Vulcan 1048W ML-103840 - Manuals

Vulcan 1048W ML-103840 – Manual in PDF format online.

Manuals:

Manual Vulcan 1048W ML-103840

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9

Summary

Page 2 - COOLING FANS; PARTS REPLACEMENT

– 2 – HEATER (Fig. 1) 1. Push one end of the heater into one socket as far as it will go. 2. Swing the other end of heater up until it lines up with the opposite socket. 3. Release heater and it will snap into place. 4. Grasp the heater and move it back and forth to ensure that it is centered correc...

Page 3 - COMPONENT REPLACEMENT

– 3 – COMPONENT REPLACEMENT 1. Remove the access panel on the left side. 2. Remove all screws holding down the cover. 3. Lift cover straight up. Replacement of the voltage regulator, actuating switch, main terminal block, or the contactor (1048only) will require removing the component mounting plate...

Page 4 - COMPONENT LOCATION DRAWING; COMPONENT LOCATION (VIEW OF LEFT SIDE WITH COVER REMOVED)

– 4 – COMPONENT LOCATION DRAWING COMPONENT LOCATION (VIEW OF LEFT SIDE WITH COVER REMOVED) PL-53527 SOCKETS CONTACTOR (1048) PILOT LIGHT ACTUATING SWITCH COOLING FAN NYLON LOOP TERMINAL BLOCK GROUND STUD VOLTAGE REGULATOR SWITCH COMPONENT MOUNTING PLATE

Vulcan Manuals