Vulcan ES25 ML-52642 - Manuals

Page 2 - TABLE OF CONTENTS

– 2 – © VULCAN-HART COMPANY, 2003 TABLE OF CONTENTS GENERAL .............................................................................................................................................................. 3 INSTALLATION .....................................................................

Page 3 - UNPACKING; In the United States:

– 3 – Installation, Operation and Care of MODEL ES, EL & ET STEAM JACKETED KETTLES KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE GENERAL Your Vulcan steam jacketed kettle is produced with quality workmanship and material. Properinstallation, usage and maintenance will result in many years of sati...

Page 5 - OPERATION; BEFORE FIRST USE

– 5 – OPERATION WARNING: THE KETTLE AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE KETTLE. BEFORE FIRST USE Using a non-corrosive, grease-dissolving commercial cleaner, clean the protective metal oils from allsurface parts and interior of the kettle. Follow the cleaner ma...

Page 7 - CAUTION: Do not attempt to slide valve plug; Sight Glass Assembly

– 7 – 5. After washing, lubricate the valve body and valve plug with Petro-Gel lubricant. Make sure all interior mating surfaces are covered with this lubrication. This lubrication must be done every dayafter use. If the food draw-off valve plug and inside of valve body are not lubricated, undesirab...

Page 8 - MAINTENANCE; PERIODIC MAINTENANCE; Kettle Jacket Fluid

– 8 – MAINTENANCE WARNING: THE KETTLE AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE KETTLE. WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT. PERIODIC MAINTENANCE 1. Pressure Relief Valve...

Page 9 - SERVICE; GENERAL NOTES

– 9 – SERVICE WARNING: THE KETTLE AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE KETTLE. WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT. GENERAL NOTES The signal light marked "Power ...

Page 12 - PARTS LIST

– 12 – PARTS LIST NOTE: In ordering parts, always give model number, serial number, volts and phase of the kettle for which they are ordered. ITEM PART NUMBER NUMBER NUMBER DESCRIPTION REQUIRED 1 836799-1 1 1 / 2 " Faucet (Old Style) .................................................................

Page 14 - WIRING DIAGRAM

Page 18 - DIMENSIONS AND SERVICE CONNECTIONS

– 18 – DIMENSIONS AND SERVICE CONNECTIONS TOTAL CONNECTED AMPS SINGLE PH THREE PH 208V 240V 208V 240V 480V 12 576 50 33.3 28.9 14.4 18 86.6 75 50 43.3 21.7 24 115.4 100 66.7 57.8 28.9 36 N/A N/A 100 86.6 43.2 43.2 N/A N/A 119.9 104 52 DIMENSIONS – METRIC Liters Kilowatts Centimeters Model Capacity I...

Page 19 - NOTES