ViewSonic PJD5112 - Manuals

Page 2 - Compliance Information; FCC Statement

Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired op...

Page 3 - Important Safety Instructions; manufacturer’s instructions.; ii

Important Safety Instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this unit near water.6. Clean with a soft, dry cloth.7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s inst...

Page 4 - Declaration of RoHS Compliance; Substance; Examples of exempted components are:

Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply ...

Page 5 - Copyright Information; Copyright; Product Registration; For Your Records; ViewSonic DLP Projector

Copyright Information Copyright © ViewSonic ® Corporation, 2010. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc.Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries....

Page 6 - Notes on the AC Power Cord

EN-3 Notes on the AC Power Cord AC Power Cord must meet the requirement of countries where you use this projector.Please confirm your AC plug type with the graphics below and ensure that the properAC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet,please contact your ...

Page 7 - CONTENTS

EN-4 CONTENTS Introduction ........................................................................................................5 Projector Features ....................................................................................................... 5Package Contents .............................

Page 8 - Introduction; Projector Features

EN-5 Introduction Projector Features The projector integrates high-performance optical engine projection and a user - friendlydesign to deliver high reliability and ease of use.The projector offers the following features: Single chip 1.397cm / 0.55" Texas Instruments DLP ® technology SVGA (8...

Page 9 - Package Contents; Optional accessories

EN-6 Package Contents When you unpack the projector, make sure you have all these components: Optional accessories Projector with Lens Cap AC Power Cord Remote Control (IR) ViewSonic CD Wizard Quick Start Guide VGA Cable (D-SUB to D-SUB) RS232 cableP/N: J2552-0208-00 RGB to component adapterP/N: J25...

Page 10 - Projector Overview; Front View

EN-7 Projector Overview Front View Lens cap Elevator button Speaker Lens cap strap Focus ring Projection lens Zoom ring Front IR remote control sensor Control panel Ventilation holes (intake) Lamp cover 11 10 9 1 3 5 4 7 6 2 8 1 7 2 8 3 9 4 10 5 11 6

Page 12 - Using the Product; Control Panel; LED

EN-9 Using the Product Control Panel LED Button Function Power (Power LED indicator) Refer to “LED Indicator Messages”. TEMP (Temperature LED indicator) Refer to “LED Indicator Messages”. LAMP (Lamp LED indicator) Refer to “LED Indicator Messages”. / Keystone Manually correct distorted images result...

Page 13 - Connection Ports

EN-10 Connection Ports USB This connector is for firmware update and mouse function support. VIDEO Connect composite video output from video equipment to this jack. S-VIDEO Connect S-Video output from video equipment to this jack. MONITOR OUT Connect to a computer display, etc. COMPUTER IN 1 Connect...

Page 14 - Remote Control

EN-11 Remote Control POWER Turn the projector on or off. Four directional buttons Use four directional buttons to select items or make adjustments to your selection. MENU Display or exit the on-screen display menus. Enter Confirmed selections. Exit Exit OSD Menu. Keystone+ / - Adjust image distortio...

Page 15 - Replacing the Battery; For the first time use:

EN-12 Replacing the Battery For the first time use: Remove the transparent insulation tape by pullingit before use. For battery change: 1. Push the catch to the left and remove the battery holder. 2. Remove the old Lithium coin cell and install new one(CR2025). Ensure that the side with the mark “+”...

Page 16 - Remote Control Operation

EN-13 Remote Control Operation Point the remote control at the infrared remote sensor and press a button. Operating the projector from the front Operating the projector from the rear 10 15 7m 5m 5m 10 15 7m 5m 5m The remote control may not operate when there is sunlight or other strong light s...

Page 17 - Installation; Connecting the Projector

EN-14 Installation Connecting the Projector USB Cable VGA (D-Sub) to HDTV (RCA) Cable VGA Cable (D-Sub to D-Sub) Composite Video Cable RS-232 Cable S-Video Cable Audio Cable 1 5 2 6 3 7 4 2 2 1 4 Desktop type Laptop type 2 3 5 5 6 7 4 WPG-350 4 When connecting cable, power cords of both projector ...

Page 18 - Powering On/Off the Projector; Powering On the Projector:; SOURCE; Powering Off the Projector:

EN-15 Powering On/Off the Projector Powering On the Projector: 1. Remove the projector lens cap. 2. Complete the AC power cord and peripheral signal cable(s) connections. 3. Press button to turn on the projector. The projector takes a minute or so to warm up. 4. Turn on your source (computer, notebo...

Page 19 - Adjusting the Projector; Adjusting the Projector Height

EN-16 Adjusting the Projector Adjusting the Projector Height The projector is equipped with an elevator foot to adjust the image height.To raise or lower the image:1. To raise or lower the image, press the elevator button and raise or lower the frontof the projector. Release the button to lock the a...

Page 20 - Adjusting Projection Image Size

EN-17 Adjusting Projection Image Size Refer to the graphic and table below to determine the screen size and projection distance. Position the projector in a horizontal position; other positions can cause heat build-up and damage to the projector. Keep a space of 30 cm or more between the sides o...

