Viking VUIW518 - Manuals

5 Installation Dimensions A 17-1/2” 4.5 cm B 4-1/2” 1.8 cm C 2-7/8” 7.4 cm D 2-1/4” 5.7 cm E 3-1/4” 8.3 cm F 1-3/16” 3.0 cm G 2-1/2” 6.3 cm H 3-13/16” 9.7 cm J 1” 2.5 cm Dimensions

6 Installation Electrical Requirements The induction warmer must be properly grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shockby providing a safe path for the electric current. The induction warmer has a power cord with a 3-prong grounding plug, whic...

7 Installation The Incogneeto™ can be used with natural stone or “engineered stone” (crushed stone and polymer resin composite). It is notrecommended for use with “solid surfaces” (all polymer resin). Important Characteristics Of NATURAL Stone Stone is a natural material with random natural defects ...

8 Installation Mounting the Unit The square collar should be installed first using 1/2” (1.2 cm) screws.Make sure that it is perfectly square. The unit is mounted simply by snapping into the collar via four springmounted “buttons”. The collar has holes pre-drilled on all four sides, butonly two side...

9 Installation In all cases, the Magneeto TM II wireless communicator tab must sit over the antenna side of the unit installed under the counter. The antenna runs the whole length of the unit, so that the Magneeto TM II can be used in the “6 o’clock” or “3 o’clock” positions. Side Top Mount units on...

10 Using Your Induction Warmer User Buttons Power button - Use this button to turn the unit on and off. A green LED will indicate when the unit is on. Lock button - Use this button to prevent users from adjusting settings. Pressing this button three times will lock the unit. When the unit is locked,...

11 Using Your Induction Warmer Programming Magneeto TM II ● Starting with the unit off, hold the Down Arrow while pressing the Power button. ● The display will start with the text “CLR.” Use this to clear the tag (the unit will no longerenter auto mode). Otherwise, use the Up and Down Arrows to sele...

12 Using Your Induction Warmer Setting the Timer The Incogneeto units are equipped with a timer alarm that can be set to alert the operator when a pan has been on the unit for a period of time up to 240 minutes (4 hours). To enable/disable the timer: ● Starting with the unit off, hold the Down Arrow...

13 Care and Maintenance Incongnito Induction warmer Unit Your induction warmer is easy to keep clean. Be sure to follow these easy instructions:● Turn the unit OFF and remove the plug from any power outlets prior to cleaning. ● Never immerse the induction warmer in water or put in in the dishwasher....

14 Troubleshooting Symptom Probable Cause Possible Solution No power(No lights or fannoise) ● Unit unplugged ● No power to receptacle ● Plug unit into appropriate receptacle ● Make sure that receptacle is energized ● Check wall switches ● Check circuit breaker ● Plug a different electronic device in...

15 Service Information If service is required, call your dealer or authorized service agency. The name of the authorized service agency can be obtained fromthe dealer or distributor in your area. Have the following information readily available:• Model number• Serial number• Date purchased• Name of ...

Warranty BUILT-IN INDUCTION WARMER WARRANTY ONE YEAR FULL WARRANTY Built-in induction warmers and all of their component parts, except as detailed below*†, are warranted to be free from defective materials or workmanship in normal residential use for a period of one (1) year from the date of origina...