TRENDNet TVIP572W - Manuals

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 3 Side Panel View  Reset Button – Use an item such as a paperclip to push and hold this button for 3 seconds and release to reset your camera to its factory defaults.  WPS (Wi-Fi Protected Setup) – Push an...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 4 Camera Stand  Metal Stand- This base allows the camera to stand upright.  Adjustable Arm- Screw the arm through the metal stand hole. Use the adjustable screw to turn it up or down.  Washer- Place the w...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 5 Installation Wired Connection 1. Connect the Ethernet Cable If you intend to use the network camera as a wired device, connect one end of the included Ethernet cable into the Ethernet port on the rear pane...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 6 Starting the Setup Wizard Insert the included CD-ROM into your CD/DVD drive. The Install Wizard program will run automatically. Note: If the Install Wizard does not run, you may have autorun disabled on yo...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 7 4. Login to your camera by entering the ID and Password. By default, both the ID and Password are set to admin . Click Next to continue. 5. Enter a name for the camera in the Camera Name field. The name wi...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 8 8. Select whether you want to use the camera over an wireless connection or on a wired connection. Click No, I don’t want to use wireless for the camera. Then click Next to continue. (skip to step 12 for w...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 11 Configuration After completing the Setup Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility is designed to allow you to easily access and configure your TV-IP572W or...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 12 Setup Wizard To view the Setup Wizard settings: 1. Login to the camera as described in the section Using the web-based configuration interface. Click on the Setup tab on the left panel. 2. Click Wizard. T...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 15 Step 6: Setup Complete This screen provides Configuration Settings . The final screen shows the information you have just configured. Click Back to make changes, Apply to set the changes and Cancel to exi...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 20 Video and Audio This screen shows different video profiles where you can setup different functions for the camera. The audio settings also allow for different settings. Each profile coincides with the pro...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 22 Action Recording This screen shows the SD Card parameters. You are able to set the recording options on this page. Click the Recording checkbox to enable camera recording. All data is stored on the remova...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 27 Motion Detection These settings control the motion detection settings on the camera. Motion detection allows you to designate an area in the cameras viewing angle to capture motion within that area. All o...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 28 Tools System These settings allow you to save the recorded data to your local hard drive or retrieve it from the drive. When you click the Save Configuration button it saves a database file to your local ...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 29 Advanced Device Info These settings display theDevice information to you. It comprises of all the important details regarding the phones network settings. The description is laid out in the picture below....

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 30 How to setup/access the camera remotely You can either setup the Dynamic DNS connection via camera itself or your home router. An account from any of the listed DDNS providers is required prior to this op...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 33 Technical Specifications TV-IP572W Camera General Sensor: 1/4” CMOS Sensor Board Lens Focal Length: 4mm F/No: 1.5 Minimum illumination: 1 lux Focus Depth: 20 cm ~ infinity View: Horizontal: 51.8 degrees V...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 37 Troubleshooting 1. The Power LED and Ethernet Activity LED do not light up. The power supply or camera might be faulty. Check that the connection to both the power source and the terminal on the back of t...

© Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TV-IP572W / TV-IP572WI 38 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits ...

© Copyright 2013 TRENDnet. All Rights Reserved. 40 TRENDnet User’s Guide Limited Warranty Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TV-IP572W / TV-IP572WI – 3...