Page 2 - Table of Contents
VIVOTEK 2 - User's Manual Table of Contents Overview 3 Read Before Use ..................................................................................................................................... 3Package Contents ................................................................................
Page 3 - Overview; Read Before Use; Power Adapter; Revision History
VIVOTEK User's Manual - 3 Overview Read Before Use The use of surveillance devices may be prohibited by law in your country. The Network Camera is not only a high-performance web-ready camera but can also be part of a flexible surveillance system. It is the user’s responsibility to ensure that the o...
Page 4 - Physical Description; General I/O Terminal Block; input / output devices. The pin definitions are described below.; MicroSD/SDHC Card Capacity
VIVOTEK 4 - User's Manual Physical Description General I/O Terminal Block This Network Camera provides a general I/O terminal block which is used to connect external input / output devices. The pin definitions are described below. MicroSD/SDHC Card Capacity This network camera is compliant with Micr...
Page 5 - Installation; Hardware Installation; First, follow the instructions below to remove the dome cover.; RoHS
VIVOTEK User's Manual - 5 Installation Hardware Installation First, follow the instructions below to remove the dome cover. Then remove the black cover as shown below. Dome Cover Tilt Adjustment Screw Record the MAC address before installing the camera. Network Camera Model No: FD8134 Made in Taiwan...
Page 6 - Hammer the supplied plastic anchors into the holes.; Ceiling Mount
VIVOTEK 6 - User's Manual With idiot-proof mechanism design and very compact size, this Network Camera is very easy for user to install in diverse indoor environment. 1. Attach the alignment sticker to the ceiling/wall. 2. Through the two circles on the sticker, drill two pilot holes into the ceilin...
Page 7 - Network Deployment; Setting up the Network Camera over the Internet; Connect the power cable from the Network Camera to a power outlet.; Internet connection via a router; Ethernet Switch
VIVOTEK User's Manual - 7 Network Deployment Setting up the Network Camera over the Internet This section explains how to configure the Network Camera to an Internet connection . 1. If you have external devices such as sensors and alarms, make the connection from the general I/O terminal block. 2. U...
Page 8 - ■ HTTP port; Internet connection with static IP; Please refer to LAN on page 33 for details.
VIVOTEK 8 - User's Manual IP address : 192.168.0.2Subnet mask : 255.255.255.0Default router : 192.168.0.1 LAN (Local Area Network)Router IP address : 192.168.0.1 WAN (Wide Area Network )Router IP address : from ISP Cable or DSL Modem POWER COLLISION LINK RECEIVE PARTITION 1 2 3 4 5 Internet IP addre...
Page 9 - When using a PoE-enabled switch; switch via Ethernet cable.; When using a non-PoE switch; between the Network Camera and a non-PoE switch.; power + data transmission
VIVOTEK User's Manual - 9 Set up the Network Camera through Power over Ethernet (PoE) (FD8134 only) When using a PoE-enabled switch The Network Camera is PoE-compliant, allowing transmission of power and data via a single Ethernet cable. Follow the below illustration to connect the Network Camera to...
Page 10 - Software Installation; your Network Camera on the LAN.; Next; to continue the program.
VIVOTEK 10 - User's Manual Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN. 1. Install IW2 under the Software Utility directory from the software CD. Double click the IW2 shortcut on your desktop to ...
Page 11 - Ready to Use; Turn the lens to adjust the image orientation.; Loosen
VIVOTEK User's Manual - 11 Ready to Use 1. Access the Network Camera on the LAN.2. Retrieve live video through a web browser or recording software. Adjusting the Lens Based on the live image retrieved from the camera, adjust the camera lens to the desired viewing angle: 1. Turn the lens module left ...
Page 12 - either ceiling or wall mount.; Completion; a crisp sound when the dome cover is assembled successfully.; -axis Mechanism Design; Tilt Adjustment Screw
VIVOTEK 12 - User's Manual The sophisticated 3-axis mechanism design offers very flexible, easy hardware installation for either ceiling or wall mount. Completion 1. Align the inner side of the black cover with the notch on both sides of the lens, fix the black cover. 2. If you choose to the feed th...
Page 13 - Accessing the Network Camera; GPP-compatible mobile devices, and VIVOTEK recording software.; Using Web Browsers; Enter; The live video will be displayed in your web browser.; NOTE
VIVOTEK User's Manual - 13 Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software. Using Web Browsers Use Installation Wizard 2 (IW2) to access to the Network Cameras on th...
Page 14 - it is highly recommended to set a password for the Network Camera.; OK; Refresh your web browser, then install the Active X
VIVOTEK 14 - User's Manual ► By default, the Network Camera is not password-protected. To prevent unauthorized access, it is highly recommended to set a password for the Network Camera. For more information about how to enable password protection, please refer to Security on page 26. ► If you see a ...
Page 15 - Using RTSP Players; players that support RTSP streaming.
VIVOTEK User's Manual - 15 Using RTSP Players To view the MPEG-4 streaming media using RTSP players, you can use one of the following players that support RTSP streaming. Quick Time Player Real Player VLC media player mpegable Player pvPlayer As most ISPs and players only allow RTSP streaming throug...
