Williams Sound WIR 239 - Manuals

Page 3 - TV Infrared System is not recom-; YSTEM; Please read through this manual carefully

S YSTEM O VERVIEW Thank you for purchasing the SoundPlus ™ TV Infrared System from Williams Sound Corp. Anyone needing auditory assis-tance to overcome background noise, reverberation, or distancefrom the sound source can benefit from the SoundPlus ™ TV Infrared System. You can use the SoundPlus ™ T...

Page 4 - To protect your hearing and the hearing of others; Make sure the volume is turned down before putting on the; or other unauthorized persons; to

® 4 S AFETY I NFORMATION Hearing Safety: CAUTION! This product is designed to amplify sounds to a high volumelevel which could potentially cause hearing damage if usedimproperly. To protect your hearing and the hearing of others : 1. Make sure the volume is turned down before putting on the earphone...

Page 5 - Product Recycling for Customers in the European Union:

® 5 Pacemaker Safety: CAUTION! 1. Before using this product with a pacemaker or other medical device, consult your physician or the manufacturer of yourpacemaker or other medical device. 2. If you have a pacemaker or other medical device, make sure that you are using this product in accordance with ...

Page 6 - TV I

® 6 S ETTING UP THE TX238 T RANSMITTER NOTICE: T HE RECHARGEABLE BATTERIES ARE SHIPPED IN A DIS - CHARGED STATE . T HE BATTERIES MUST BE CHARGED OVERNIGHT BEFORE USING THE S OUND P LUS ™ TV I NFRARED S YSTEM . The WIR TX238 Transmitter may be placed on top of a TV orshelf. Place the TX238 Transmitte...

Page 7 - Plug the Power Supply cord into the “DC 12V” jack

® 7 TV Microphone If an RCA connection is unavail-able, use the provided TV micro-phone to pickup the sound sourcedirectly from the TV loud speak-er as shown on right. TX238 TX238 Transmitter (Rear View) S TEP 1: C ONNECT THE T RANSMITTER P OWER S UPPLY Plug the Power Supply cord into the “DC 12V” j...

Page 8 - Choose; mportant: If your system is packaged with the WIR RX239; stereo; FIXED; output should be

(HIGHEST AUDIO QUALITY) Connect the RCA plugs from the TV or VCRaudio output into the LEFT and RIGHT RCAjacks on the TX238 Transmitter 3 . Next, slide the stereo/mono switch 2 on the TX238 Transmitter to the stereo “ ” position. Your transmitter is now set for stereo operation. ® 8 S TEP 3: S ELECT ...

Page 9 - If an RCA connection is unavailable; TV MICROPHONE

® 9 S TEP 3 ( CONTINUED ): If an RCA connection is unavailable , use the provided TV MICROPHONE 5 to pickup the desired sound source. Plug in the microphone into the Mic Jack on the rear of theTX238 Transmitter 4 . Use the velcro strip supplied to attach the microphone near the loudspeaker 4 of your...

Page 10 - First, place the lanyard on the receiver around your neck.

® 10 S ETTING UP THE RX237 R ECEIVER S TEP 1: I NSTALL THE R ECEIVER B ATTERIES Insert the rechargeable battery into the bottom of the RX237 Receiver(see page 12). Place the receiver into the charger cradle built into thetop of the TX238 Transmitter and let charge overnight. The spare bat-tery can b...

Page 11 - Return the receiver to the charger when it is not in use!; Use a small screwdriver to adjust the loudness bal-

® 11 IMPORTANT: When you are done using the RX237, rememberto UNPLUG the earphone, headphone, or neckloop from the receiver’s jack. The receiver will not turn off until the earphone/headphone is removed from the unit. Return the receiver to the charger when it is not in use! A DDITIONAL R ECEIVER A ...

Page 13 - Return the receiver to the charger when it is not in use.

® 13 S ETTING UP THE RX238 R ECEIVER S TEP 1: I NSTALL THE R ECEIVER B ATTERIES Insert the rechargeable battery into the bottom of the RX238Receiver (see page 14). Place the receiver into the charger cradlebuilt into the top of the TX238 Transmitter and let chargeovernight. The spare battery can be ...

Page 15 - mono; ) First, place the neckloop on the receiver around your neck.

® 15 S ETTING UP THE RX239 (N ECKLOOP ) R ECEIVER S TEP 1: I NSTALL THE R ECEIVER B ATTERIES Insert the Rechargeable battery into the bottom of the RX239Receiver (see drawing on page 16). Place the receiver into thecharger cradle built into the top of the TX238 Transmitter and letcharge overnight. T...

Page 18 - TV

® 18 L IMITED W ARRANTY Williams Sound products are engineered, designed and manufacturedunder carefully controlled conditions to provide you with many yearsof reliable service. Williams Sound warrants the SoundPlus ™ TV Infrared System against defects in materials and workmanship forFIVE (5) years....

Page 19 - Pack the system carefully and send it to:

® 19 If you experience difficulty with your system, call Toll-Free forCustomer Assistance: 1-800-843-3544 If it is necessary to return the system for service, your CustomerService Representative will give you a Return Authorization Number(RA) and shipping instructions. Pack the system carefully and ...

Page 20 - WIR TX238 Transmitter:; Subcarrier Frequency:

® 20 WIR 238, WIR 239 S YSTEM S PECIFICATIONS : WIR TX238 Transmitter: Size, Weight, Color: 6.25”L x 3.25”W x 1.25”H (15.9cm x 8.3cm x 3.2cm), 5.1oz. (140g), Gray Power Input: 12 VDC (center is positive), 200 mA ClassII wall transformer TFP 024 Power Supply: North America:120VAC, 60Hz, UL/CSA TFP 03...