TRENDNet TVIP522P - Manuals

vi TV-IP522P ProView Megapixel Internet Camera Default Settings Use the default settings to access the web-based management software and live video display. Default configuration settings Username This is the Username you will be prompted to enter when you access the TV-IP522P configuration screens ...

TV-IP522P ProView Megapixel Internet Camera 7 1 Introduction The TV-IP522P ProView Megapixel Internet Camera transmits live real-time high-quality M-JPEG/ MPEG-4/H.264 video through an Ethernet network useful for remote monitoring applications. The live video can be viewed remotely and managed throu...

8 TV-IP522P ProView Megapixel Internet Camera Camera Hardware Components Below is a summary description of the camera hardware: Front and Side Components Lens comes with 2 parts that’s adjustable, Focus (front) and Aperture (back). Please adjust the aperture first then the focus. Audio mic Adjustabl...

9 TV-IP522P ProView Megapixel Internet Camera Rear Panel Components The power connection to the camera when fitted with the Infrared lens is split between the camera body and lens using the power connection adapter cable attached to the infrared lens. All other cables connect to the camera at the re...

11 TV-IP522P ProView Megapixel Internet Camera 2 Installing the Camera The camera should be attached to the stand included in the package. The camera stand can be mounted on a flat surface using the three screw holes on the base of the stand. The camera is intended for indoor use. The camera, the po...

12 TV-IP522P ProView Megapixel Internet Camera Connect Ethernet Cable To connect the camera to your network, connect a Category 5 or better Ethernet cable to the network cable connector located on the camera’s left side panel, and then attach it to the network. The Ethernet port will automatically d...

13 TV-IP522P ProView Megapixel Internet Camera Reset Camera A manual reset can be conducted by following the procedure below. The reset button is located on the rear panel of the camera. To reset the system settings to factory defaults, please follow these steps: 1. Leave the camera powered on, do n...

14 TV-IP522P ProView Megapixel Internet Camera SD Card Slot The built in SD card slot allows you to insert Secure Digital Cards. This enables images taken by the camera to be saved to an external SD card. SD Card Slot

15 TV-IP522P ProView Megapixel Internet Camera 3 SetupWizard This section describes the how to setup a camera using the SetupWizard. To install the SetupWizard on a system running Windows, launch the SetupWizard on the installation CD-ROM and follow the setup instructions. Once the software is insta...

16 TV-IP522P ProView Megapixel Internet Camera SetupWizard- Select Your Camera The following screen appears showing the cameras that have been found on your network: • Click on the camera you want to configure. • Click Next to continue.

17 TV-IP522P ProView Megapixel Internet Camera SetupWizard- Authentication On the following screen type in the ID and Password that you will use to configuring the camera settings: • Type a User ID in the ID field. • Type the password of the User in the Password field. • Click Next to continue.

18 TV-IP522P ProView Megapixel Internet Camera SetupWizard- Change Password The following screen allows you to change the default admin password: Carry out the following if you want to change the admin password: • Tick the Change Password checkbox • Type in a New Password in the New Password field a...

19 TV-IP522P ProView Megapixel Internet Camera SetupWizard- Select a Connection Option The following window allows you to specify the connection method used by your camera network. Click the radio button of the network environment your camera is connected to. The available options are: • PPPoE • DHC...

20 TV-IP522P ProView Megapixel Internet Camera SetupWizard- Select a Connection Option- PPPoE If your connection method is PPPoE, click the PPPoE radio button and click Next : The following window appears: • Type the User Name used to connect to your PPPoE connection in the User Name field. • Type t...

21 TV-IP522P ProView Megapixel Internet Camera SetupWizard- Select a Connection Option- DHCP If your connection method is DHCP, click the DHCP radio button and click Next :

22 TV-IP522P ProView Megapixel Internet Camera SetupWizard- Select a Connection Option- Fixed IP If your connection method is Fixed IP, click the Fixed IP radio button: The following window appears: • Type in the IP Address, Subnet Mask, Default Gateway, Primary DNS Server IP address and Secondary D...

23 TV-IP522P ProView Megapixel Internet Camera SetupWizard- Other Settings The following window allows you to configure additional camera settings: • Type a name to help you identify the camera in the Camera Name field. • Set the camera date and time from the Camera Time drop-down menus. To use the ...

24 TV-IP522P ProView Megapixel Internet Camera SetupWizard- Setting Up The Camera The following window appears, summarizing the network settings of your camera: • When you have finished setting up the Camera click the Next button. To make any changes to your Camera settings, click the Previous butto...

25 TV-IP522P ProView Megapixel Internet Camera SetupWizard- Complete After the camera has restarted, the following window will appear: • Click the hyper-link to connect to the camera web interface. • If you want to setup an additional camera, click the Setup Another Camera button. • When you have fi...

26 TV-IP522P ProView Megapixel Internet Camera 4 Using the Camera Web Manager The camera is easy to use and manage. Use a normal web browser to access the camera’s live video display, as well as the configuration software. It is recommended to check and make sure the computer can access and use the ...

27 TV-IP522P ProView Megapixel Internet Camera Login To access the web manager directly from a computer or on a network without a DHCP server running, use the default IP address of the camera in the browser address entry to access the web manager. Type http://192.168.10.30 in the address bar and pre...

28 TV-IP522P ProView Megapixel Internet Camera Live Video Display User Interface The web manager’s live video page presents icons at the bottom used to change the display size, control snapshot and recording of video and audio controls. Links to other management menus are located at the top right po...

30 TV-IP522P ProView Megapixel Internet Camera Camera Setup Click the Setup link to view the menus in the Setup Menu directory. These menus are used to configure network settings, video and other settings for the camera. SetupWizard menu in Setup directory To configure the camera with the web manage...

31 TV-IP522P ProView Megapixel Internet Camera System Configuration The System configuration menus include the Device Management menu and Time and Date. Device Management Admin Password Setting Device Management menu Use this section to change the Admin Password for the camera. Type in a New Passwor...

32 TV-IP522P ProView Megapixel Internet Camera Add User Account Use this section to add a new user. Up to 20 User accounts can be created on the TV-IP522P camera. To create a new user, carry out the following: • Type a name for the new user in the User Name field. • Type in a new password in the New...

34 TV-IP522P ProView Megapixel Internet Camera Automatic time configuration • Click a radio button to specify the method used to set the time on the TV-IP522P. Synchronize with NTP Server • Click this radio button to specify that the TV-IP522P should be synchronized with an NTP Server. • Type the NT...

35 TV-IP522P ProView Megapixel Internet Camera Network Settings To Network menu contains two sub-menus that provide the Networking Settings for the camera, such as the IP Setting, and DDNS Setting LAN IP Settings Network Setup menus The camera’s IP settings can be configured as a DHCP client to obta...

37 TV-IP522P ProView Megapixel Internet Camera Setting up Video & Audio The Video & Audio menu contains two sub-menus that provide the video and audio Settings for the camera and Use the Image Setup configuration to optimize the live video display. Brightness Adjust the brightness level. The...

38 TV-IP522P ProView Megapixel Internet Camera Mirror Use this to produce a mirror image display. This is used with the Flip option if the camera is mounted in a hanging position, as from a ceiling. Reset to Default Click this button to reset the TV-IP522P Image Settings back to factory defaults. Vi...

40 TV-IP522P ProView Megapixel Internet Camera Action The Action menu contains four sub-menus that provide the Recording, Snapshot, Digital output and RS-485 setting. Recording The Recording Setup menu is used to determine when and how digital video recordings are handled. Recordings can be saved to...

41 TV-IP522P ProView Megapixel Internet Camera Snapshot Preferences The Trigger menu is used to determine when and how recorded digital images from snapshots are handled. Use motion detection to trigger a snapshot and email it to the account configured here. Alternatively, the images can be sent to ...

42 TV-IP522P ProView Megapixel Internet Camera Select the FTP Server checkbox to specify that the images will be sent to an FTP Server. Configure the parameters as described below: • User Name- Type the User Name of your FTP account. • Password- Type the password for your FTP account. • Host Name- T...

43 TV-IP522P ProView Megapixel Internet Camera RS-485 RS-485 control is used to enable use of external devices (such as motorized rotational or pan and tilt camera stand) operated through the I/O port. Note: 485+/- of the I/O connector are used for RS-485. Refer to the manufacturer’s user manual for...

44 TV-IP522P ProView Megapixel Internet Camera Motion Detection Motion detection is used to trigger video recording when motion is detected in a designated portion of the video display. To designate a portion of the display used for motion detection, choose the Draw motion area option and use the mo...

45 TV-IP522P ProView Megapixel Internet Camera Tool The Tool menu contains two sub-menus that provide the Backup and Restore and Firmware upgrade. Back Up and Restore Camera Settings Save System Settings/Restore/Reboot menu Save To Local Hard Drive To save configuration settings for the camera to a ...

46 TV-IP522P ProView Megapixel Internet Camera Firmware Upgrade To upgrade the camera firmware, make sure the correct firmware file is located on your computer. Click the Browse button to locate the file. After locating the file, click the Upload button to load the file. It will take several seconds...

47 TV-IP522P ProView Megapixel Internet Camera Device Information Network information, MAC address and firmware version is displayed in the Device Information display. Device Information display Log Click the Log link to view the camera’s current log. To save the log in simple text form on your comp...

48 TV-IP522P ProView Megapixel Internet Camera 5 IPView Pro 2.0 This section describes the how to setup a camera using the IPView Pro 2.0 camera monitoring software. To install IPView Pro 2.0 on a system running Windows, launch the IPView Pro 2.0 installation software on the installation CD-ROM and ...

49 TV-IP522P ProView Megapixel Internet Camera Add a camera for monitoring The Add camera menu is presented the first time the IPView Pro 2.0 software is launched. This menu is used to add cameras to the user interface for monitoring. After the first time running the software, this menu can be acces...

51 TV-IP522P ProView Megapixel Internet Camera IPView Pro 2.0 User Interface Below is a general description of the user interface. 2 1 3 4 5 6 7 8 NO. Item Description 1 Live video display area Display area for single or multiple cameras of live video. Right click on any display area to view a list ...

52 TV-IP522P ProView Megapixel Internet Camera Display Controls The primary display and IPView Pro 2.0 control icons are described in detail below. When there are more than one camera displays viewed, one of the displays can be selected for management or additional changes. Simply left click on any ...

54 TV-IP522P ProView Megapixel Internet Camera Camera configuration with IPView Pro 2.0 Access the camera configuration menus by clicking on the gear icon at the bottom of the right hand panel of the IPView Pro 2.0 user interface. Configuration options include adding and deleting cameras from the di...

55 TV-IP522P ProView Megapixel Internet Camera 2. Select the camera to add from the list, enter the administrator’s user name ( ID: ) and password, a preview of the live video display will appear. Click the OK, add this camera button, a confirmation message informs when the camera is connected and a...

TV-IP522P ProView Megapixel Internet Camera Schedule Recording with IPView Pro 2.0 Use the Monitoring Settings menu to create schedules for recording and apply the schedules to any camera. Click the Monitoring Settings tab to view the Schedule Recording menu (the first menu viewed in the Camera Sett...

TV-IP522P ProView Megapixel Internet Camera 56 Setup Motion Detection and Digital Input with IPView Pro 2.0 The Monitoring Settings Camera Settings menus include Motion Detection setup and Digital Input control. Each menu has the schedule option to apply a schedule for the action taken or always tak...

TV-IP522P ProView Megapixel Internet Camera 57 IPView Pro 2.0 Recording Options The Recording Options configured in the IPView Pro 2.0 help to conserve and manage allowed memory storage (disk space) and for video file management. Recorded files can be limited by time elapsed or by size. Use the sele...

