VEVOR BYCSPQSDJAC10PBM8V1 - Manuals

Page 3 - are any technology or software updates on our product.; VENTILATION FAN

- 2 - Have product questions? Need technical support? Please feel free to contact us: [email protected] NEED HELP? CONTACT US! This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appear- ance ...

Page 4 - SAFETY PRECAUTIONS

- 3 - 【 Contents 】 Ⅰ 、 SAFETY PRECAUTIONS Ⅱ 、 PRODUCT DESCRIPTION Ⅲ 、 INSTALLATION Ⅳ 、 DIMENSION AND SPECIFICATION Ⅴ 、 POWERING AND SETUP Ⅵ 、 CLEANING Ⅶ 、 PROGRAMMING Ⅷ 、 FAQ Ⅸ 、 ATTENTIONS SAFETY PRECAUTIONS WARNING Improper operation may cause personal injury.Improper operation may cause damage to...

Page 6 - PRODUCT DESCRIPTION

- 5 - PRODUCT DESCRIPTION TECHNICAL PARAMETER BrandModel BT-FL14A BT-FL16A BT-FL18A Voltage 120 V 120 V 120 V Frequency 60 Hz 60 Hz 60 Hz Power 31 W 60 W 126 W Speed 2550 RPM 2600 RPM 2500 RPM Duct Size Φ 100/ Φ 125 Φ 150/ Φ 160 Φ 200 Power Cord Length 1.6 M 1.6 M 1.6 M Working Ambient Temperature -...

Page 7 - INSTALLATION; Prepare tools in advance:

- 6 - INSTALLATION Prepare tools in advance: Cross screwdriver, Hammer

Page 10 - finish the installation.

- 9 - 5 、 Place the plastic clamps back onto the flanges and tighten the screws back to secure the motor box. See the (Fig.9.) Step 3 ： 1 、 If installing ducting, purchase a suitable duct and duct clamp and secure it to both ends of the fan to ensure tight sealing. Finally tighten the air duct clamp...

Page 11 - DIMENSION; Dimension

Page 12 - HOW TO USE; Speed control; Tip:Slight motor sound is normal when running at low speed

- 11 - HOW TO USE Speed control The controller has a button, and the fan speed is stepless.Turn the button to adjust thewind speed from the highest to the lowest, and select the wind speed you need.Seethe (Fig.12.) Tip:Slight motor sound is normal when running at low speed MAINTENANCE 1. Regular mai...

Page 13 - CLEANING

- 12 - CLEANING Step 1: Remove the motor box from the mounting flange.(Refer installation steps 1 to learn howto of the mounting installation section to learn how to remove the motor box). (Fig.13.) Step 2: Use a damp cloth to clear the impeller and fan blades of any dust and debris. Remove thewind ...

Page 14 - ATTENTIONS