Vantec UGT-IS602R - Manuals

the virtual disk. Figure 1 Configuration Wizard 2. Press Space to select/unselect a disk, as shown in Figure 2. Use the arrow keys to scroll the list of free disks. Figure 2 Select Free Disks  UGT‐IS602R                                                                                  Page 6 

Note: The 2+1 SATA 6G & PATA PCI-E COMBO HOST CARD WITH RAID supports the creation of RAID 0 and RAID 1 virtual disks comprising of exactly two SATA physical disks. PATA physical disks cannot be used to create RAID virtual disks. 3. After selecting the required disks, press Enter to continue, as...

4. Create Virtual Disk by configuring its setting in the Information pane, as shown in Figure 4. The controls for making selection are listed in the Help pane when an available setting is highlighted. Figure 4 Configure Virtual Disk  UGT‐IS602R                                                        ...

Note: Max size (MB) and Disk ID are properties of the virtual disk that cannot be edited. Max size (MB) in the size of the RAID virtual disk as determined by the selected RAID Level. Disk ID lists the IDs of the physical disks comprising the virtual disk. 5. RAID Level , as shown in Figure 4, is hig...

Note: The default Level is RAID 0. 7. Scroll to Stripe Size and press Enter to select. A menu pops-up, as shown in Figure 6, and lists available stripe sizes for the selected RAID level. 8. Scroll the list, as shown in Figure 6, and press Enter to select Stripe Size (32K, 64K) Figure 6 Stripe Size U...

Note: The default size is 64 KB. 9. Scroll to Gigabyte Rounding and press Enter to select. A menu pops-up, as shown in Figure 7, and lists available stripe sizes for the selected RAID level. 10. Scroll the list, as shown in Figure 7, and press Enter to select Gigabyte Rounding (None, 1G, 10G) Figure...

Note: The default setting for Gigabyte Rounding is 1G. 11. Scroll to Quick Init and press Enter to enable to disable quick initialization of the virtual disk. A menu pops-up, as shown in Figure 8, and lists available options for quick initialization of the virtual disk. 12. Scroll the list, as shown...

Note: The default setting for Quick Init is Yes. 13. Scroll to VD Name and the Default name is cleared for a new name, as shown in Figure 9. Type a new name and press Enter to confirm the selection. Figure 9 VD Name UGT‐IS602R                                                                          ...

14. After configuring the virtual disk, scroll to Next , as shown in Figure 10. Press Enter to create the virtual disk. Figure 10 Create Virtual Disk UGT‐IS602R                                                                                  Page 14 

15. Please Y to select Yes , as shown in Figure 11, to confirm the creation of the virtual disk. The virtual disk is now listed in the Topology pane, as shown in Figure 12. Figure 11 Create Virtual Disk Confirmation UGT‐IS602R                                                                          ...

Figure 12 Virtual Disk in Topology Pane UGT‐IS602R                                                                                  Page 16 

UGT‐IS602R                                                                                  Page 17  Managing Virtual Disks This section contains the following topics: z Viewing Properties of Virtual Disk z Erasing RAID Configuration Data z Rebuilding Virtual Disk z Deleting Virtual Disk Viewing Pro...

Erasing RAID Configuration Data Note : The RAID controller stores RAID configuration data on all physical disks that are part of a virtual disk. RAID configuration data must be erased on the physical disk before it can be used with another virtual disk. 1. In the Topology pane, select Physical Disk ...

Figure 14 Erase RAID Configuration Data Rebuilding Virtual Disk Note : The 2+1 SATA 6G & PATA PCI-E COMBO HOST CARD WITH RAID BIOS supports manual rebuilding of RAID 1 virtual disks. The rebuild process is both initiated and complete in the BIOS. The Marvell RAID Utility (MRU), which runs in an ...

changed from Functional to Degrade , as shown in Figure 15. Figure 15 Virtual Disk Properties: Degrade VD 2. Replace the faulty physical disk with an identical physical disk. Note: If an identical disk is unavailable, use a replacement physical disk or larger size or one with a slightly smaller size...

3. In the Topology pane , scroll to Virtual Disks (VD 0: New_VD in Figure 17), and press Enter to select. A menu pops-up, as shown in Figure 17 Scroll to Rebuild and press Enter to configure the rebuild process. Figure 17 Rebuild Virtual Disk UGT‐IS602R                                               ...

4. Scroll through the list of free disk, as shown Figure 18, and press Space to select or unselect a replacement physical disk. Press Enter to continue. Figure 18 Select Replacement Disk UGT‐IS602R                                                                                  Page 22 

UGT‐IS602R                                                                                  Page 23  5. Press Y to select Yes , as shown in Figure 19, when prompted to confirm the rebuild process. Figure 19 Confirm Rebuild Virtual Disk

6. The status of the Rebuild process is reflected in the properties of the virtual disk, as shown in Figure 20. Figure 20 Rebuild Status To pause the rebuild process 1. In the Topology pane, scroll to the partially rebuild Virtual Disk . 2. Press Enter to view available operation on Virtual Disk . U...

UGT‐IS602R                                                                                  Page 25  To pause the rebuild process 1. In the Topology pane, scroll to the partially rebuild Virtual Disk . 2. Press Enter to view available operation on Virtual Disk . 3. Scroll to Resume and press Enter t...

Driver Installation Note: Driver can also be found and downloaded from our website at www.vantecusa.com For Windows® XP/Server 2003 UGT‐IS602R                                                                                  Page 26  For A New Installation A new installation requires a floppy disk fo...

UGT‐IS602R                                                                                  Page 27  below. 1. Follow Microsoft’s Windows installation procedure. 2. At the Windows Setup screen, press F6 to install the driver. 3. When prompted, press S to specify the location of the driver. 4. Insert...

UGT‐IS602R                                                                                  Page 29  below. 1. Follow Microsoft’s Windows installation procedure. 2. At the Windows Setup screen, press F6 to install the driver. 3. When prompted, press S to specify the location of the driver. 4. Insert...

UGT‐IS602R                                                                                  Page 31  3. Insert the CD driver bound with 2+1 SATA 6G & PATA PCI-E COMBO HOST CARD WITH RAID into your CD-ROM Drive, please select Marvell 91xx SATA 6G Controller ( D:\UGT-IS602R\XP_2003_Vista_2008_7\Fl...

UGT‐IS602R                                                                                  Page 34  3. Type D:\UGT-IS602R\XP_2003_Vista_2008_7\Setup.exe , click OK . (Change D:\ to match your CD-ROM drive letter) 4. Follow the on-screen instructions to complete the installation. 5. Restart Windows ...

UGT‐IS602R                                                                                  Page 35 

UGT‐IS602R                                                                                  Page 36  Warranty The 2+1 SATA 6G & PATA PCI-E COMBO HOST CARD WITH RAID comes with a 1 year limited warranty(90 day parts). If your unit becomes defective within that time frame, please go to www.vantecu...