TV-IP522P ProView Megapixel Internet Camera 58 IPView Pro 2.0 Miscellaneous Options The Other Options available for configuration include Proxy server setup, email notification, scan interval and alert type settings. If you are using a SSL email account(eg. Gmail) to send the images; please select S...

TV-IP522P ProView Megapixel Internet Camera 59 6 Playing Video Files on a Computer IPCamPlayer software is installed on the monitoring station or administrator’s system along with the IPView Pro 2.0 monitoring software. Use it to playback and manage recorded video from the cameras added to the IPVie...

TV-IP522P ProView Megapixel Internet Camera 60 Load Saved Video Files Each camera has a file created automatically for storing video files. These files are normally located in the My Documents folder in Windows. The file folders are named according to the IP address and camera model. For example, 19...

TV-IP522P ProView Megapixel Internet Camera 61 To view recorded video files in the IPCamPlayer, it is first necessary to locate and select the files to be viewed and add them to the list. Click the Search Files button in the IPCamPlayer main interface and a new menu appears. In the new menu, use the...

TV-IP522P ProView Megapixel Internet Camera 62 ffdshow The ffdshow software is used for audio and video encoding and decoding, especially for MPEG-4 formats. It is free software used on Windows systems and enables the user to tweak media playback and select specific codecs and formats. For use with ...

TV-IP522P ProView Megapixel Internet Camera 63 3. The InstallShield Wizard will appear, click Next in the welcome screen. 4. Accept the default location (Windows Programs folder) on the system for placement or Browse to choose an alternative, Click Next to continue.

TV-IP522P ProView Megapixel Internet Camera 64 5. Click to check the components that will be installed. For IPCamPlayer it is only necessary to use the default components already selected. Click Next to continue. 6. Accept the default destination folder (ffdshow) or Browse to choose an alternative, ...

TV-IP522P ProView Megapixel Internet Camera 65 7. Click to check the additional tasks that will be installed. For IPCamPlayer it is only necessary to use the default formats already selected. Click Next to continue. 8. Click to check the video applications that use ffdshow. For IPCamPlayer it is onl...

TV-IP522P ProView Megapixel Internet Camera 67 11. Review the information and click Install if satisfied that it is correct to install the necessary codecs. The installation will take a few seconds. 12. If desired, any of the three configuration utilities included with the ffdshow installation can b...

TV-IP522P ProView Megapixel Internet Camera 68 A Technical Specifications Camera   General    Sensor:   1/2.5”   color   CMOS   image   sensor   Sensor   Resolution:   2592(H)   x   1944   (V)   Lens:   1/2”   CS ‐ Mount,   replaceable   Focal   Length:   4mm   F/No:   F1.4    Sensor   Sensitivity: ...

TV-IP522P ProView Megapixel Internet Camera 71 B I/O Terminal Application Typically used in association with programming scripts for developing applications for motion detection, event triggering, alarm notification via e-mail, and a variety of external control functions. The 8-pin I/O Terminal Bloc...

TV-IP522P ProView Megapixel Internet Camera 72 Interface Schematic 1. Output device (load) is driven by external power supply. DO- DO+ AC/ DC Load 2. Input device (active control device) has independent power supply. DI+ DI- 3. RS-485 Interface. RS-485+ RS-485- RS485_A RS485_B Swivel stand

TV-IP522P ProView Megapixel Internet Camera 73 Limited   Warranty     TRENDnet   warrants   its   products   against   defects   in   material   and   workmanship,   under   normal   use   and   service,   for   the   following   lengths   of   time   from   the   date   of   purchase.              ...

TV-IP522P ProView Megapixel Internet Camera 74    CUSTOMER’S   OR   ANY   THIRD   PERSON’S   MISUSE,   NEGLECT,   IMPROPER   INSTALLATION   OR   TESTING,   UNAUTHORIZED   ATTEMPTS   TO   REPAIR   OR   MODIFY,   OR   ANY   OTHER   CAUSE   BEYOND   THE   RANGE   OF   THE   INTENDED   USE,   OR   BY   ...

TV-IP522P PoE Internet Camera Server with 2-way Audio 75