Page 16 - Using 3GPP-compatible Mobile Devices; sure the authentication mode of RTSP streaming is set to disable.; Type the following URL commands into the player.
VIVOTEK 16 - User's Manual Using 3GPP-compatible Mobile Devices To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed over the Internet. For more information on how to set up the Network Camera over the Internet, please refer to Setup the Ne...
Page 17 - Using VIVOTEK Recording Software; download it from
VIVOTEK User's Manual - 17 Using VIVOTEK Recording Software The product software CD also contains recording software, allowing simultaneous monitoring and video recording for multiple Network Cameras. Please install the recording software; then launch the program to add the Network Camera to the Cha...
Page 18 - Main Page; Host Name; please refer to Configuration on page 23
VIVOTEK 18 - User's Manual Main Page This chapter explains the layout of the main page. It is composed of the following sections: VIVOTEK INC. Logo, Host Name, Camera Control Area, Configuration Area, Menu, and Live Video Window. VIVOTEK INC. Logo Click this logo to visit the VIVOTEK website. Host N...
Page 19 - Live Video Window; : The transmission protocol and media options for H.264 /; Save Picture As; : Stop the transmission of the streaming media. Click the
VIVOTEK User's Manual - 19 Live Video Window ■ The following window is displayed when the video mode is set to H.264 / MPEG-4: Video Title : The video title can be configured. For more information, please refer to Video Settings on page 52. H.264 / MPEG-4 Protocol and Media Options : The transmissio...
Page 20 - : Display the current time. For more information, please refer to
VIVOTEK 20 - User's Manual Full Screen : Click this button to switch to full screen mode. Press the “Esc” key to switch back to normal mode. ■ The following window is displayed when the video mode is set to MJPEG: Video Title : The video title can be configured. For more information, please refer to...
Page 21 - Client Settings; Save; on the page bottom
VIVOTEK User's Manual - 21 Client Settings This chapter explains how to select the stream transmission mode and saving options on the local computer. When completed with the settings on this page, click Save on the page bottom to enable the settings. H.264 / MPEG-4 Protocol Options Depending on your...
Page 22 - MP4 Saving Options; Users can record live video as they are watching it by clicking; Local Streaming Buffer Time; If you enter 3000 Millisecond, the streaming will delay 3 seconds.
VIVOTEK 22 - User's Manual MP4 Saving Options Users can record live video as they are watching it by clicking Start MP4 Recording on the main page. Here, you can specify the storage destination and file name. Folder : Specify a storage destination for the recorded video files. File name prefix: Ente...
Page 23 - Click; Configuration; on the main page to enter the camera setting pages. Note that only; Basic Mode
VIVOTEK User's Manual - 23 Configuration Click Configuration on the main page to enter the camera setting pages. Note that only Administrators can access the configuration page. VIVOTEK offers an easy-to-use user interface that helps you set up your network camera with minimal effort. To simplify th...
Page 24 - Advanced Mode; functions, please click; at the bottom of; System; Host name
VIVOTEK 24 - User's Manual Advanced Mode Each function on the configuration list will be explained in the following sections. Those functions that are displayed only in Advanced Mode are marked with Advanced Mode . If you want to set up advanced functions, please click [Advanced Mode] on the bottom ...
Page 25 - System Time; : Select this option to synchronize the date and time of the Network; Digital Input
VIVOTEK User's Manual - 25 System Time Keep current date and time : Select this option to preserve the current date and time of the Network Camera. The Network Camera’s internal real-time clock maintains the date and time even when the power of the system is turned off. Synchronize with computer tim...
Page 26 - Security; Root Password; Type the password identically in both text boxes, then click; respective fields to access the Network Camera.; Manage Privilege; Add
VIVOTEK 26 - User's Manual Security This section explains how to enable password protection and create multiple accounts. Root Password The administrator account name is “root”, which is permanent and can not be deleted. If you want to add more accounts in the Manage User column, please apply the pa...
Page 27 - HTTPS (Hypertext Transfer Protocol over SSL); This section explains how to enable; Enable HTTPS; clicking the; Create and Install Certificate Method; Before using HTTPS for communication with the Network Camera, a; Certificate; must be created first.; Create self-signed certificate automatically; , then select a connection option: “HTTP; to generate a certificate.
VIVOTEK User's Manual - 27 HTTPS (Hypertext Transfer Protocol over SSL) Advanced Mode This section explains how to enable authentication and encrypted communication over SSL (Secure Socket Layer). It helps protect streaming data transmission over the Internet on higher security level. Enable HTTPS C...
Page 28 - click; Property; to view detailed information about the certificate.; Home; to return to the main page. Change the address from “; on your keyboard. Some Security Alert dialogs will pop up. Click; or; Yes; to
VIVOTEK 28 - User's Manual 4. The Certificate Information will automatically be displayed in the third column as shown below. You can click Property to view detailed information about the certificate. 5. Click Home to return to the main page. Change the address from “ http:// ” to “ https:// “ in th...
Page 29 - Create self-signed certificate manually; to generate the certificate.; Create certificate and install; to open the Create Certificate page, then click; to generate the certificate.
