Uniden BT230 - Manuals

5 Tone Meaning 2 Rising Beeps Active call 2 Falling Beeps Ending a Call Short Beeps Successfully paired with a mobile phone what the Buttons do The headset initiates the function only after the button is released. Press it to Press & hold it for 2 seconds to 4 seconds to Multifunction button ( M...

Press it to Press & hold it for 2 seconds to 4 seconds to Volume Up During a call: Increase the call volume. NA During a call-waiting call: Put the active call on hold and switch to the waiting call. Volume Down During a call: Decrease the call volume. NA NA seTTinG Up YoUr HeadseT Charge the Ba...

When the battery needs to be recharged, you will hear warning beeps every 0 seconds and see the red LED (depending on your headset status). NOTE: Use ONLY the AC adapter supplied with the headset. Using any other adapter could damage your headset, create a fire hazard, or cause a risk of electric sh...

Your phone should discover a device called a BT230 or BT230 headset , When your phone asks if you want to pair with this device, select yes. When your phone prompts you for a PIN code or password to pair with the BT20, enter 0000 . NOTE: If your phone supports Bluetooth 2.1, you do not need to enter...

If the headset loses the connection for more than 0 seconds (e.g., if your phone is out of range), it goes into idle mode. To manually reconnect, press MFB once. If the headset comes back in range in less than 0 seconds, it will automatically reconnect without pressing MFB. UsinG YoUr HeadseT Turnin...

10 comes in loud and clear. Move the headset around until you find the best angle for the ear cushion. wearing the Headset on Your Left ear If you want to wear the headset on your left ear, take the earhook off and turn it over. FeaTUres Basic After the headset is connected, you can use the followin...

11 Transfer a call Press and hold MFB for 2 seconds to transfer the current call from your phone to headset (and back). Redial the last number With the phone in standby, press MFB . The headset automatically dials the last number you dialed from your phone. Call waiting To use this feature, you must...

12 To deactivate voice dialing, press and hold MFB until you hear a beep (about 2 seconds). NOTE: If you are in Voice Activated Dialing mode and you activate Last Number Redial, Voice- Activated Dialing turns off and the last number is dialed.Use your pre-programmed voice commands as you would with ...

1 Only one phone at a time can be on an active call.The headset plays a different ring tone for each phone so you know which one is ringing. To answer the incoming call, press MFB as usual. All the button functions remain the same for the first phone (the one you paired first). To use last number re...

1 If... Try... The headset paired with my phone, but I can’t hear anything through it. Making sure the call connected and is still active. Making sure the phone transferred the call to the headset. Press and hold MFB for two seconds to transfer the call. • • The headset keeps beeping, and I don’t kn...

If the noise continues, there may be interference on your phone itself, and any noise in the phone’s connection will come through on the headset, too. Transfer the call to your phone and see if the audio quality improves. If it doesn’t, look around for things that can interfere with your phone. Safe...

When using the headset, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming poo...

iNduStry caNada StatemeNt This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesir...