Vivotek IP7139 - Manual

Installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera. Hardware installation Please verify that your product package contains all the ac...

- 8 - www.vivotek.com To install in Ethernet Make sure the Ethernet is firmly connected to a switch hub. After attaching the Ethernet cable plug in the power adapter. If the LED turns out to blink green-color, go to next paragraph “Software installation”. If the Ethernet is not available, Network Ca...

- 9 - www.vivotek.com Once installation is complete, the Administrator should proceed to the next section "Initial access to the Network Camera" for necessary checks and configurations. Initial Access to the Network Camera Check Network Settings The Network Camera can be connected either bef...

- 10 - www.vivotek.com only option is to restore to the original factory default settings. How to Use A PC with Windows operating system can use the Internet Explorer to connect to the Network Camera. A plug-in will be installed into the IE when it is connected for the first time. A PC with Linux op...

Primary user’s capability Main Screen with Camera View The main page layout has two parts: Configuration functions : The camera can be configured using these user interfaces. Camera View : What the camera sees. Click on the configuration link to the left of the image window to enter the configuratio...

16 - User's Manual VIVOTEK - A Leading Provider of Multimedia Communication Solutions Digital Zoom Click on the magnifier icon under the camera view then the digital zoom control panel will be shown. Uncheck “Disable digital zoom” and use the slider control to change the zoom factors.

MP4 Recording Click on the red circle button on the plugin to start MP4 recording. You can set the related options in client setting page. Snapshot Click on “ Snapshot ”, web browser will pop up a new window to show the snapshot. Users can point at the snapshot and click the right button of mouse to...

Language Click on the language, all supported languages are shown in the drop-down list. The user can choose the different display language. Client settings There are four settings for the client side in IE. The first one is “ Stream Options ” for users to determine which stream to be streaming. Thi...

- 20 - www.vivotek.com <url> http://<Network Camera>/clientset.html <Network Camera> is the domain name or the original IP address of the Network Camera. Digital output Click on “ ON ”, the digital output of the Network Camera will be triggered. Or, Clicking on “ OFF ” can let the ...

User's Manual - 21 VIVOTEK - A Leading Provider of Multimedia Communication Solutions For Viewing by Mobile Phone Most 3GPP cell phone supports media streaming with MPEG4 video and GSM-AMR audio. Due to the limitation of the bandwidth for 3GPP, only 176x144 video solution will be supported for cell ...

- 22 - www.vivotek.com For Best Real-time Video Images To achieve good real-time visual effect, the network bandwidth should be large enough to allow a transmission rate of greater than 20 image frames per second. If the broadband network is over 1 Mbps, set the “Fix bit rate” to 1000Kbps or 1200Kbp...

- 23 - www.vivotek.com Opening accounts for new users Protect Network Camera by passwords The Network Camera is shipped without any password by default. That means everyone can access the Network Camera including the configuration as long as the IP address is known. It is necessary to assign a passw...

- 24 - www.vivotek.com Build a security application The Administrator can use the built-in motion detection to monitor any movement to perform many useful security applications. To upload the snapshots, users can choose either email, FTP, HTTP, Network storage or CF according to user’s needs. All se...

- 25 - www.vivotek.com z Set the appropriate delay time to avoid continuous false alarms following the original event z Check the server name set in Step 10 and select the media name set in Step 11. 13.Click on save to validate. Software revision upgrade Customers can obtain the up-to-date software ...

Definitions in Configuration Only the Administrator can access system configuration. Each category in the left column will be explained in the following pages. The bold texts are the specific phrases on the Option pages. The Administrator may type the URL below the figure to directly enter the frame...

- 27 - www.vivotek.com System parameters "Host name" The text displays the title at the top of the main page. “Turn off the LED indicator” Check this option to shut off the LED on the rear. It can prevent the camera’s operation being noticed. "Time zone" Adjust the time with that of ...

- 28 - www.vivotek.com Security settings “Root password” Change the Administrator’s password by typing in the new password identically in both text boxes. The typed entries will be displayed as asterisks for security purposes. After pressing , the web browser will ask the Administrator for the new p...

HTTPS The Network Camera provides authentication and encrypted communication over SSL. "Enable HTTPS" Select this option to turn on the HTTPS communication. "Create and Install Certificate" Select either to create a self-signed certificate or a signed certificate. To create a certifica...

- 30 - www.vivotek.com Network settings Any changes made on the Network type sectoin will restart the system in order to validate the changes. Make sure every field is entered correctly before clicking on . Network type “LAN” & “PPPoE” The default type is LAN. Select PPPoE if using ADSL "Get...

- 34 - www.vivotek.com WLAN Settings “SSID” (Service Set Identifier), it is a name that identifies a wireless network. Access Points and wireless clients attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same SSID. The default setting is default . Note: The maximum ...

- 36 - www.vivotek.com DDNS “Enable DDNS” This option turns on the DDNS function. “Provider” The provider list contains four hosts that provide DDNS services. Please connect to the service provider’s website to make sure the service charges. “Host Name” If the User wants to use DDNS service, this fi...

Access List The access list is to control the access permission of clients by checking the client IP address. There are two lists for permission control: Allow List and Deny List . Only those clients whose IP address is in the Allow List and not in the Deny List can connect to the Video Server or Ne...

- 38 - www.vivotek.com Audio and Video This product supports dual-stream. It provides two setting for video streams, but only one setting for audio. Video Settings “Video title” The text string can be displayed on video “Color” Select either for color or monochrome video display. “Power line frequen...

- 39 - www.vivotek.com There are three dependent parameters provided in MPEG-4 mode for video performance adjustment. “Intra frame period” The interval of intra frame. “Max frame rate” This limits the maximal refresh frame rate, which can be combined with the “Video quality” to optimize bandwidth ut...

- 41 - www.vivotek.com Image Settings Click on this button to pop up another window to tune “Brightness” , “Contrast” , “Hue” and “Saturation” for video compensation. Each field has eleven levels ranged from -5 to +5. In “Brightness” and “Contrast” fields the value 0 indicates auto tuning. The user ...

- 42 - www.vivotek.com Privacy Mask Click on the button to pop up another window to set privacy mask window. All user can not view the block under privacy mask window. “Enable privacy mask” Check this option to turn on privacy mask. Click on this button to add a new window. At most five windows can ...

- 43 - www.vivotek.com Click on this button to save the related window settings. "Window Name" The text will show at the top of the window. The following figure shows the screen when is clicked and the privacy mask is enabled. Motion detection “Enable motion detection” Check this option to t...

- 45 - www.vivotek.com Application There are three sections in application page. They are event, server and media. Click to pop a window to add a new item of event, server or media. Click to delete the selected item from event, server or media. Click on the item name to pop a window to edit it. Ther...

<url> http://<Network Camera>/setup/application.htm <Network Camera> is the domain name or original IP address of the Network Camera. Event “Event name” The unique name for event “Enable this event” Check it to enable this event. “Priority” The event with higher priority will be ex...

- 48 - www.vivotek.com Server “Server name” The unique name for server There are four kinds of servers supported. They are email server, FTP server, HTTP server and network storage. Here is setting for email server. “Sender email address” The email address of the sender “Recipient email address” The...

correct. The testing result will be shown in a pop-up window. Media “Media name” The unique name for media There are three kinds of media. They are snapshot, video clip and system log. Here is setting for snapshot. “Source” The source of stream, stream1 or stream2. “Send Pre-event images” The number...

Recording The Network camera supports recording on CF and network storage. The operation of editing recording item is the same as the one in application page. User can know the recording name, status, weekly and time schedule, stream source and destination of recording. There can be at most two reco...

- 53 - www.vivotek.com System log The Network camera support log the system messages on remote server. The protocol is compliant to RFC 3164. If you have external Linux server with syslogd service, use “-r” option to turn on the facility for receiving log from remote machine. Or you can use some sof...

<url> http://<Network Camera>/setup/syslog.htm <Network Camera> is the domain name or original IP address of the Network Camera. Viewing system parameters Click on this link on the configuration page to view the entire system’s parameter set. 58 - User's Manual VIVOTEK - A Leading ...

60 - User's Manual VIVOTEK - A Leading Provider of Multimedia Communication Solutions Maintenance This chapter explains how to restore the Network Camera to factory default, upgrade firmware version, etc. "Reboot" Click this button to turn off and turn on the Network Camera. It takes about o...

- 58 - www.vivotek.com Appendix A. Troubleshooting Status LED The following table lists the LED patterns in general. Condition LED color Loading system after power on Steady green and blink red (once) During booting procedure Steady green Detecting and setting network Steady orange (green + red) til...

