Uniden 416 - Manuals

Main Unit Four TelephoneLine Cords AC Adaptor User’s Manual The following are the components included when you purchase Uniden’s UPBX416.Should any of the above items be missing, please contact the sales office where it waspurchased. Included in your UPBX416 Package Standard extras include: - Disket...

INST ALLA TION Steps for Setting Up INSTALLATION Plug In Telephone Lines and Extns. Do you want to change System OGMs? Do you want to assign all 4 C.O. Lines for telephone call? Set Time and Date (see Page 8) FINISH YES NO NO YES See page7 ‘Disable Unused C.O. Lines’ See page 9 ‘Recording System OGM...

To set the features with , put the mode switch in the set-up mode at the right. Aftersetting all the features, put the mode switch on the : Business-Hour Mode or :Off-Hour Mode. Assigning C.O. Lines By assigning C.O. Lines you can maximise the usage of the UPBX416.There are several options depending...

1. All OGMs can be played in the Auto-Attendant Mode (Default Setting). 2. Attendant Mode is used when all incomingcalls need to be received bythe person at station 200without any system OGMs. 3. See page 27 “Attendant Selection” to set theAttendant Mode to receiveall incoming calls at station200. O...

12 2. Set the MODE Switch on the right side of the unit to Set-Up Mode . 3. Lift the handset connected to Ext. 200 - the dial tone is heard in the receiver. 4. Press to enter the feature. 5. Press to select the external audio input (two short dial tones confirm) - or - Press to select the internal m...

You can set up several services from the UPBX416 which can be accessed when you areout of the office. This feature is used in the Auto-Attendant Mode. Receiving messages Messages can be left in your voice mail box if you set your station in the unattendedmode. You can check your voice mail box in th...

When a busy extension becomes available, the system is able to notify your extension. (See page 19 ‘Extension/C.O. Line Callback’) Intercom Call Intercom calls at the extension can be made by simply dialling the extension number. Operation: 1. Lift the handset - the dial tone is heard in the receive...

Last Number Redial The telephone number you just called is stored in the system memory, and can be redialled. Operation: 1. Lift the handset - the dial tone is heard in the receiver. 2. Press - to get into this feature. 3. The last number is redialled. Call Hold This feature allows you to put your f...

Call Forwarding to Extension Number When you step out of the office, you can forward an incoming call to a designated extensionnumber. Operation: To SET: 1. Lift the handset - the dial tone is heard in the receiver. 2. Press to get into this feature. 3. Press extension number to enter a station numb...

Extension Memory Dial Input/Out Each extension can store 10 personal memory dials by using the Station Memory Dial Operation: To INPUT Extension Memory Dial No. 1. Lift the handset 2. Press to input Memory Dial. 3. Press the two digit Memory Dial No. e.g. 4. Press telephone number; e.g. 1 2 3 4 5 6 ...

Setting the Off-Hour mode An alternate recorded message can be played during off- hours, weekends, and holidays.OGM 6 is played instead of OGM1. In the Off Hour Mode you can receive messagesor get urgent calls forwarded to you by using the Call Notification and Call ForwardingOutside features. Refer...

Setting the Business-Hour mode (Default setting) The recorded message greets callers during business hours and guides them through thesystem menu. The caller may choose to be routed to any of the 16 available local extensions,or remote extensions. Callers are prompted to make their choices using a t...

Selection of Attendant mode gives three ways of connecting incoming calls to extensions. 1. Auto- Attendant Mode: UPBX416 will answer the call from outside and a caller will hear system OGM (1 or 8).2. Attendant Mode: An operator answers all the incoming calls in this mode at Ext.200. 3. Multi-Atten...

Multi-Attendant Mode To set the Multi-Attendant Mode from the Auto-Attendant or Attendant mode Operation: 1. Assign the extensions to the corresponding C.O lines (see page 40 ‘C.O. Ring Assignment’. 2. Set the MODE Switch on the right side of the unit to Set-Up Mode 3. Lift the handset connected to ...

Class Of Service (COS) Code Restriction This feature allows you to enter or remove the first four digits of restricted telephonenumbers using COS codes. You can have three codes, and they need to be registered ateach extension to function. The first 4 digits entered will block outgoing calls. Operat...