Velodyne SPL-800R - Manuals

Page 2 - CCaauuttiioonn; Refer servicing to qualified service personnel.

1 CCaauuttiioonn To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within th...

Page 4 - INSTALLATION

• Built-in 2000 watts Dynamic/1000 watts RMS high efficiency Class D amplifier • Adjustable (40 to 120 Hz) low-pass crossover (defeatable)• Line-level (RCA) inputs and outputs • Speaker-level inputs with five way binding post connections • Signal sensing auto turn on/off (defeatable) • Variable volu...

Page 5 - REAR PANEL CONNECTIONS; Figure 1 shows the connections on the rear panel of the SPL-R.; CAUTION

Figure 1. SPL-R Rear Panel Connections REAR PANEL CONNECTIONS Figure 1 shows the connections on the rear panel of the SPL-R. Following are brief descriptions of the connections described in Figure 1. More detail on these connections can be found in the next section. 4 WARNING: TO REDUCE THE RISK OF ...

Page 8 - A Word About Your Receiver’s Crossover

seamless transition from the subwoofer to the main speakers in your system. If your main speakers are smaller units with limited low frequency output, you may wish to choose a higher frequency (such as 100 -120 Hz) than you would with larger speakers which have greater low frequency output. With lar...

Page 9 - INTERCONNECT CABLES; Placement

To bypass the subwoofer’s internal crossover when the unit is being fed a low pass signal from another crossover, simply locate the switch marked “LOW-PASS CROSSOVER” on the rear panel of the subwoofer and turn it counterclockwise to the leftmost position. This will eliminate the internal crossover ...

Page 10 - USAGE; Remote Control; Figure 2. Remote Control

typically far away from any walls, close to the center of your room and near an opening or doorway. Avoid these locations when possible. When using a pair of Velodyne subwoofers in stereo, it is preferable to place each subwoofer by the satellite of the same channel. Typically, a minimum distance of...

Page 14 - Restore Defaults

Each preset has its own characteristics with respect to subsonic filter, volume differential and a single equalizer (EQ) in order to optimize the listening mode for the preset. The following table shows the settings for the various presets: Subsonic EQ EQ Volume Preset Filter Frequency Level Differe...

Page 15 - Thank You for Purchasing an SPL-R Subwoofer!

CARE OF YOUR SUBWOOFER Do not use any harsh detergents or chemicals to clean the cabinet. Abrasives, detergents, or cleaning solutions will damage the finish on the cabinet. We recommend using a damp cloth to clean the front, back and sides. During normal conditions, the subwoofer may be left on con...

Page 17 - LIMITED WARRANTY; TO OBTAIN SERVICE

FOR YOUR RECORDS. . . DATE PURCHASED____________________________________ DEALER_____________________________________________ SERIAL #____________________________________________ NOTE: Please complete and return your warranty card within ten (10) days or Register....ON-LINE.....It’s faster.....and ea...

Page 18 - Other Velodyne Subwoofers:; Digital Drive® Series; Signature EditionTM; DPS Series

Tell others what you think! Visit www.audioreview.com and write a review of your new subwoofer! Other Velodyne Subwoofers: Velodyne Acoustics, Inc. 345 Digital Drive Morgan Hill, CA 95037 408.465.2800 voice 408.779.9227 fax 408.779.9208 service fax www.velodyne.com Service e-mail: [email protected]...