TRENDNet TK-210K - Manuals - manualsarea.com

Page 2 - Table of Contents

Table of Contents English ...................................................................................................... Troubleshooting ........................................................................................ 1 1 24 7 1. Before You Start2. How to Install .......................

Page 3 - Package Contents; Before You Start

System Requirements Application TK-2102 Sets of KVM Cables2 Sets of USB Cables2 Sets of Audio CablesStand VGA or SVGA Compatible MonitorMicrophone and Speaker (optional)Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, or Mac OS Package Contents 1. Before You Start English 1 Microphone 2-Port USB an...

Page 4 - Turn off both computers and their; Turn; ON; the first computer and

1. Turn off both computers and their peripherals, and disconnect all power cords. 3. Connect the shared PS/2 keyboard, monitor, and PS/2 mouse into the KVM Switch's console port . 4. Use the provided KVM and audio cables to connect your PC to the KVM Switch. 2. How to Install English 2 2. Connect th...

Page 5 - Your installation is now complete.; the second computer and; Register Your Product

6. Press the face panel button on the KVM Switch to select the second computer. Your installation is now complete. English 3 PC 2 7. Turn ON the second computer and wait until startup completes. Register Your Product To ensure the highest level of customer service and support, please take a moment t...

Page 6 - A keyboard hot key command consists of three keystrokes:; Hot-Key Command Sequence

Note: For PC switching, you can use the face-panel buttons of the KVM Switch, or a hot-key command sequence via keyboard. A keyboard hot key command consists of three keystrokes: Hot Key command = ScrLk + ScrLk + Command key(s) After pressing the ScrLk key, you have 2 seconds to press the ScrLk key ...

Page 7 - commands to reset the mouse setting.

Note:1. Hot key command works on top row numbers keys only. 2. A PS/2 Keyboard is required for proper hot key function. If you use a USB keyboard, hotkey feature is disabled. 3. When the binding of PC, USB Hub & Audio/Mic port switching is enabled by the hotkey sequence, any PC, USB Hub and Audi...

Page 8 - Quick Reference Sheet for TK-210

English 6 Command Hot-Keys Description Front-Panel Buttons Quick Reference Sheet for TK-210 Select PC Select Hub Port Next higher channel Bind PC & Hub Port Switching Beep Sound On/Off UnBind PC & Hub Port Switching Autoscan Next lower channel Stop Autoscan ScrLk ScrLk X + + (x is a top-row ...

Page 9 - Troubleshooting

Q1: A1: Q2: A2: Q3: A3: Q4: A4: Q5: A5: Q6: A6: Where is the power supply? I did not find one in the box. The TK-210K does not require a power supply. It draws power from your computer's USB connection. As long as your KVM switch is connected to the USB or PS/2 port, it will receive the necessary po...

Page 10 - Limited Warranty

8 Limited Warranty - 2-Year Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TK-210 If a product does not operate as warranted above during the applicable warranty period, T...

Page 12 - Certifications

Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received. Including interference that may cause undesired oper...

Page 13 - US Canada; Worldwide

Copyright ©2007. All Rights Reserved. TRENDnet. Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register TRENDnet Technical Suppor t US Canada 24/7 Tech Support Toll Free Telephone: 1(866) 845-3673 Europe (German...