VIVOTEK User's Manual - 29 Create self-signed certificate manually 1. Select this option. 2. Click Create to open the Create Certificate page, then click Save to generate the certificate. 3. The Certificate Information will automatically be displayed in the third column as shown below. You can click...
Page 30 - If you see the following Information bar, click; and click on the Information bar at the top of the page
VIVOTEK 30 - User's Manual 3. If you see the following Information bar, click OK and click on the Information bar at the top of the page to allow pop-ups. 4. The pop-up window shows an example of a certificate request.
Page 31 - to search for the issued
VIVOTEK User's Manual - 31 5. Look for a trusted certificate authority that issues digital certificates. Enroll the Network Camera. Wait for the certificate authority to issue a SSL certificate; click Browse... to search for the issued certificate, then click Upload in the second column. NOTE ► How ...
Page 32 - SNMP (Simple Network Management Protocol); manage network devices and find, solve network problems with ease.; ■ The SNMP consists of the following three key components:; SNMP Configuration
VIVOTEK 32 - User's Manual SNMP (Simple Network Management Protocol) Advanced Mode This section explains how to use the SNMP on the network camera. The Simple Network Management Protocol is an application layer protocol that facilitates the exchange of management information between network devices....
Page 33 - Network; Network Type; LAN; when you complete the Network setting.
VIVOTEK User's Manual - 33 Network This section explains how to configure a wired network connection for the Network Camera. Network Type LAN Select this option when the Network Camera is deployed on a local area network (LAN) and is intended to be accessed by local computers. The default setting fo...
Page 34 - : Secondary domain name server that backups the Primary DNS.
VIVOTEK 34 - User's Manual Primary DNS : The primary domain name server that translates hostnames into IP addresses. Secondary DNS : Secondary domain name server that backups the Primary DNS. Primary WINS server : The primary WINS server that maintains the database of computer name and IP address. S...
Page 35 - Camera will select other ports for the Network Camera.; and click
VIVOTEK User's Manual - 35 NOTE ► If the default ports are already used by other devices connected to the same router, the Network Camera will select other ports for the Network Camera. ► If UPnP TM is not supported by your router, you will see the following message: Error: Router does not support U...
Page 36 - In the Networking Services dialog box, select; Universal Plug and Play; in the following window.; Finish; ► How does UPnP; UPnP; the Network Camera’s IP address.; Camera is reset to factory default, it will be accessible on the LAN.
VIVOTEK 36 - User's Manual 4. In the Networking Services dialog box, select Universal Plug and Play and click OK . 5. Click Next in the following window. 6. Click Finish . UPnP TM is enabled. ► How does UPnP TM work? UPnP TM networking technology provides automatic IP configuration and dynamic disco...
Page 37 - Enable IPv6; Select this option and click; to enable IPv6 settings.; Refers to Ethernet
VIVOTEK User's Manual - 37 Enable IPv6 Select this option and click Save to enable IPv6 settings. Please note that this only works if your network environment and hardware equipment support IPv6. The browser should be Microsoft ® Internet Explorer 6.5, Mozilla Firefox 3.0 or above. When IPv6 is enab...
Page 38 - Please follow the steps below to link to an IPv6 address:; on the keyboard or click; Refresh; button to refresh the webpage.; the following address format: (Please refer to; HTTP; ► If you choose PPPoE as the Network Type, the [
VIVOTEK 38 - User's Manual Please follow the steps below to link to an IPv6 address: 1. Open your web browser. 2. Enter the link-global or link-local IPv6 address in the address bar of your web browser. 3. The format should be: 4. Press Enter on the keyboard or click Refresh button to refresh the we...
Page 39 - The components of a protected network with 802.1x authentication:
VIVOTEK User's Manual - 39 IEEE 802.1x Advanced Mode Enable this function if your network environment uses IEEE 802.1x, which is a port-based network access control. The network devices, intermediary switch/access point/hub, and RADIUS server must support and enable 802.1x settings. The 802.1x stand...
Page 40 - A Network Camera requests access to the protected
VIVOTEK 40 - User's Manual 3. When all settings are complete, move the Network Camera to the protected LAN by connecting it to an 802.1x enabled switch. The devices will then start the authentication automatically. NOTE ► The authentication process for 802.1x: 1. The Certificate Authority (CA) provi...
Page 41 - The following are the main benefits of a QoS-aware network:; Requirements for QoS; VLAN ID; ► Though CoS is simple to manage,
VIVOTEK User's Manual - 41 QoS (Quality of Service) Advanced Mode Quality of Service refers to a resource reservation control mechanism, which guarantees a certain quality to different services (voice, data, video, etc) on the network. Quality of service guarantees are important if the network capac...
Page 43 - basic; : By default, the HTTP port is set to 80 and the secondary HTTP port is; Video Settings
VIVOTEK User's Manual - 43 HTTP Advanced Mode To utilize HTTP authentication, make sure that your have set a password for the Network Camera first; please refer to Security on page 26 for details. Authentication : Depending on your network security requirements, the Network Camera provides two types...
