Vantec 400 - Manuals

4 System Requirements / Parts Layout 3. System Requirements / Parts Layout : FireWire 800(1394b) Ports FireWire 800(1394b) Ports FireWire 400(1394a) Port Parts Layout: PC Users Mac Users Gold contact pins • Mac G3 processor & greater • Mac OS V10.4 or higher • 128MB RAM or higher • PCI slot that...

4.1. Hardware Installation : PC Users (1) Turn off your computer and disconnect all external peripheral devices and cables, i.e. power cord, network cable, monitor, etc. (2) Remove your computer’s cover. For most standard PC’s, there are screws that will need to be unseated before you can remove the...

7 Installation 4. Installation : (1) Turn off your computer and disconnect all external peripheral devices and cables, i.e. power cord, network cable monitor, etc. (2) Remove your computer’s cover by pulling the latch on the side, and gently lower the side of the computer onto a flat, non-abrasive s...

9 Installation 4. Installation : (4) Find the driver located in the directory within the CD-ROM and press "Next". ( Figure 4.2-D ) (5) After the installation ,click “Next” again, and then “Finish” . ( Figure 4.2-E ) No driver installation is required for Macintosh OS V10.4 and higher. Your V...

10 Warranty / Contact 5. Warranty / Contact : The Fire Wire800/400 comes with a 1 year limited warranty ( 90 day parts ) . If your unit should become defective within that time frame, please go to http://www.vantecusa.com for information on how to receive warranty exchange or repair. Cosmetic defect...