Yamaha X1RA0 - Manuals

1. Electric bike components A. Introduction Bluetooth ® The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by YAMAHA MOTOR CO., LTD. is under license. * Applies to Display C and Interface X. ANT+ T M Featuring certified wireless A...

C. Location of the warning and specification labels Read and understand all of the labels on your Battery Pack and Battery Charger. These labels con-tain important information for safe and proper operation. Never remove any labels from your Bat-tery Pack and Battery Charger:* The contents of the lab...

Battery Charger PASC4 PASC8/PASC11 Familiarize yourself with the following pictograms and read the explanatory text, then make sure to check the pictograms that apply to each part. 4 How to disconnect the plug. 1.GRASP 2.PULL Read Manual Do not disassemble Do not dispose of in a fire For indoor use ...

E. e-Bike Systems The e-Bike Systems are designed to give you the optimal amount of power assist. It assists you within a standard range based on factors such as your pedaling strength, bicycle speed, and current gear.The e-Bike Systems do not assist in the following situations: When the Display pow...

Conditions that could decrease range (remaining assist distance) The range (remaining assist distance) will decrease when riding in the following conditions: Frequent starts and stopsNumerous steep inclinesPoor road surface conditionsWhen riding together with childrenRiding into a strong head windLo...

F. Safety information Never use this Battery Charger to charge other electrical appliances. Do not use any other charger or charging method to recharge the Battery Packs. Using any other charger could result in fire, explosion, or damage the Battery Packs. This Battery Charger can be used by childre...

G. Instrument and control functions Display Unit (Display A2) USB port Assist mode indicator Speedometer Automatic Support Mode indicator Assist mode switch (up) Assist mode switch (down) Battery capacity indicator Function display Walk assist switch Light switch Power switch TIP The USB port is for...

Display Unit (Display A2) The Display Unit offers the following operations and infor-mation displays. Power on/off Each time you press the power switch, the power is turned on and off.When you turn on the power, all of the displays come up. After that, the main riding display is shown. TIP When you ...

Speedometer Battery capacity indicator Function display Speedometer The speedometer displays your bicycle speed (in kilome-ter per hour or mile per hour). To select the km/mile, see TIP If your bicycle speed is less than 2.0 km/h or 1.2 MPH, the Battery capacity indicator The battery capacity indica...

Walk assist When you are on or off the bicycle and start moving it, you can use walk assist without pedaling the bicycle.To use walk assist, change to any other assist mode than the Off Mode, and then press and hold the walk assist switch.Walk assist will not work in the following situations: When y...

Display Unit (Display B) The Display Unit offers the following operations and infor-mation displays. NOTICE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any...

Power off To main riding display. Language In Display B, you can select the language between the fol-lowing languages: SUPPORTED LANGUAGE DISPLAY English English German Deutsch French Français Dutch Nederlands Italian Italiano Spanish Español 1. Make sure that the power is turned off. When nothing i...

Power on/off Each time you press the power switch, the power is turned on and off.When you turn on the power, all of the displays come up. After that, the main riding display is shown. TIP When you turn on the power, the assist mode is auto-matically set to Off Mode.Keep your feet off the pedals whe...

Speedometer Speedometer The speedometer displays your bicycle speed (in kilome-ter per hour or mile per hour). To select the km/mile, see TIP If your bicycle speed is less than 2.0 km/h or 1.2 MPH, the Battery capacity indicator The battery capacity indicator displays an estimate of how much capacit...

Function display Function display The function display can display the following functions. OdometerTrip meterAverage bicycle speedMaximum bicycle speedRange (Remaining assist distance)Battery capacity (%)CadenceTrip time Push the function select switch, the display changes asfollows:Odometer Trip m...

Maximum bicycle speed This displays the maximum bicycle speed (in kilometers per hour or miles per hour) since it was last reset.When you turn off the power, the data up to that point will be saved.To reset the maximum bicycle speed, press the assist mode switch (up) and assist mode switch (down) si...

Main riding display Settings The display enables the following. ClockAdjust (Clock Adjust) Clock settingDistanceUnit (Distance Unit) km/mile settingDisplayItem (Display Item)Sets the items to be displayed in the function displayduring normal riding.RecordReset (Record Reset)Resets the values of the ...

DisplayItem (Display Item) You can select to show or hide different items in the func-tion display during normal riding.The items which you can select to show or hide are: (Trip meter), (Average bicycle speed), t- TIP You cannot hide the odometer indication. 1. Select an item by using the assist mod...

RecordReset (Record Reset) TIP You cannot reset the odometer. 1. Select an item by using the assist mode switches (up) or (down) and use the function select switch to place a check mark in the check box for the item that you want to reset. 2. switch, the items with check marks will be reset and the ...

Brightness You can set the display backlight state when the headlight is on and off. You can select between 3 brightness levels. [Setting the display backlight brightness when the head-light is on]1. Turn the headlight on by using the light switch.2. Select the display backlight brightness by using ...

To main riding display. LightMemory (Light Memory) Sets whether to ignore or save the on or off status of the headlight when the power of the e-Bike Systems is turned off. headlight will not be saved when the power of the e-Bike Systems is turned off. In addition, when turning on the e-Bike Systems,...

Walk assist When you are on or off the bicycle and start moving it, you can use walk assist without pedaling the bicycle.To use walk assist, press and hold the walk assist switch. Walk assist will not work in the following situations: When you release the walk assist switch.If you press another swit...

Power supply to external devices Power can be supplied to most external devices (e.g. vari-ous smart phones etc.) by connecting a commercial USB2.0 OTG cable. [To supply power]1. Open the USB port cap of the display.2. Connect the USB cable to the display and external de- vice. 3. Turn on the power ...

Display Unit (Display C) The Display Unit offers the following operations and infor-mation displays. NOTICE This device complies with part 15 of the FCC Rules and contains licence-exempt transmitter/receiver that comply with Innovation, Science and Economic De- -exempt RSS-247 standard . Opera-tions...

Déclaration à la radiation: Cet équipement respecte les limites r a y o n n e m e n t s I C R S S - 1 0 2 d é f i n i e s p o u r un environnement non contrôlé. Cet équipement doit être installé et mis en marche à une distance minimale de0.2 in (0.5 cm) qui sépare rayonnant de votre corps. Clamp Cla...

Speedometer Speedometer The speedometer displays your bicycle speed (in kilome-ter per hour or mile per hour). To select the km/mile, see TIP If your bicycle speed is less than 2.0 km/h or 1.2 MPH, the Battery capacity indicator The battery capacity indicator displays an estimate of how much capacit...

Clock Adjust You can adjust the time of the clock. 1. Check that the is flashing and adjust the hour by using the assist mode switches (up) or (down). 2. Press the function select switch to adjust the minutes.3. - utes by using the assist mode switches (up) or (down). 4. Press the function select sw...

Distance Unit You can select the unit for distance and speed. - cated in kilometers and the speed in km/h. - cated in miles and the speed in mph. 1. Select or by using the assist mode switches (up) or (down). 2. When you press the function select switch, the setting will then be kept and the display...

Record Reset (Average bicycle speed), (Max- TIP You cannot reset the odometer.To reset the accumulated energy that is displayed on the device connected via the Bluetooth low energy - play. Then, - lated energy. 1. Select an item by using the assist mode switches (up) or (down) and use the function s...

Bluetooth (Bluetooth low energy technology) You can set the profile to use the wireless communication function with Bluetooth low energy technology, or you can select not to use the wireless communication function. - tion will be inactive. - dence Profile will be available. available. selected, the ...

USB You can use the USB port as a power supply. TIP Normally you should not use because this is a service mode used for wired communication.When the power is turned off, the mode automatically changes to returns to the main riding display. 56 [ ] [S] [S] [ ] [ ] [ ]

Selection of or [ ] [S] [ ] [ ] [ ] Selection of or [ ] [S] [ ] [ ] The options that are displayed in the display vary depending on the specifications of the smartphone. [ ] [S] Layout You can select the display layout when you are using an application that uses the YEP1.0 profiles. This, however, v...

61 Communication with Bluetooth low energy technology The wireless communication device corresponding to the CSCP, CPP, or YEP1.0 profiles can provide the communi-cation via Bluetooth low energy technology. Ready for pairing Paired Bluetooth indicator 1. Set the profiles of the Display Unit by refer...

ation pass tor North Direction of and distance to the next turn Information transmitted from the application Turn-by-turn Turn-by-turn The direction of and distance to the next turn are dis-played on the traveling route.The lower part displays related information (street names, place names, etc.) se...

Workout distance/time Workout distance/time The upper part displays the target distance traveled value together with the accumulated distance traveled over time since the application started the Fitness function. In addition, the current distance traveled is displayed by a bar graph.The lower part d...

Display Unit (Interface X) The Display Unit offers the following operations and infor-mation displays. NOTICE This device complies with part 15 of the FCC Rules and contains licence-exempt transmitter/receiver that comply with Innovation, Science and Economic De- -exempt RSSs. Opera- tions is subjec...

NOTICE Federal Communication Commission Interfer-ence Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-ference in a residen...

Déclaration à la radiation: Cet équipement respecte les limites r a y o n n e m e n t s I C R S S - 1 0 2 d é f i n i e s p o u r un environnement non contrôlé. Cet équipement doit être installé et mis en marche à une distance minimale de0.2 in (0.5 cm) qui sépare rayonnant de votre corps. G Power o...

Battery capacity indicator Battery capacity indicator The battery capacity indicator displays an estimate of how much capacity is left in the Battery Pack. Headlight on/off For models equipped with a headlight or taillight powered by the Battery Pack, each time you press the light switch, the headli...

Brightness You can set the indicator brightness when the headlight is on and off. [S] Press the select button [Setting the indicator brightness when the headlight is on]1. Turn the headlight on by using the light switch.2. Select the indicator brightness by using the assist mode switches (up) or (do...

Assist mode indicator Pu Depends on the assist mode at that time. Pu Purple Walk assist When you are on or off the bicycle and start moving it, you can use walk assist without pedaling the bicycle.Walk assist will not work in the following situations: When you release the assist mode switch (down).I...

Self-diagnosis function The e-Bike Systems are equipped with a self-diagnosis function. If a malfunction or fault occurs in the e-Bike Sys-tems, the assist mode indicator will flash in red. See abnormal displays and abnormal flashing. Red No light If the problem cannot be solved, have your bicycle i...

TIP Power is supplied automatically when an external de-vice is connected with the USB cable.No power is supplied if the remaining capacity of the Battery Pack is low.The power supply of the vehicle will go off and power supplied by the USB connection will also stop if the ve-hicle is not operated f...

Communication with ANT+ The wireless communication device corresponding to the Speed and cadence, Power, and LEV profiles can provide the communication via ANT+.1. - 2. Execute pairing with your ANT+ display without other ANT+ device nearby. TIP Keep the distance between the communication unitand wi...

H. Battery Pack and charging procedure Charging plug Power plug Battery capacity indicator Charging connector Battery charger lamp Charger display Battery capacity indicator lamp Battery capacity indicator button The Battery Pack equipped for the Yamaha e-Bike Sys-tems is a lithium-ion battery. The ...

Appropriate charging environments For safe and efficient charging, charge the Battery Pack in a location that is: Flat and stableFree of rain or moistureOut of direct sunlightWell-ventilated and dryNot accessible to children or petsTemperature between 59 77 °F (15 25 °C) Inappropriate charging envir...

Cap Charging connector Charging the Battery Pack removed from the bicycle 1. Turn the Display Unit off.2. Insert the key into the battery lock, and turn it to re- lease the battery lock. 3. Remove the Battery Pack. Use both hands when removing the Battery Pack. Do not drop the Battery Pack or subjec...

