Page 2 - CONTENTS; WELCOME 3
CONTENTS WELCOME 3 Introduction ..................................................................................................... 3Specifications ................................................................................................... 3 SAFETY 4 General Safety Rules .....................
Page 3 - safety for both yourself and others.
SPECIFICATIONS INTRODUCTION Thanks for purchasing the WEN Hammer Drill. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to...
Page 4 - GENERAL SAFETY RULES; WORK AREA SAFETY
GENERAL SAFETY RULES WORK AREA SAFETY 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmo- spheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ig- nite the dust or fumes....
Page 5 - POWER TOOL USE AND CARE
GENERAL SAFETY RULES 7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. POWER TOOL USE AND CARE 1. Do not force the power tool. Use the correct power tool fo...
Page 6 - HAMMER DRILL SAFETY; Hold power tool by insulated gripping surfaces,; HAMMER DRILL SAFETY WARNINGS
HAMMER DRILL SAFETY 1.Work Environment. Do not operate the tool in wet or damp conditions; doing so significantly increases the risk of electrical shock. Do not operate the tool in the presence of flammable liquids or gases. 2. Personal Safety . Always wear ANSI Z87.1-approved glasses, hearing prote...
Page 7 - GUIDELINES AND RECOMMENDATIONS FOR EXTENSION CORDS; Use a separate electrical circuit for your tool.
ELECTRICAL INFORMATION (CHARGER) AMPERAGE REQUIRED GAUGE FOR EXTENSION CORDS 25 ft. 50 ft. 100 ft. 150 ft. 2A 18 gauge 16 gauge 16 gauge 14 gauge IMPORTANT: Servicing a double-insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel ...
Page 8 - BATTERY & CHARGER SAFETY WARNINGS
• Avoid dangerous environments – Do not charge the battery pack in rain, snow or in damp or wet locations. Do not use the battery pack or charger in the presence of explosive atmospheres (gaseous fumes, dust or flam- mable materials) because sparks may be generated when inserting or removing the bat...
Page 9 - ABOUT THE BATTERY
BATTERY & CHARGER SAFETY WARNINGS ABOUT THE BATTERY 1. The battery pack has to be charged completely before you use the tool for the first time.2. For optimum battery performance, avoid low discharge cycles by charging the battery pack frequently.3. Lithium-ion batteries are subject to a natural...
Page 10 - UNPACKING & PACKING LIST; UNPACKING; Hammer Drill
Accessories Components UNPACKING & PACKING LIST UNPACKING Carefully remove the hammer drill from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to mak...
Page 11 - KNOW YOUR HAMMER DRILL; TOOL PURPOSE
KNOW YOUR HAMMER DRILL TOOL PURPOSE From driving fasteners to drilling holes in wood, metal, masonry, and more, your WEN Hammer Drill has your back. Refer. Refer to the following diagrams to become familiarized with all the parts and controls of your hammer drill. The components will be referred to ...
Page 12 - OPERATION; POWER TRIGGER ACTION; ELECTRIC BRAKE; Reverse
1 OPERATION POWER TRIGGER ACTION 1. Turn the drill on by pressing the power trigger (Fig. 1 - 1). The trigger is pressure sensitive, meaning that pushing the trigger down farther pro- duces a higher torque and speed in comparison to pushing it lightly.2. Use the direction of rotation switch (Fig. 2A...
Page 13 - CHUCK; GENERAL SCREWDRIVING; GENERAL DRILLING
OPERATION CHUCK Your drill is equipped with a single sleeve keyless chuck (Fig. 5 - 1), so you can quickly change bits with no extra tools required. To install bits, place the direction of rotation switch in the OFF position and unplug the battery from the tool. Rotate the chuck’s body counterclockw...
Page 14 - MAINTENANCE; ROUTINE INSPECTION; PRODUCT DISPOSAL
MAINTENANCE ROUTINE INSPECTION 1. Before each use, inspect the general condition of the tool. Check for: • Loose hardware, • Misalignment or binding of moving parts, • Damaged cord/electrical wiring, • Cracked or broken parts, and • Any other condition that may affect its safe operation.2. After eve...
Page 15 - EXPLODED VIEW & PARTS LIST
EXPLODED VIEW & PARTS LIST NOTE: Not all parts may be available for purchase. Parts and accessories that wear down over the course of normal use are not covered under the warranty. 15
Page 16 - Description
EXPLODED VIEW & PARTS LIST No. Part No. Description Qty. 1 Right Battery Housing 1 2 20202 Battery 1 3 20200C Charger 1 4 Battery Terminal 1 5 Hex Nut, M4 2 6 Directional Adjustment Switch 1 7 Right Housing 1 8 Screw, ST3x13 8 9 Label 2 10 Chuck Screw, M5x20 (LH) 1 11 Chuck 1 12 Gearbox Assembly...
Page 17 - WARRANTY STATEMENT; LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser on...
Page 18 - NOTES