Page 44 - For example, when the Access name for; The JPEG images will be displayed in your web browser.; ► Microsoft; HTTPS
VIVOTEK 44 - User's Manual URL command -- http://<ip address>:<http port>/<access name for stream 1 ~ 5> For example, when the Access name for stream 2 is set to video2.mjpg : 1. Launch Mozilla Firefox or Netscape. 2. Type the above URL command in the address bar. Press Enter . 3. ...
Page 45 - RTSP Streaming; Camera first please refer to Security on page 26 for details.; RTSP player
VIVOTEK User's Manual - 45 RTSP Streaming To utilize RTSP streaming authentication, make sure that you have set a password for the Network Camera first; please refer to Security on page 26 for details. Authentication : Depending on your network security requirements, the Network Camera provides thre...
Page 47 - DDNS; dynamic IP address, to have a fixed host and domain name.; DDNS: Dynamic domain name service; : Select this option to enable the DDNS setting.; I accept
VIVOTEK User's Manual - 47 DDNS This section explains how to configure the dynamic domain name service for the Network Camera. DDNS is a service that allows your Network Camera, especially when assigned with a dynamic IP address, to have a fixed host and domain name. DDNS: Dynamic domain name servic...
Page 49 - Access List; General Settings; ■ IP address: Current connections to the Network Camera.; to “disable“. For more; RTSP Authentication
VIVOTEK User's Manual - 49 Access List Advanced Mode This section explains how to control access permission by verifying the client PC’s IP address. General Settings Maximum number of concurrent streaming connection(s) limited to: Simultaneous live viewing for 1~10 clients (including stream 1 ~ stre...
Page 50 - Enable access list filtering; Filter Type
VIVOTEK 50 - User's Manual ■ Refresh: Click this button to refresh all current connections. ■ Add to deny list: You can select entries from the Connection Status list and add them to the Deny List to deny access. Please note that those checked connections will only be disconnected temporarily and wi...
Page 51 - Administrator IP address; Always allow the IP address to access this device
VIVOTEK User's Manual - 51 Network : This rule allows the user to assign a network address and corresponding subnet mask to the Allow/Deny List. For example: Range : This rule allows the user to assign a range of IP addresses to the Allow/Deny List. Note: This rule is only applied to IPv4. For examp...
Page 52 - Video; : This Network Camera supports; Enable time shift caching stream
VIVOTEK 52 - User's Manual Video This section explains how to configure the video settings of the Network Camera. Video Settings Video title : Enter a name that will be displayed on the title bar of the live video. Color : Select to display color or black/white video streams. Power line frequency : ...
Page 53 - Overlay title and time stamp on video; Image Settings
VIVOTEK User's Manual - 53 Overlay title and time stamp on video : Select this option to place the video title and time on the video streams. Note that when the frame size is set to 176 x 144 as shown in the picture below, only the time will be stamped on the video streams. Image Settings Advanced M...
Page 54 - Privacy Mask
VIVOTEK 54 - User's Manual White balance : Adjust the value for the best color temperature. ■ Auto The Network Camera automatically adjusts the color temperature of the light in response to different light sources. The white balance setting defaults to Auto and works well in most situations. ■ Keep ...
Page 55 - ► If you want to delete the; Sensor Settings; Exposure
VIVOTEK User's Manual - 55 NOTE ► Up to 5 privacy mask windows can be set up on the same screen. ► If you want to delete the privacy mask window, please click the ‘x’ on the upper right-hand corner of the window. Sensor Settings Advanced Mode Click Sensor Settings to open the Sensor Settings page. O...
Page 56 - You can click; Profile; the Sensor Settings Profile Settings page as shown below.; Enable this profile
VIVOTEK 56 - User's Manual You can click Preview to fine-tune the image, or click Restore to recall the original settings without incorporating the changes. When completed with the settings on this page, click Save to enable the settings and click Close to exit the page. If you want to configure ano...
Page 57 - Viewing Window
VIVOTEK User's Manual - 57 Viewing Window Advanced Mode Click Viewing Window to open the Viewing Window Settings page. This Network Camera supports multiple streams with frame size ranging from 176 x 144 to 1280 x 800. The definition of multiple streams: ■ Stream 1: Users can define the "Region ...
Page 58 - ■ The parameters of the multiple streams:; to enable the settings and click; Close; to exit the window. The selected; will immediately be applied to the; Frame
VIVOTEK 58 - User's Manual ■ The parameters of the multiple streams: When completed with the settings in the Viewing Window, click Save to enable the settings and click Close to exit the window. The selected Output Frame Size will immediately be applied to the Frame size of video stream. Then you ca...
Page 59 - Video Quality Settings; Customize
VIVOTEK User's Manual - 59 Video Quality Settings Advanced Mode Click the stream item to display the detailed information. This Network Camera offers real-time H.264, MPEG-4 and MJEPG compression standards (Triple Codec) for real-time viewing. The maximum frame size will follow your settings in the ...
Page 60 - JPEG
VIVOTEK 60 - User's Manual ■ Intra frame period Determine how often to plant an I frame. The shorter the duration, the more likely you will get better video quality, but at the cost of higher network bandwidth consumption. Select the intra frame period from the following durations: 1/4 second, 1/2 s...
