Turbosound TCS SERIES USER - Manuals

u s e r m a n u a l TCS series tcs manual page 7 Product Range Summary The TCS-20 is a compact passive 2-way wide dispersion loudspeaker using two 5” LF drivers and a 1” neodymium soft dome HF tweeter for use in background and surround sound applications ranging from multimedia and audio visual to r...

u s e r m a n u a l TCS series tcs manual page 10 System Requirements TCS series 2-way enclosures are passive loudspeaker systems. This means that they require only one amplifier channel for correct operation, the frequency splitting between the low frequency driver and the high frequency driver bei...

u s e r m a n u a l TCS series tcs manual page 11 System Configurations Many different system configurations of TCS series loudspeaker enclosures are possible to suit various installation requirements, ranging from cafes, bars and restaurants to theme parks, theatres and houses of worship. Listed be...

u s e r m a n u a l TCS series tcs manual page 13 LMS-D6 LOUDSPEAKER MANAGEMENT SYSTEM The LMS-D6 is a compact and powerful DSP based audio-processing unit, ideally suited for fixed installation applications, where it combines the functions of multiple conventional products in a compact 1U high unit...

u s e r m a n u a l TCS series tcs manual page 14 Loudspeaker Connections TCS series enclosures are provided with a recessed connector panel housing a single Neutrik Speakon NL4MP connector wired in parallel with a 4-way terminal strip, or in the case of the TCS-12M and TCS-15M wedge monitors via tw...

u s e r m a n u a l TCS series tcs manual page 15 Connecting Cables Heavy duty loudspeaker cable should always be used, with a minimum wire size of 12 gauge (1.5mm 2 ), and preferably 10 gauge (2.5mm 2 ) for longer runs, keeping the run as short as possible. This helps to avoid wasting amplifier pow...

u s e r m a n u a l TCS series tcs manual page 16 FLYING AND LIFTING General A versatile set of rigging parts has been designed for arrayable TCS series enclosures in order to give the installer a cost effective approach to flying and mounting, ranging from a single enclosure up to multi-box arrays ...

u s e r m a n u a l TCS series tcs manual page 17 Flying single enclosures Single enclosures may be flown using a variety of different methods: ♦ Standard eyebolts (available from Turbosound or third party suppliers) attached to the rigging points provided on the top and back of the cabinet. The rig...

u s e r m a n u a l TCS series tcs manual page 20 Installation of a single TCS series enclosure using eyebolts Parts required: 3 x M10 x 36mm shoulder eyebolts 3 x flat washers 3 x spring washers 1. Remove the captive countersunk bolts from the top and the rear of the cabinet using a flat blade scre...

u s e r m a n u a l TCS series tcs manual page 21 Installation of a single TCS series enclosure using WB-10, WB-20, W-55, CB-10, CB-55 wall and ceiling brackets Parts required: Turbosound wall or ceiling brackets as appropriate 4 x M10 x 36mm hex head bolts 4 x flat washers 4 x spring washers 1. Ens...

u s e r m a n u a l TCS series tcs manual page 23 • TP-55/2 2-way flying assembly top plate and a BP-55/2 2-way flying assembly bottom plate. It is used to connect two TCS-56/59 enclosures together with a splay angle between cabinets of up to 30º in increments of 5º TP-55/2 BP-55/2 • TP-55/3 3-way f...

u s e r m a n u a l TCS series tcs manual page 24 Rigging Instructions for a 2-wide TCS-56/59 array Parts required: 2 x TCS-56 or TCS-59 enclosures 1 x TP-55/2 flying assembly top plate 1 x BP-55/2 flying assembly bottom plate 4 x M10 x 36mm shoulder eyebolts 4 x M10 x 36mm hex head bolts 8 x flat w...

u s e r m a n u a l TCS series tcs manual page 26 Rigging the TCS-40 with 3-wide TCS-56/59 arrays Parts required: 3 x TCS-56 or TCS-59 enclosures 1 x TCS-40 enclosure 1 x TP-55/3 flying assembly top plate 1 x SB-40 swivel bracket 4 x M10 x 36mm shoulder eyebolts 6 x M10 x 36mm hex head bolts 8 x fla...

u s e r m a n u a l TCS series tcs manual page 27 APPENDIX A Technical Specifications TCS- 59 700mm x 370m x 389mm ( 27.6” x 14.6” x 15.3”) 22 kg (4 8. 4l bs ) 12” LF, 1” H F 60 H z – 2 0kHz ± 4d B 90 ° H x 6 0 ° V 290 wa tts rm s 58 0 w atts pr ogr am 72 5 w atts peak 97d B , 1W @ 1m 13 1dB peak 8 ...

u s e r m a n u a l TCS series tcs manual page 29 APPENDIX B: WARRANTY Limited Warranty This Turbosound loudspeaker product is warranted to the original end-user purchaser and all subsequent owners for a period of two (2) years from the original date of purchase. Warranty Coverage Warranty coverage ...

u s e r m a n u a l TCS series tcs manual page 30 Incidental and consequential damages Turbosound's liability is limited to the repair or replacement, at our option, of any defective product, and shall not be liable for any incidental and consequential damages including, without limitation, injury t...

u s e r m a n u a l TCS series tcs manual page 31 APPENDIX C Use of thread locking compounds When assembling flying hardware to TCS series loudspeaker enclosures it is advisable to use thread-locking compounds to eyebolts and other bolts in order to avoid any possibility of loosening. The recommende...

u s e r m a n u a l TCS series tcs manual page 32 Notes