Vantec MRK-300ST-BK - Manuals

Page 2 - Aluminum Mobile Rack

3-2 Aluminum Mobile Rack 3-1 Introduction ........................................................................ 3-3 Mobile Rack Features ................................................... 3-3 Unpacking Your Mobile Rack ........................................ 3-4 IDE Basics ........................

Page 3 - and reliable, the EZ-Swap 2 SATA is the ideal SATA mobile rack.

Aluminum Mobile Rack 3-3 3-1 Introduction The EZ-Swap 2 Serial ATA version is as convenient as mobile racks get. The EZ-Swap 2 SATA features the ability to directly connect your SATA hard drive without going through any additional circuits. Simply place the hard drive inside the cartridge, screw it ...

Page 4 - Unpacking Your Mobile Rack; representative immediately.; SATA Basics

3-4 Aluminum Mobile Rack Unpacking Your Mobile Rack Before installing the Mobile Rack, verify that the following items are included in the carton. If any parts are damaged or missing, please contact your local dealer or sales representative immediately. 1.One Mobile Rack Removable Docking Module 2.T...

Page 5 - -2 Hardware Installation; Mobile Rack Components; The Mobile Rack is comprised of two components:

Aluminum Mobile Rack 3-5 3-2 Hardware Installation The Aluminum Mobile Rack Docking Module is designed to install in any PC/AT or Pentium-class computer that has an available 5.25-inch half-height drive bay. General instructions for installing the Mobile Rack are given since the design of computer c...

Page 6 - Install the Mobile Rack Docking Case into the Drive Bay; Screws; Installing the Mobile Rack Docking Case; metal surface such as the computer case, if plugged in.

3-6 Aluminum Mobile Rack Install the Mobile Rack Docking Case into the Drive Bay Mounting Screws Mounting Screws Docking Case (All Models) Installing the Mobile Rack Docking Case 1. Turn OFF the power to your computer and any other connected peripheral devices. Follow the precautions for static elec...

Page 7 - ‘D’ shaped to ensure proper orientation when making the connection.; Mounting a Drive in the Drive Case; then sliding the cover towards the back of the unit.

Aluminum Mobile Rack 3-7 10. Replace the computer’s cover and reconnect the power and other external cabling. 7. Position the docking case so its mounting holes align with the drive bay’s mounting holes. Secure with the supplied mounting screws (two/four on each side.) 8. Attach the red SATA cable f...

Page 8 - Install the Drive in Drive Case

3-8 Aluminum Mobile Rack Install the Drive in Drive Case Mounting Screws Mounting Screws 4. Slide the drive case cover back on and secure with the two mounting screws. 2. Carefully position the drive inside the drive case.3. Secure the drive in place using the supplied mounting screws. Use the mount...

Page 9 - To insert the Mobile Rack drive case:; right; To remove the Mobile Rack drive case:; left; WARNING; -3 Using the Mobile Rack

Aluminum Mobile Rack 3-9 To insert the Mobile Rack drive case: 1.Insert the Mobile Rack drive case (with drive installed) into the installed Mobile Rack docking case and push ﬁrmly until the drive is seated. 2.Insert the key and turn it right to lock. The LED on the Mobile Rack should light after a ...

Page 10 - while data was still being written to the hard drive.

3-10 Aluminum Mobile Rack 3-4 Troubleshooting Q. I installed the EZ-Swap 2 but my computer does not detect the hard drive in it.A. Be sure to turn on the EZ-Swap 2 by setting the Key-Lock in the Lock position. The EZ-Swap 2 will not turn on unless it is locked. If you are using a brand new drive, ma...