Wolf W302210I - Manuals

Wolf W302210I – Manual in PDF format online.

Manuals:

Manual

Manual Wolf W302210I

Summary

Page 3 - I N S TA L L AT I O N; R E Q U I R E M E N T S; Model Number; W O L F; P R O W A L L V E N T I L AT I O N; H O O D S; Low-Profile Wall Hood; L I S T O F M A T E R I A L S

3 I N S TA L L AT I O N R E Q U I R E M E N T S IMPORTANT NOTE: This installation must be completed by a qualified installer or Wolfauthorized service center technician. Installer: Please read the entire Installation Instructions prior to installation. Save theseinstructions for the local inspector’...

Page 4 - C O N S I D E R A T I O N S

4 W O L F P R O W A L L V E N T I L AT I O N H O O D S IMPORTANT NOTE: Wolf recommends that the Pro wall ventilation hood be installed30" (762) to 36" (914) above the countertop. Rail option (R) wall hoods come with a classicstainless steel decorative rail and stand-offs.Optional platinum or...

Page 5 - I N S T R U C T I O N S; O V E R A L L; D I M E N S I O N S; ( 6 1 0 ) D E E P W A L L H O O D S; Dimensions may vary to ±; ( 6 8 6 ) D E E P W A L L H O O D S; Dimensions may vary to ±; Low Profile Wall Hood

5 Dimensions in parentheses are inmillimeters unless otherwise specified. I N S TA L L AT I O N I N S T R U C T I O N S 10" (254) OVERALL HEIGHT OVERALL WIDTH 4" (102) 22" (559) OVERALL DEPTH 12" (305) 2" (51) 3 / 4 " (19) DIAMETER OF RAIL OVERALL WIDTH 4" (102) 24" (...

Page 6 - S P E C I F I C A T I O N S

6 W O L F P R O W A L L V E N T I L AT I O N H O O D S 30" TO 36" (762 – 914) TO COUNTERTOP 30" TO 36" (762 – 914) TO COUNTERTOP 10" (254) 18" (457) HEIGHT OF HOOD 22" (559) 24" (610) DEPTH OF HOOD WIDTH OF HOOD NOTE: Low-profile and 24" (610) deep wall hoods have...

Page 7 - Low-Profile Wall Hoods; Letters correspond to those in the illustration.

7 Dimensions in parentheses are inmillimeters unless otherwise specified. I N S TA L L AT I O N I N S T R U C T I O N S I N S TA L L AT I O N S P E C I F I C A T I O N S The following chart provides dimensionsspecific to each wall hood model. Thesedimensions are critical for proper installation.Also...

Page 8 - Ducting options for low-profile wall hoods

8 L O W- P R O F I L E A N D 2 4 " ( 6 1 0 ) H O O D S S T E P 1 : I N S T A L L D U C T W O R K IMPORTANT NOTE: Wolf recommends that the Pro wall ventilation hood be installed30" (762) to 36" (914) above the countertop. IMPORTANT NOTE: Consult a qualified HVAC Engineer for specific duct...

Page 10 - Mounting holes for low-profile hoods; S T E P 3 : H O O D P R E P A R A T I O N

10 W O L F P R O W A L L V E N T I L AT I O N H O O D S A C C E S S O R I E S Optional acces-sories are availablethrough yourWolf dealer. Toobtain local dealerinformation, visitthe Locator sectionof our website,wolfappliance.com. L O W- P R O F I L E A N D 2 4 " ( 6 1 0 ) H O O D S S T E P 2 : W...

Page 11 - Do not discard the screws; Do not run wiring for the

11 Dimensions in parentheses are inmillimeters unless otherwise specified. I N S TA L L AT I O N I N S T R U C T I O N S 17 " (432) 8" (203) Wall Cut-Out Area Hood Centerline 4 1/2 " (114) 4 11/16 " (119) 4 " (102) Transition Centerline Wall cut-out for low-profile hoods – horizo...

Page 12 - Hood installation; A N D

12 W O L F P R O W A L L V E N T I L AT I O N H O O D S Rough-In Plate Mounting Holes Soffit Hood installation L O W- P R O F I L E A N D 2 4 " ( 6 1 0 ) H O O D S S T E P 5 : I N S T A L L T H E H O O D IMPORTANT NOTE: If a backsplash is to be used, it should be installed before the wallhood is...