Page 23 - How to operate

EN-20 How to operate 1. Press the MENU button to open the OSD menu. 2. When OSD is displayed, use S / T to select any feature in the main menu. 3. After selecting the desired main menu item, press X to enter sub-menu for feature setting. 4. Use S / T to select the desired item and adjust the setting...

Page 27 - Maintenance; Warning; Cleaning the Lens

EN-24 Maintenance The projector needs proper maintenance. You should keep the lens clean as dust, dirtor spots will project on the screen and diminish image quality. If any other parts needreplacing, contact your dealer or qualified service personnel. When cleaning any partof the projector, always s...

Page 28 - Replacing the Lamp

EN-25 Replacing the Lamp As the projector operates over time, the brightness of the projector lamp graduallydecreases and the lamp becomes more susceptible to breakage. We recommendreplacing the lamp if a warning message is displayed. Do not attempt to replace thelamp yourself. Contact the qualified...

Page 30 - Specifications

EN-27 Specifications Display system Single 1.397cm / 0.55" DLP panel Resolution SVGA (800 × 600) Zoom 1. 2 X F/No. 2.54 - 2.78 Focal length 18.36 - 22.02mm Screen size 101.6cm ~ 762cm / 40” – 300” Lamp 180W Input terminal D-Sub 15-pin x 2, S-VIDEO x 1, VIDEO x 1, Audio signal input (3.5 mm stere...

Page 31 - Appendix; LED Indicator Messages

EN-28 Appendix LED Indicator Messages LED Type Color Status Meaning Power LED Blue Solid The projector is in standby mode. Lamp LED Off Off Temp LED Off Off Power LED Blue Solid Powering up Lamp LED Off Off Temp LED Off Off Power LED Blue Solid Normal operation Lamp LED Off Off Temp LED Off Off Powe...

Page 32 - Compatibility Modes

EN-29 Compatibility Modes Computer: Compatibility Resolution H-Sync [KHz] V-Sync [Hz] VGA 640 x 480 24.6 50.0 31.5 59.9 37.9 72.8 37.5 75.0 43.3 85.0 640 x 480 @ 120Hz 61.9 119.5 720 x 400 31.5 70.0 37.9 85.0 SVGA 800 x 600 31.0 50.0 35.2 56.0 37.9 60.3 48.1 72.0 46.9 75.0 53.7 85.1 76.3 120.0 800 x...

Page 34 - Troubleshooting; Image problems; Remote control problems

EN-31 Troubleshooting Refer to the symptoms and measures listed below before sending the projector forrepairs. If the problem persists, contact your local reseller or service center. Pleaserefer to "LED Indicator Messages" as well. Start-up problems If no lights turn on: Be sure that the p...

Page 35 - RS-232 Command and Configuration

EN-32 RS-232 Command and Configuration Baud Rate:19200 Parity Bit:none Data Bit:8 Stop Bit:1 Assign Port:COM1 Name Operation type CRC Header Command Response Power ON BE, EF, 10, 05, 00, C6, FF, 11, 11, 01, 00, 01, 00 06 OFF BE, EF, 03, 06, 00, DC, DB, 69, 00, 00, 00, 00, 00 06 Source Computer (Anal...

Page 36 - Wire List

EN-33 D-Sub 9 pin 1 1 CD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI Wire List C1 COLOR C2 1 Black 1 2 Brown 2 3 Red 3 4 Orange 4 5 Yellow 5 6 Green 6 7 Blue 7 8 Purple 8 9 White 9 SHELL DW SHELL

Page 37 - IR Control Code

EN-34 IR Control Code Key Format Byte1 Byte2 Byte3 Byte4 Power NEC 83 F4 13 87 Source NEC 83 F4 13 02 Up NEC 83 F4 13 82 Down NEC 83 F4 13 85 Left NEC 83 F4 13 83 Right NEC 83 F4 13 81 MENU NEC 83 F4 13 84 Auto NEC 83 F4 13 64 Mouse NEC 83 F4 13 6B ViewMatch NEC 83 F4 13 63 Freeze NEC 83 F4 13 80 En...

Page 38 - Customer Support; You will need the product serial number.

Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Country/Region Web Site T=TelephoneF=Fax E-mail Australia/New Zealand www.viewsonic.com.au AUS=1800 880 818NZ=0800 008 822 [email protected]...

Page 39 - Limited Warranty; VIEWSONIC; What the warranty covers:; warranty information.; Who the warranty protects:; This warranty is valid only for the first consumer purchaser.; What the warranty does not cover:; b. Operation outside of product specifications.

Limited Warranty VIEWSONIC ® PROJECTOR What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic wil...

Page 40 - Limitation of implied warranties:; Any claim against the customer by any other party.; Effect of state law:; contact ViewSonic or your local ViewSonic dealer.

h. Use of supplies or parts not meeting ViewSonic’s specifications. i. Normal wear and tear. j. Any other cause which does not relate to a product defect. 3. Removal, installation, and set-up service charges. How to get service: 1. For information about receiving service under warranty, contact View...

Page 41 - Mexico Limited Warranty

Mexico Limited Warranty VIEWSONIC ® PROJECTOR What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSo...