Vulcan ML-114950 - Manuals - manualsarea.com

Page 3 - TABLE OF CONTENTS

— 3 — TABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 4 - UNPACKING

— 4 — Installation, Operation and Care of ROUND GAS TILTING SKILLET MODEL VGTRS35 PLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL Your Vulcan-Hart Round Tilting Skillet is a versatile piece of equipment. It allows you to stew, simmer,pan fry, braise, grill, or saute, and all with a very uniform heat ...

Page 5 - INSTALLATION CODES AND STANDARDS; The Vulcan tilting skillet must be installed in accordance with:; In the United States of America:; The tilting skillet must be anchored to the floor.

— 5 — The skillet must be installed so that the flow of combustion and ventilation air will not be obstructed.Adequate clearance for air openings into the combustion chamber must be provided. Make sure thereis an adequate supply of air in the room to allow for that required for combustion of gas at ...

Page 7 - ELECTRICAL CONNECTIONS; ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE; SERVICE CONNECTIONS

— 7 — ELECTRICAL CONNECTIONS WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCALELECTRICAL CODES. WARNING: APPLIANCES EQUIPPED WITH A FLEXIBLE ELECTRIC SUPPLY CORD ARE PROVIDED WITH A THREE-PRONG GROUNDING PLUG. IT...

Page 8 - OPERATION; BEFORE FIRST USE

— 8 — OPERATION WARNING: THE TILTING SKILLET AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE TILTING SKILLET. CONTROLS (Fig. 1) Fig. 1 Thermostat — Maintains set temperature by controlling power supply. Power Switch — Turns power to the skillet ON and OFF. Temp. Light — (Re...

Page 9 - LIGHTING THE TILTING SKILLET; Ensure skillet is in the UPRIGHT position.; Shutdown; Do not tilt the skillet with the cover down.

— 9 — LIGHTING THE TILTING SKILLET 1. Open main gas valve. 2. Ensure skillet is in the UPRIGHT position. 3. Turn power switch ON. Set thermostat dial to desired setting. This will turn on the electronic ignition. The gas solenoid valve will open, supplying gas to the burner. The RED temperature ligh...

Page 10 - DISCONNECT ELECTRICAL POWER SUPPLY BEFORE CLEANING.; After Each Use

— 10 — The following are approximate temperature equivalents for the Thermostat dial settings: Approx. Temp. Setting (°F) (°C) 1 - 4 100 - 200 38 - 93 5 - 6 225 - 275 107 - 135 7 - 8 300 - 350 149 - 177 8 - 9 325 - 375 163 - 191 9 - 10 350 - 450 177 - 232 6. At the end of cooking, turn the Thermosta...

Page 11 - MAINTENANCE; THE TILTING SKILLET AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING,; LUBRICATION; Burner does not come on.; POSSIBLE CAUSES; TROUBLESHOOTING

— 11 — MAINTENANCE WARNING: THE TILTING SKILLET AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE TILTING SKILLET. WARNING: UNPLUG ELECTRICAL POWER SUPPLY. LUBRICATION Never grease or oil the pivot bearings as this may cause problems with tilting. Bearings are oilite andnever...

Page 12 - NOTES