributes page appears, enter the network Passphrase; and click the Connect button. Step 13. When successfully connected to the wireless network, the Input Accepted page will appe...
Page 186 - Printer Driver Installation; Test; This completes the wireless printer installation process.
178 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 C: WiFi Connectivity Printer Driver Installation Step 1. Install the printer driver for the Wireless Ethernet connection to the printer; see Installing the Ethernet Printer Driver on page 41 for details. Note: Enter the wireless IP Addre...
Page 187 - Magnetic Card Encoder
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 179 Appendix D Magnetic Card Encoder Introduction This Appendix includes operation and maintenance requirements for Printers with the optional magnetic card stripe encoder. The magnetic encoder can be set for either high coercivity (HiCo) or...
Page 188 - Initial Setup; Magnetic encoder verification; : Selections are High or Low depending on the card type.; Magnetic encoding type; button, then click the
180 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 D: Magnetic Card Encoder Driver Settings (Printing Preferences) Initial Setup Step 1. Select the Encoding tab. Step 2. Make your selection(s) for Magnetic encoding: • Magnetic encoder verification : When selected, the protocol is (1) Wri...
Page 189 - Print front; Yes
D: Magnetic Card Encoder P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 181 Stripe-Up Encoding For printing and encoding with the mag stripe on the front of the card, use the Print front image on back side option; and select Yes from the dropdown menu (circled below).
Page 190 - Card Loading Orientation; For Cards with a Barcode, see
182 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 D: Magnetic Card Encoder Card Loading Orientation Place the cards in the Feeder Cartridge in the correct orientation as shown (with the magnetic stripe to the left and to the rear). Ensure that the cards are seated properly the hopper. F...
Page 191 - Functional Check; Encode
D: Magnetic Card Encoder P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 183 Functional Check To check the operation of the mag encoder, you will need the ZXP Toolbox. Select Start > Devices and Printers . Then right-click the Zebra ZXP Series 7 Card Printer listing, and select Propert...
Page 192 - Magnetic Encoding Type; Encoding for the three tracks uses the ISO 7811 format.
184 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 D: Magnetic Card Encoder Magnetic Encoding Type ISO (Default) The encoder reads and writes standard ISO track data formats in standard ISO track locations. The following shows the three standard ISO tracks. Each track can be encoded and ...
Page 193 - AAMVA; Alpha-numeric characters on Tracks 1 and 3, numerals only on Track 2.; CUSTOM; density; sentinel; value in the standard ISO format will be substituted.); BINARY; binary
D: Magnetic Card Encoder P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 185 AAMVA The data stored on magnetic stripes on American driver's licenses is specified by the American Association of Motor Vehicle Administrators (AAMVA). Alpha-numeric characters on Tracks 1 and 3, numerals only ...
Page 194 - Encoder Macro Commands; Supported Macro commands are:
186 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 D: Magnetic Card Encoder Encoder Macro Commands With ZXP Series 7Card Printers, we provide support for pass-through magnetic encoding commands. The application developer or user can use a preamble or Macro to indicate to the driver that ...
Page 195 - Smart Card Options
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 187 A PPENDIX E Smart Card Options Introduction This Appendix contains information on the additional operations of a Printer equipped with one or more of the available Smart Card options. Smart Cards can have a built-in microcomputer and/or ...
Page 196 - Contact Smart Cards; External; Contact Encoder; Card Loading Orientation for Contact Smart Cards
188 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 E: Smart Card Options Contact Smart Cards Contact Smart Cards have a pad of contacts on the surface of the card that connect to the circuitry embedded into the card. The printer responds to commands that position the card at the contact ...
Page 197 - External Contact Station Interface
E: Smart Card Options P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 189 External Contact Station Interface When a command to the printer interface sends a card to the External Contact Station, the printer connects the External Contact Station to the female DB-9 connector on the rear of ...
Page 198 - Contactless Smart Cards; Card Loading Orientation for Contactless Smart Cards; For Contactless Smart Cards, orientation is not a consideration.; Printing on Contactless Smart Cards
190 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 E: Smart Card Options Contactless Smart Cards Rather than using a contact pad, Contactless Smart Cards use various radio technologies to “connect” to the printer. The printer moves the card to an antenna location on the card path, and th...
Page 199 - Encoding over Ethernet; Overview; Encoding over Ethernet functionality is enabled via the OCP see
E: Smart Card Options P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 191 Encoding over Ethernet Overview The ZXP Series 7 printer firmware, ZMotif SDK, and device drivers allow application developers to use Zebra’s current USB based contact/contactless encoder module over the Ethernet (w...
Page 200 - SDK Support
192 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 E: Smart Card Options SDK Support The ZMotif SDK supports the following features: • Retrieve contact and contactless smart card module enumerated names. • Establish a connection to the encoder. • Disconnect from the encoder. The SDK incl...
Page 201 - Barcode Reader; number of 12 characters.
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 193 Appendix F Barcode Reader Description The Barcode Reader can identify a card with a unique Embedded Inventory Number (EIN) in the form of a preprinted barcode located on the trailing edge of the back side of the card. • For barcode symbo...
Page 202 - Barcode Placement; • For a Standard Card or Smart Card:; placed on the backside of the card only, not the front side.
194 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002 F: Barcode Reader Barcode Placement • For a Standard Card or Smart Card: • For a Magnetic Stripe Card: The left and right sides of the barcode symbol include a quiet zone with no print to prevent interference with the Barcode Reader. The...
Page 203 - • Feeder Cartridge orientation:; or higher for details.
F: Barcode Reader P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 195 Loading Cards The pictures below show the proper orientation of cards with a barcode. This orientation is valid with or without the magnetic stripe. • Feeder Cartridge orientation: • Manual Feed Slot orientation: SDK Su...