- 59 - www.vivotek.com Restoring the factory defaults will erase any previous settings. Reset or restore the system after power on. RESTORE: 1. Press on the button continuously. 2. Wait for self-diagnostic to run twice. 3. Free the button as soon as the second self-diagnostic starts. B. URL commands...

- 60 - www.vivotek.com URL syntax' are written with the “ Syntax: " word written in bold face followed by a box with the referred syntax as seen below. The name of the server is written as <servername>. This is intended to be replaced with the name of the actual server. This can either be ...

- 63 - www.vivotek.com \r\n network.ipaddress=192.168.0.123\r\n Set server parameter values Note: The access right depends on the URL directory. Method: GET/POST Syntax: http://< servername >/cgi-bin/ anonymous /setparam.cgi? <parameter>=<value> [&<parameter>=<value>...

- 64 - www.vivotek.com file(.htm, .html) or a Vivotek server script executable (.vspx) file. It can not be a CGI command. It can not have any extra parameters. This parameter must be put at end of parameter list) Return: HTTP/1.0 200 OK\r\n Content-Type: text/html\r\n Context-Length: <length>\...

- 89 - www.vivotek.com Drive the digital output Note: This request requires the privilege of viewer. Method: GET/POST Syntax: http://< servername >/cgi-bin/dido/setdo.cgi?do1= <state> [&do2=<state>] [&do3=<state>][&do4=<state>][&return= <return page&g...

- 90 - www.vivotek.com http://< servername >/cgi-bin/dido/getdi.cgi?[di0][&di1][&di2][&di3] If no parameter is specified, all the status of digital input will be returned. Return: HTTP/1.0 200 OK\r\n Content-Type: text/plain\r\n Content-Length: <length> \r\n \r\n [di0= <st...

- 91 - www.vivotek.com http://< servername >/cgi-bin/dido/getdo.cgi?[do0][&do1][&do2][&do3] If no parameter is specified, all the status of digital output will be returned. Return: HTTP/1.0 200 OK\r\n Content-Type: text/plain\r\n Content-Length: <length> \r\n \r\n [do0= <s...

- 92 - www.vivotek.com Syntax: http://< servername >/cgi-bin/viewer/video.jpg?[channel=<value>][&resolution=<value>] [&quality=<value>] If the user requests the size larger than all stream setting on the server, this request will failed! PARAMETER VALUE DEFAULT DESCRI...

- 93 - www.vivotek.com [&privilege=<value>][…][&return= <return page> ] PARAMETER VALUE DESCRIPTION add Add an account to server. When using this method, “username” field is necessary. It will use default value of other fields if not specified. delete Remove an account from serve...

Syntax: http://< servername >/cgi-bin/admin/syslog.cgi Server will return the up-to-date system log. Return: HTTP/1.0 200 OK\r\n Content-Type: text/plain\r\n Content-Length: <syslog length>\r\n \r\n <system log information>\r\n Upgrade firmware Note: This request requires administr...

IP filtering Note: This request requires administrator access privilege Method: GET/POST Syntax: http://< servername >/cgi-bin/admin/ipfilter.cgi? method=<value>&[start= <ipaddress> &end= <ipaddress> ][&index=< value >] [&return=<return page>] PARA...

- 96 - www.vivotek.com start <ip address> The start IP address to add or to delete. end <ip address> The end IP address to add or to delete. index <value> The start position to add or to delete. return <return page> Redirect to the page <return page> after the parameter...

- 97 - www.vivotek.com D. Technical specifications - System CPU: Vivotek VVTK-1000 RAM: 64MB SDRAM ROM: 8MB FLASH ROM - Networking Protocol TCP/IP, HTTP, SMTP, FTP, DDNS, UPnP, Telnet, NTP, DNS, DHCP and RTSP Physical 10 baseT or 100 baseT Fast Ethernet auto negotiation - Video Algorithm supported M...

Technology License Notice MPEG-4 AAC Technology THIS PRODUCT IS LICENSED UNDER THE MPEG-4 AAC AUDIO PATENT LICENSE. THIS PRODUCT MAY NOT BE DECOMPILED, REVERSE-ENGINEERED OR COPIED, EXCEPT REGARD TO PC SOFTWARE, YOU MAY MAKE SINGLE COPIES FOR ARCHIVAL PURPOSES. FOR MORE INFORMATION, PLEASE REFER TO ...