Page 62 - Motion Detection; New; ■ To move and resize the window, drag and drop your mouse on the window.; Motion Detection Setting 2:
VIVOTEK 62 - User's Manual Motion Detection This section explains how to configure the Network Camera to enable motion detection. A total of three motion detection windows can be configured. Follow the steps below to enable motion detection:Follow the steps below to enable motion detection: 1. Click...
Page 63 - windows can be configured on this page as well.; range if you choose Schedule mode.; detailed information.
VIVOTEK User's Manual - 63 A green bar indicates that even though motions have been detected, the event has not been triggered because the image variations still fall under the defined threshold. If you want to configure other motion detection settings for day/night/schedule mode, please click Profi...
Page 64 - ► How does motion detection work?
VIVOTEK 64 - User's Manual NOTE ► How does motion detection work? There are two motion detection parameters: Sensitivity and Percentage. In the illustration above, frame A and frame B are two sequential images. Pixel differences between the two frames are detected and highlighted in gray (frame C) a...
Page 65 - Camera Tampering Detection; camera is capable of detecting incidents such as; redirection; Enable camera tampering detection; Set up the event source as Camera Tampering Detection on; Application page; . Please refer to page 71 for detailed information.
VIVOTEK User's Manual - 65 Camera Tampering Detection This section explains how to set up camera temper detection. With tamper detection, the camera is capable of detecting incidents such as redirection , blocking or defocusing , or even spray paint . Please follow the steps below to set up the came...
Page 66 - Homepage Layout; Preview; Here you can change the logo at the top of your homepage.; Custom; and the Browse field will appear.; Upload; to replace the existing logo with a new one.; to enable the settings.
VIVOTEK 66 - User's Manual Homepage Layout Advanced Mode This section explains how to set up your own customized homepage layout. Preview This column shows the settings of your homepage layout. You can manually select the background and font colors in Theme Options (the third column on this page). T...
Page 67 - Theme Options; to choose from. The new layout will simultaneously appear in the; to enable the
VIVOTEK User's Manual - 67 Theme Options Here you can change the color of your homepage layout. There are three types of preset patterns for you to choose from. The new layout will simultaneously appear in the Preview filed. Click Save to enable the settings. Font Color of the Video Title Font Color...
Page 68 - ■ Follow the steps below to set up the custom homepage:; The palette window will pop up as shown below.
VIVOTEK 68 - User's Manual ■ Follow the steps below to set up the custom homepage: 1. Click Custom on the left column. 2. Click the field where you want to change the color on the right column. 3. The palette window will pop up as shown below. 4. Drag the slider bar and click on the left square to s...
Page 69 - Application; Customized Script; need more information, please ask for VIVOTEK technical support.; or external digital input devices. When an event is; Click to upload a file
VIVOTEK User's Manual - 69 Application Advanced Mode This section explains how to configure the Network Camera to responds to particular situations (event). A typical application is that when a motion is detected, the Network Camera sends buffered images to an FTP server or e-mail address as notific...
Page 70 - Event Settings; : Select this option to enable the event setting.
VIVOTEK 70 - User's Manual Event Settings In the Event Settings column, click Add to open the Event Settings page. On this page, you can arrange three elements -- Trigger, Schedule, and Action to set an event. A total of 3 event settings can be configured. Event name : Enter a name for the event set...
Page 71 - Trigger
VIVOTEK User's Manual - 71 An event is an action initiated by a user-defined trigger source; it is the causal arrangement of the following three elements: Trigger, Event Schedule, and Action. Trigger This is the cause or stimulus which defines when to trigger the Network Camera. The trigger source c...
Page 72 - ■ Camera tampering detection; to send the media files to) when a trigger is activated.; Add Server; Server Settings; Add Media; Media Settings
VIVOTEK 72 - User's Manual ■ Camera tampering detection This option allows the Network Camera to trigger when the camera detects that is is being tampered with. To enable this function, you need to configure the Tampering Detection option first. Please refer to page 65 for detailed information. Even...
Page 73 - Here is an example of the Event Settings page:; to exit Event Settings page.
VIVOTEK User's Manual - 73 Here is an example of the Event Settings page: When completed, click Save to enable the settings and click Close to exit Event Settings page. The new event settings / server settings / media settings will appear in the event drop-down list on the Application page.
Page 74 - Here is an example of the Application page with an event setting:; If you want to stop the event trigger, you can click; ON; to turn it to; OFF; status or click; Delete; Delete
VIVOTEK 74 - User's Manual Here is an example of the Application page with an event setting: When the Event Status is ON , once an event is triggered by motion detection, the Network Camera will automatically send snapshots via e-mail. If you want to stop the event trigger, you can click ON to turn ...
Page 75 - Server Type; This server requires a secure; To verify if the email settings are correctly configured, click; Test
VIVOTEK User's Manual - 75 Server Settings Click Add Server on Event Settings page to open the Server Setting page. On this page, you can specify where the notification messages are sent when a trigger is activated. A total of 5 server settings can be configured. Server name : Enter a name for the s...
Page 76 - FTP; to enable the settings, then click
VIVOTEK 76 - User's Manual FTP : Select to send the media files to an FTP server when a trigger is activated. ■ Server address: Enter the domain name or IP address of the FTP server. ■ Server port By default, the FTP server port is set to 21. It can also be assigned to another port number between 10...
Page 77 - : Select to send the media files
VIVOTEK User's Manual - 77 HTTP : Select to send the media files to an HTTP server when a trigger is activated. ■ URL: Enter the URL of the HTTP server. ■ User name: Enter the user name if necessary. ■ Password: Enter the password if necessary. To verify if the HTTP settings are correctly configured...
Page 78 - Media Type
VIVOTEK 78 - User's Manual Media Settings Click Add Media on the Event Settings page to open the Media Settings page. On this page, you can specify the type of media that will be sent when a trigger is activated. A total of 5 media settings can be configured. Media name : Enter a name for the media ...
Page 80 - page will pop up for you to manage recorded files
VIVOTEK 80 - User's Manual You can continue to select a server and media type for the event. Please go back to page 66 for detailed information. ■ SD Test: Click to test your SD card. The system will display a message indicating success or failure. If you want to use your SD card for on board storag...
Page 81 - The following is an example of a file destination with video clips:
VIVOTEK User's Manual - 81 The following is an example of a file destination with video clips: Click 20100323 to open the directory: 20100323 20100324 20100325 Click to delete selected items Click to delete all recorded data The format is: YYYYMMDD Click to open the directory 2010/03/23 2010/03/23 V...
Page 82 - Recording; Recording Settings; Network Storage Setting; to check the setting. The result will be shown in the pop-up window.; Insert your SD card and click here to test
VIVOTEK 82 - User's Manual Recording Advanced Mode This section explains how to configure the recording settings for the Network Camera. Recording Settings NOTE ► Before setting up this page, please set up the Network Storage on the Server Settings page first. ► Please remember to format your SD car...
Page 83 - : Enter a name for the recording setting.; When there is no alarm trigger:
VIVOTEK User's Manual - 83 If successful, you will receive a test.txt file on the network storage server. 3. Enter a server name. 4. Click Save to complete the settings and click Close to exit the page. Recording Settings Click Add to open the recording setting page. On this page, you can define the...
Page 84 - ■ Pre-event recording and post-event recording; ► To enable adaptive recording,; enable time shift caching stream; ■ Select the days of the week.
VIVOTEK 84 - User's Manual The alarm trigger includes: motion detection, PIR detection, DI detection, and IVA detection. Please refer to Event Settings on page 70. ■ Pre-event recording and post-event recording The Network Camera has a buffer area; it temporarily holds data up to a certain limit. En...
Page 86 - Local Storage; SD Card Management; SD card status; no SD card
VIVOTEK 86 - User's Manual Local Storage Advanced Mode This section explains how to manage the SD card for on board storage. Here you can view SD card status, search for recorded files to playback, download, etc. SD Card Management SD card status : This column shows the status and reserved space of ...
Page 87 - Searching and Viewing the Records; : Select one or more items as your search criteria.; Search
VIVOTEK User's Manual - 87 SD card control ■ Enable cyclic storage: Check this item if you want to enable cyclic recording. When the maximum capacity is reached, the oldest file will be overwritten by the latest one. ■ Enable automatic disk cleanup: Check this item and enter the number of days you w...
Page 88 - Search Results; View; button and a media window will pop up to play back the selected file.; Enter a key word to filter the
VIVOTEK 88 - User's Manual Search Results The following is an example of search results. There are four columns: Trigger time, Media type, Trigger type, and Locked. Click to sort the search results in either direction. View : Click on a search result which will highlight the selected item in purple ...
Page 89 - Download; JPEGs to AVI
VIVOTEK User's Manual - 89 Download : Click on a search result to highlight the selected item in purple as shown above. Then click the Download button and a file download window will pop up for you to save the file. JPEGs to AVI : This functions only applies to “JPEG“ format files such as snapshots....
Page 90 - System Log; remote server as backup.; Remote Log; Follow the steps below to set up the remote log:; Enable remote log; to enable the setting.; Current Log
VIVOTEK 90 - User's Manual System Log Advanced Mode This section explains how to configure the Network Camera to send the system log to the remote server as backup. Remote Log You can configure the Network Camera to send the system log file to a remote server as a log backup. Before utilizing this f...
Page 91 - View Parameters
VIVOTEK User's Manual - 91 View Parameters Advanced Mode The View Parameters page lists the entire system’s parameters in alphabetical order. If you need technical assistance, please provide the information listed on this page.
Page 92 - Maintenance; Reboot; during the reboot process.; Restore
VIVOTEK 92 - User's Manual Maintenance This chapter explains how to restore the Network Camera to factory default, upgrade firmware version, etc. Reboot This feature allows you to reboot the Network Camera, which takes about one minute to complete. When completed, the live video page will be display...
Page 93 - Export / Upload Files; Export
VIVOTEK User's Manual - 93 Export / Upload Files Advanced Mode This feature allows you to Export / Upload daylight saving time rules, custom language files, and setting backup files. Export daylight saving time configuration file: Click to set the start and end time of DST. Follow the steps below to...
Page 94 - Upload daylight saving time rule; Upgrade Firmware; complete the process.
