VXI B100 - Manuals - manualsarea.com

Page 3 - TABLE OF CONTENTS; Basic Operations

Blue Parrott B100 Wireless Headset 2 TABLE OF CONTENTS Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Basic Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Product Feat...

Page 4 - VXI LIMITED WARRANTY; VXI consumer products (one year warranty); BOX CONTENTS; BASE

VXI LIMITED WARRANTY VXI consumer products (one year warranty) 1. VXI warrants that your Blue Parrott B100 system will be free from defects in material and workmanship for oneyear from the date of purchase. If, during the first yearfrom the date of purchase, your Blue Parrott B100 systemfails to wor...

Page 5 - BASIC SAFETY INSTRUCTIONS; • Do not immerse the Blue Parrott B100 in water.

company may request that you disconnect the equipment until theproblem is resolved. 9. Repair of this product must be handled by VXI Corporation. For more information about repairs, please read the warranty section of thisuser guide or call VXI Corporation at 1-800-742-8588. 10. Connection to party ...

Page 6 - PRODUCT FEATURES; Blue Parrott B100 Headset; Multifunction Button

Blue Parrott B100 Wireless Headset PRODUCT FEATURES Blue Parrott B100 Headset 5 Multifunction Button Indicator Lights Volume (Increase) / Microphone Mute Control Volume (Decrease) Control Noise Canceling Microphone Adjustable Headband T-Bar Blue Parrott B100 Wireless Headset USA FCC Part 15 FCC Noti...

Page 7 - FAQ’S; Why don’t I hear a dial tone?; be flashing every few seconds when it is removed from the base.; How long do I have to charge the headset before I can use it?; Yes, you can utilize your phone’s features as you normally would.; Can I still use services offered by my telephone company?; Blue Parrott B100 Base

Blue Parrott B100 Wireless Headset FAQ’S Why don’t I hear a dial tone? 1. Make sure the headset is in Standby Mode. The yellow light on the headset should be flashing every few seconds when it is removed from the base. 2. Be sure the telephone line from the wall is connected to the Blue Parrott B100...

Page 8 - GLOSSARY OF TERMS; Standby Mode; – Headset is on and ready to get a dial tone, answer, or end a call.; OPERATION SUMMARY; Landline Phones; VISUAL AND AUDIO INDICATORS EXPLAINED; Headset Audio Indicators:

Blue Parrott B100 Wireless Headset GLOSSARY OF TERMS Standby Mode – Headset is on and ready to get a dial tone, answer, or end a call. Standby Mode is automatic when removing headset from the base. Turning off theheadset while it is out of the base takes it out of Standby Mode. Pair / Pairing – Pair...

Page 9 - Position the B100 headset and your phone no more than 3 feet apart.; MAXIMIZING RANGE

2. Follow the alternate headset’s user instructions for putting the headset into pairing mode. 3. Press and hold down the pairing button on the B100 base for approximately 5 to 15 seconds until the red and orange indicator lights on the base begin to flashalternately. Release the pairing button. 4. ...

Page 10 - INSTALLATION; Refer to label on base for connections.; STEP 1: Connect the Blue Parrott B100 to the telephone wall jack.; Before Pairing : Take the B100 Headset and Base Out of Standby Mode; Position the B100 base and B100 headset no more than 3 feet apart.

INSTALLATION The Blue Parrott B100 connects directly into the phone line wall jack. You may add atelephone directly to the B100 system, or you can install the B100 independently toits own telephone wall jack. However, if you install the Blue Parrott B100 base to a telephone wall jack separatefrom yo...

Page 11 - PAIRING; See page 5 and 6 for location of button controls.; STEP 3: Plug in the AC Adapter; • Thread all cords through the cord slot with the AC cord running; CHARGING THE HEADSET

the call (see Switch From Handset To Headset While On A Call on page 15). Orif desired, you may initiate three-way conferencing via the headset, asfollows:1. Be sure the headset is in Standby Mode. 2. Press the Multifunction button for 1 second, and release. After a brief pause, you will hear a dial...

Page 12 - Battery Information; Call Waiting; the button too long or you will disconnect the call.; Three-Way Conferencing

The headset’s audio and visual indicators will indicate the level of available batterypower as follows. When headset is in base: • Green light : Fully charged. • Red light : Normal charging/Okay to use. When headset is removed from base: • Flashing red light every few seconds : low battery warning. ...

Page 13 - HEADSET ADJUSTMENTS / MICROPHONE POSITIONING

End the Call Quickly press the multifunction button on the headset for 1 second. Afterwards, youwill hear a single beep. The call will be disconnected and the headset will revert toStandby Mode. Adjust Receive Volume To adjust the volume in your earpiece, press the increase or decrease volume button...

Page 14 - BASIC OPERATIONS

BASIC OPERATIONS See page 5 for location of button controls. Standby Mode The headset is automatically in standby mode when you remove it from the base;therefore, a single press of the multifunction button will obtain a dial tone, answeran incoming call, or end a call. After removing the headset fro...

Page 26 - User Guide

User Guide A brand of VXI CorporationOne Front Street. Rollinsford, NH 03869 800-742-8588 I 603-742-2888 Bringing freedom to personal communications www.blueparrott.com www.blueparrott.com PN201627B VXI_FullGuide_12.28.qxd 12/28/04 3:44 PM Page 1