Turbosound Impact 50 - Manual

Page 2 - u s e r m a n u a l; Impact 50 manual; CONTENTS

u s e r m a n u a l Impact 50 Impact 50 manual page 2 CONTENTS Introduction ................................................................................................................. 3 Thanks ........................................................................................................

Page 3 - INTRODUCTION; forward to helping you in the near future.; Unpacking the Impact 50 loudspeaker; A range of colour options includes TurboBlue

u s e r m a n u a l Impact 50 Impact 50 manual page 3 INTRODUCTION Thanks Thank you for choosing a TURBOSOUND IMPACT 50 series loudspeaker productfor your application. Please spare a little time to digest the contents of thismanual, so that you can obtain the best possible performance from this unit...

Page 4 - PRODUCT DESCRIPTION; The Impact 50S; SYSTEM REQUIREMENTS

u s e r m a n u a l Impact 50 Impact 50 manual page 4 PRODUCT DESCRIPTION The Impact 50 is an ultra-compact passive sound reinforcement loudspeakerdesigned for applications wherever a very small enclosure is required toreproduce sound. The Impact 50 drive units are a 5” high efficiency low/midtransd...

Page 5 - AMPLIFIER CONSIDERATIONS; RECOMMENDED AMPLIFIER POWER RATINGS:; LOUDSPEAKER CONNECTIONS

u s e r m a n u a l Impact 50 Impact 50 manual page 5 AMPLIFIER CONSIDERATIONS Turbosound speaker enclosures should be driven by high quality poweramplifiers designed for professional use. Such amplifiers will have balancedinputs, DC and RF fault protection, and well designed cooling systems forreli...

Page 6 - TRANSFORMER TAP SETTINGS; damping factor; POSITIONING

u s e r m a n u a l Impact 50 Impact 50 manual page 6 TRANSFORMER TAP SETTINGS The constant voltage Impact 50T is fitted with a 4-way input connector. Alwaysconnect the speaker cable corresponding to the negative terminal on theamplifier to the blue terminal. The cable corresponding to the positive ...

Page 7 - Fixing to a wall or ceiling using the SB-50

u s e r m a n u a l Impact 50 Impact 50 manual page 7 ♦ Attaching to a scaffold bar or to amicrophone stand by means of the SM-50 SM-50 SM-50 SM-50 single point mount bracket. For microphonestand use simply remove the microphoneclip from the mic stand and locate thethreaded end through the hole in t...

Page 8 - MAINTENANCE

u s e r m a n u a l Impact 50 Impact 50 manual page 8 MAINTENANCE If either of the drive units in your IMPACT 50 cabinet should cease functioningand need a replacement, you are advised to remove the faulty unit from thecabinet and send it to a professional service centre authorised to recone andrepa...

Page 9 - APPENDIX A; Passive crossover network; Mounting Hardware; Single point mount

u s e r m a n u a l Impact 50 Impact 50 manual page 9 APPENDIX A Spares and Accessories LS-50 5” (127mm) low frequency driver TW-50 0.5” (14mm) high frequency tweeter PX-50 Passive crossover network MG-50 Metal grille Mounting Hardware WB-50 Adjustable wall bracket (supplied) SM-50 Single point moun...

Page 10 - APPENDIX B

u s e r m a n u a l Impact 50 Impact 50 manual page 10 APPENDIX B Technical Specifications IMPACT 50 IMPACT 50S IMPACT 50T Type 2-way passiveloudspeaker 2-way passiveloudspeaker 2-way passiveloudspeaker Components 5” LF, 0.5” HF tweeter 5” LF, 0.5” HF tweeter 5” LF, 0.5” HF tweeter Enclosure type Op...

Page 11 - APPENDIX C

u s e r m a n u a l Impact 50 Impact 50 manual page 11 APPENDIX C Limited Warranty This Turbosound loudspeaker product is warranted to the original end-userpurchaser and all subsequent owners for a period of two (2) years from theoriginal date of purchase. Warranty Coverage Warranty Coverage Warrant...

Turbosound Impact 50 - Manual

Table of Contents:

Summary

Other Turbosound Models