86 Top of the case Battery bottom TIP Battery Pack mounting method (Down Tube Battery) Insert the Battery Pack in the direction of the arrow so that the battery bottom is aligned to the top of the case.Insert the upper part of the Battery Pack in the direction of the arrow so that the battery handle...

Reading the charging status for Battery Pack 89 Battery charger lamp Battery capacity indicator lamps Current status Details On Lit battery capacity indicator lamps indicate the amount of charging completed. A flashing battery capacity indicator lamp indicates current progress. (Down Tube Battery) (...

TIP For example, even if normal charging is started, if the Battery Pack temperature or the surrounding temperature is too high or too low, the charging may be extended or charging may be stopped without the Battery Pack being charged sufficiently in order to protect the Battery Pack. Charging start...

I. Checking the residual battery capacity You can check the estimate of how much capacity is left in the Battery Pack and to what extent it is - cator TIP bicycle.If you are using an old Battery Pack, the residual battery capacity indicator may suddenly dis-play very little power when you start movi...

Display of the battery capacity indicator lamps and the estimate of theresidual battery capacity When checking the residual battery capacity, push the battery capacity indicator button 98 Display of the battery capacity indicator lamps Estimate of the residual battery capacity Applicable situation (...

100 Display of the battery capacity indicator lamps Estimate of the residual battery capacity Applicable situation (Down Tube Battery) (Multi Location Battery) (External Crossover Battery) Slow flashing <0.5 second intervals> 10 1 % There is very little battery capacity left. (Down Tube Batter...

J. Pre-operation check Be sure to perform the inspection before riding the bicycle.If there is anything you do not understand or find difficult, please consult a bicycle dealer. NOTICE If you confirm there is a fault, have your bicycle inspected at a dealer as soon as possi-ble.The power assist mech...

Maintenance for the Drive Unit NOTICE Because a Drive Unit is a precision machinery, do not disassemble or exert any strongforce on it (for example, do NOT hit this product with a hammer).Especially since the crank axle is directly connected to the inside of the Drive Unit, anylarge damages inflicte...

M. Disposal The Drive Unit, Battery Pack, Battery Charger, Display Unit, Speed Sensor Set, accessories andpackaging should be sorted for environmental-friendly recycling.Do not dispose of the bicycle or its components as household waste. Do not dispose of the Battery Pack in a fire or expose it to a...

Walk assist function 112 Symptom Check Action The walk assist function turns off. Is the tire locked for a few seconds? (Display A2, Display B, and Display C) Release your finger from the walk assist switch for a moment, and after making sure that the tires turn, push the switch again. (Interface X)...

Power supply of external devices via USB connection * Applies to Display B, Display C, and Interface X. 113 Symptom Check Action Power is not supplied. Is the Display on? Press the power switch on the Display Unit to turn the power on. Is the USB version correct? Use an external device that complies...

Wireless communication * Applies to Display C and Interface X. 114 Symptom Check Action Wireless communication cannot be used. Are both the wireless communication settings of the Display Unit and your wireless communication device turned on? Set the communication profiles by referring to and then se...

Battery Pack and Battery Charger 115 Symptom Check Action Cannot charge Is the power plug firmly connected? Is the charging plug firmly inserted in the Battery Pack? Reconnect and try charging again. If the Battery Pack still does not charge, the Battery Charger might be malfunctioning. Are the resi...

O. Specifications Drive Unit 119 PWseries CE Range of assist speed 0 to less than 20 mph (32 km/h) Motor type Permanent Magnet Synchronous Motor Maximum 30 minutes power 480 W Assist power control method Control method depends on pedaling torque and bicycle speed PWseries C2 Range of assist speed 0 ...

Display Unit Display A2 Power supply portion Wireless communication portion Display B Power supply portion USB port type USB2.0 Micro-B Output current Max. 1000 mA Rated voltage 5 V Wireless communication portion Product Information Model No. X3M Manufacturer YAMAHA MOTOR CO., LTD. 2500 Shingai, iwa...