Page 14 - Do not; discard the screws, they will be; Rough-in plate installation; A C C E S S O R I E S

The hood assembly is shipped with therough-in plate / transition attached. Thetransition is shipped upside down in the topof the hood. It must be removed and rein-stalled in the proper position. Remove the filters by pushing each filter upat the angle it is placed in, and rotate down.Remove the cent...

Page 15 - W A L L H O O D S

15 Dimensions in parentheses are inmillimeters unless otherwise specified. I N S TA L L AT I O N I N S T R U C T I O N S Rough-In Plate Soffit Mounting Holes Hood installation 2 7 " ( 6 8 6 ) D E E P W A L L H O O D S If you are installing WBLOWER-90INT orWBLOWER-120INT, refer to the internalblo...

Page 16 - P R O W A L L; V E N T I L A T I O N H O O D S; Low-profile hoods wiring location

Remove the electrical box cover from therough-in plate. Connect black wire to powersupply black wire, white wire to powersupply white wire and green wire to greenwire or bare wire. Place all wiring connections inside the elec-trical box and reinstall on the rough-in platein the upper right-hand corn...

Page 17 - I N T E R N A L; B L O W E R S; Internal blower installation

17 Dimensions in parentheses are inmillimeters unless otherwise specified. I N S TA L L AT I O N I N S T R U C T I O N S I N T E R N A L B L O W E R S IMPORTANT NOTE: Refer to the specific installation instructions provided with eachinternal blower for additional mounting andwiring instructions. IMP...

Page 18 - R E M O T E; Dimensions for BLOWER-60IL

18 W O L F P R O W A L L V E N T I L AT I O N H O O D S A C C E S S O R I E S Optional acces-sories are availablethrough yourWolf dealer. Toobtain local dealerinformation, visitthe Locator sectionof our website,wolfappliance.com. 11 3 / 4 " (298) 21 1 / 2 " (546) 24 3 / 8 " (619) 18 1 / ...

Page 19 - all; green and bare wires together; Dimensions for BLOWER-90REM; Dimensions for BLOWER-150REM

19 Dimensions in parentheses are inmillimeters unless otherwise specified. I N S TA L L AT I O N I N S T R U C T I O N S I N - L I N E A N D R E M O T E B L O W E R S B L O W E R W I R I N G IMPORTANT NOTE: Refer to the specific installation instructions provided with eachblower for additional wirin...

Page 20 - B L O W E R; A S S E M B L I E S

20 W O L F P R O W A L L V E N T I L AT I O N H O O D S R E M O T E B L O W E R S BLOWER-60REM (801640) – 600 CFM remote blower for low-profile wall hoods(except Models W302210I and W362210I),and Models W302418 and W302718. BLOWER-90REM (801641) – 900 CFM remote blower for low-profile wall hoods(exc...

Page 21 - F I LT E R S / G R E A S E C U P S; I N S T A L L A T I O N; Duct cover installation; If a duct cover is to be; Filter and grease cup installation

21 Dimensions in parentheses are inmillimeters unless otherwise specified. I N S TA L L AT I O N I N S T R U C T I O N S A C C E S S O R I E S Optional acces-sories are availablethrough yourWolf dealer. Toobtain local dealerinformation, visitthe Locator sectionof our website,wolfappliance.com. I N S...

Page 22 - T R O U B L E; S H O O T I N G; S E R V I C E; N A M E P L AT E

22 C O N T A C TI N F O R M A T I O N Wolf CustomerService:800-332-9513 Website:wolfappliance.com T R O U B L E S H O O T I N G IMPORTANT NOTE: If the Pro wall ventilation hood does not operate properly, follow thesetroubleshooting steps: Verify that power is being supplied to theventilation hood. C...

Page 23 - LEFT OUTER EDGE OF HOOD

23 CUT -OUT FOR LOGO PLA CEMENT BO TT OM EDGE OF HOOD FOLD LINE FOR LOGO PLA CEMENT LEFT OUTER EDGE OF HOOD