VIVOTEK 94 - User's Manual Upload daylight saving time rule : Click Browse… and specify the XML file to upload. If the incorrect date and time are assigned, you will see the following warning message when uploading the file to the Network Camera. The following message is displayed when attempting to...
Page 96 - Appendix; URL Commands for the Network Camera
VIVOTEK 96 - User's Manual Appendix URL Commands for the Network Camera 1. Overview For some customers who already have their own web site or web control application, the Network Camera/Video Server can be easily integrated through URL syntax. This section specifies the external HTTP-based applicati...
Page 97 - General CGI URL Syntax and Parameters
VIVOTEK User's Manual - 97 3. General CGI URL Syntax and Parameters When the CGI request includes internal camera parameters, these parameters must be written exactly as they are named in the camera or video server. The CGIs are organized in functionally-related directories under the cgi-bin directo...
Page 99 - Get Server Parameter Values
VIVOTEK User's Manual - 99 5. Get Server Parameter Values Note: The access right depends on the URL directory. Method: GET/POST Syntax: http://< servername >/cgi-bin/ anonymous /getparam.cgi?[ <parameter> ] [&<parameter>…] http://< servername >/cgi-bin/ viewer /getparam.c...
Page 101 - Set Server Parameter Values
VIVOTEK User's Manual - 101 6. Set Server Parameter Values Note: The access right depends on the URL directory. Method: GET/POST Syntax: http://< servername >/cgi-bin/ anonymous /setparam.cgi? <parameter>=<value> [&<parameter>=<value>…][&return=<return page&g...
Page 103 - Available Parameters on the Server
VIVOTEK User's Manual - 103 7. Available Parameters on the Server This chapter defines all the parameters which can be configured or retrieved from VIVOTEK network camera or video server. The general format of description is listed in the table below Valid values: VALID VALUES DESCRIPTION string[<...
Page 108 - Digital Input Behavior Define
VIVOTEK 108 - User's Manual 7.2 Status Group: status NAME VALUE SECURITY (get/set) DESCRIPTION di_i<0~(ndi-1)> <boolean> 1/7 0 => Inactive, normal 1 => Active, triggered onlinenum_rtsp integer 6/7 Current number of RTSP connections. onlinenum_httppush integer 6/7 Current number of ...
Page 117 - Video Input Preview
VIVOTEK User's Manual - 117 agc 0~2 4/4 Auto gain control enableblc <boolean> 4/4 Enable backlight compensation. 7.8 Video Input Preview The temporary settings for video preview Group: videoinpreview NAME VALUE SECURITY (get/set) DESCRIPTION enableblc <boolean> 4/4 Preview of enable back...
Page 118 - Image Setting per Channel
VIVOTEK 118 - User's Manual 7.10 Image Setting per Channel Group: image_c<0~(n-1)> for n channel products NAME VALUE SECURITY (get/set) DESCRIPTION brightness -5 ~ 5 4/4 Adjust brightness of image according to mode settings. saturation -5 ~ 5 4/4 Adjust saturation of image according to mode se...
Page 119 - Motion Detection Settings
VIVOTEK User's Manual - 119 7.13 Motion Detection Settings Group: motion_c<0~(n-1)> for m profile and n channel product NAME VALUE SECURITY (get/set) DESCRIPTION enable <boolean> 4/4 Enable motion detection. win_i<0~2>_enable <boolean> 4/4 Enable motion window 1~3. win_i<0...
Page 120 - Tampering Detection Settings; UPnP Presentation
VIVOTEK 120 - User's Manual 7.14 Tampering Detection Settings Group: tampering_c<0~(n-1)> for n channel product (product dependent) NAME VALUE SECURITY (get/set) DESCRIPTION enable <boolean> 4/4 Enable or disable tamper detection. threshold 0 ~ 255 4/4 Threshold of tamper detection. dura...
Page 121 - UPnP Port Forwarding
VIVOTEK User's Manual - 121 7.17 UPnP Port Forwarding Group: upnpportforwarding NAME VALUE SECURITY (get/set) DESCRIPTION enable <boolean> 6/6 Enable or disable the UPnP port forwarding service. upnpnatstatus 0~3 6/7 The status of UPnP port forwarding, used internally.0 = OK, 1 = FAIL, 2 = no ...
Page 122 - Layout Configuration
VIVOTEK 122 - User's Manual authtyperw MD5,SHA 6/6 Read/write authentication type authtypero MD5,SHA 6/6 Read only authentication type encryptpwrw string[8~128] 6/6 Read/write passwrd encryptpwro string[8~128] 6/6 Read only password encrypttyperw DES 6/6 Read/write encryption type encrypttypero DES ...
Page 127 - Customized Event Script
VIVOTEK User's Manual - 127 network wireless_endchannel 1 ~ 14 0/7 Indicate the end channel of wireless network wireless_encrypt_wep <boolean> 0/7 Indicate whether to support wireless WEP. wireless_encrypt_wpa <boolean> 0/7 Indicate whether to support wireless WPA. wireless_encrypt_wpa2 ...
