Vulcan SG7800 - Manuals

– 5 – H SERIES SERVICE & PARTS LIGHTING AND SHUTTING DOWN PILOT BURNERS NOTE: All adjustment procedures associated with pilotlighting must be performed by an authorized Vulcan-Hartinstallation or service person. The bypass (minimumburner) flame adjustment must be made at the timethe appliance is...

– 7 – H SERIES SERVICE & PARTS PILOT BURNER ADJUSTMENTS NOTE: All pilot adjustments are to be performed onlyby certified Vulcan service representatives. OPEN TOP BURNER PILOT ADJUSTMENTS TOOLS: Standard screwdriver. After pilot is lit, turn the open top burner(s) ON. Adjust theflame if necessary...

– 8 – SERVICE & PARTS H SERIES TEMPERATURE CONTROL RECALIBRATION S T A N D A R D O V E N T E M P E R A T U R E C O N T R O LRECALIBRATION Field recalibration is seldom necessary and should notbe resorted to unless experience with cooking resultsdefinitely proves that the control is not maintaini...

– 9 – H SERIES SERVICE & PARTS AUTOMATIC SHUTOFF PILOT INSTRUCTIONS CLEANING To clean limiting orifice (Fig. 7), turn gas supply to unitOFF. Disconnect pilot tubing at the pilot burner body. Theorifice is then accessible at the body end of the pilotburner and can be removed for cleaning. Clean s...

– 10 – SERVICE & PARTS H SERIES REPLACEMENT PARTS LIST WARNING ALL SERVICE PERSONNEL W H E N S E R V I C I N G T H I S E Q U I P M E N T , U S E O N L YCERTIFIED CONTROLS DUPLICATING THOSE ORIGINALLYSUPPLIED ON THIS EQUIPMENT BY VULCAN-HARTCOMPANY.DO NOT SUBSTITUTE COMPONENTS WITH DIFFERENTMODEL...

– 19 – H SERIES SERVICE & PARTS REPLACEMENT PART PHOTOS H54