Page 129 - Server Setting for Event Action
VIVOTEK User's Manual - 129 weekday 0~127 6/6 Indicate which weekday is scheduled. One bit represents one weekday. bit0 (LSB) = Saturday bit1 = Friday bit2 = Thursday bit3 = Wednesday bit4 = Tuesday bit5 = Monday bit6 = Sunday For example, to detect events on Friday and Sunday, set weekday as 66. be...
Page 130 - Media Setting for Event Action
VIVOTEK 130 - User's Manual http_passwd string[64] 6/6 Password of the user. ftp_address string[128] 6/6 FTP server address. ftp_username string[64] 6/6 Username to log in to the server. ftp_passwd string[64] 6/6 Password of the user. ftp_port 0~65535 6/6 Port to connect to the server. ftp_location ...
Page 133 - Storage Management Setting
VIVOTEK User's Manual - 133 7.29 HTTPS Group: https (product dependent) NAME VALUE SECURITY (get/set) DESCRIPTION enable <boolean> 6/6 To enable or disable secure HTTP. policy <Boolean> 6/6 If the value is 1, it will force HTTP connection redirect to HTTPS connection method auto, manual,...
Page 134 - Region of Interest
VIVOTEK 134 - User's Manual 7.31 Region of Interest Group: roi_c<0~(n-1)> for n channel product, and m is the number of streams which support ROI. PARAMETER VALUE SECURITY (get/set) DESCRIPTION s<0~(m-1)>_home <coordinate> 6/6 ROI left-top corner coordinate. s<0~(m-1)>_size &...
Page 135 - Useful Functions; Query Status of the Digital Input; Capture Single Snapshot
VIVOTEK User's Manual - 135 Useful Functions 8.1 Query Status of the Digital Input Note: This request requires Viewer privileges Method: GET/POST Syntax: http://< servername >/cgi-bin/dido/getdi.cgi?[di0][&di1][&di2][&di3] If no parameter is specified, all of the digital input stat...
Page 136 - Account Management
VIVOTEK 136 - User's Manual http://< servername >/cgi-bin/viewer/video.jpg?[channel=<value>][&resolution=<value>] [&quality=<value>][&streamid=<value>] If the user requests a size larger than all stream settings on the server, this request will fail. PARAMET...
Page 137 - Upgrade Firmware
VIVOTEK User's Manual - 137 edit Modify the account password and privilege. When using this method, the “username” field is necessary, and other fields are optional. If not specified,it will keep the original settings. username <name> The name for the user to add, delete, or edit. userpass <...
Page 139 - Get SDP of Streams
VIVOTEK User's Manual - 139 8.7 Event/Control HTTP Tunnel Channel Note: This request requires Administrator privileges. Method: GET and POST Syntax: http://< servername >/cgi-bin/admin/ctrlevent.cgi ------------------------------------------------------------------------- GET /cgi-bin/admin/ct...
Page 140 - Open the Network Stream
VIVOTEK 140 - User's Manual http://< servername >/<network_rtsp_s<0~m-1>_accessname> “m” is the stream number. “network_accessname_<0~(m-1)>” is the accessname for stream “1” to stream “m”. Please refer to the “subgroup of network: rtsp” for setting the accessname of SDP. You...
Page 144 - Technical Specifications
VIVOTEK 144 - User's Manual Technical Specifications Specifications ．CPU: TI DM365 SoC ．Flash: 128MB ．RAM: 256MB ．Embedded OS: Linux 2.6 System ．FD8133 (DC po w er) ．FD8134 (PoE) Models ．Board lens, Fixed, f = 3.6 mm, F1.8 ．Remo v able IR-cut filter for day & night function (FD8134) Lens ．56 ° (...
Page 145 - Technology License Notice; MPEG-4 AAC Technology; MPEG-4 Visual Technology
VIVOTEK User's Manual - 145 Technology License Notice MPEG-4 AAC Technology THIS PRODUCT IS LICENSED UNDER THE MPEG-4 AAC AUDIO PATENT LICENSE. THIS PRODUCT MAY NOT BE DECOMPILED, REVERSE-ENGINEERED OR COPIED, EXCEPT WITH REGARD TO PC SOFTWARE, OF WHICH YOU MAY MAKE SINGLE COPIES FOR ARCHIVAL PURPOS...
Page 146 - FCC Statement; case the user may be required to take adequate measures.; VCCI Warning; 取扱説明書に従って正しい取り扱いをして下さい; Liability
VIVOTEK 146 - User's Manual Electromagnetic Compatibility (EMC) FCC Statement This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions. ■ This device may not cause harmful interference, and■ This device must accept any interference received, including interfe...
Vivotek 63E-M
Manual
Vivotek fd8363
Manual
Vivotek PT3112/3122
Manual
Vivotek PT3122
Manual
Vivotek PZ7132
Manual
Vivotek IP6124
Manual
Vivotek IP71353ISMA
Manual
Vivotek IP7135
Manual
Vivotek IP2121
Manual
Vivotek PT1111H
Manual
Vivotek 8137HV
Manual
Vivotek FD-8372
Manual
Vivotek IP7132
Manual
Vivotek IP8372
Manual
Vivotek PT71373GPP/ISMA
Manual
Vivotek FD8371EV
Manual
Vivotek vc8201
Manual
Vivotek PT8133
Manual
Vivotek IP8155
Manual