TRENDNet TEW-436BRM - Manuals

Page 2 - Table of Contents

English 1 1. Before You Start2. Hardware Installation 3 3. Configure The Modem 4 4. Setting up Encryption 7 1 Troubleshooting 8 Wireless Tips 10 Table of Contents Version 11.02.2009

Page 3 - Before You Start; A working ADSL Internet Connection; Package Contents; Multi-Language Quick Installation Guide; System Requirements

1. Before You Start ? ? A computer with a wired or wireless network adapter properly installed. ? Web Browser: Internet Explorer (5.0 or above) A working ADSL Internet Connection Package Contents ? ? CD-ROM (User’s Guide) ? Multi-Language Quick Installation Guide ? 1 x RJ-45 Ethernet Cable ? 1 x RJ-...

Page 4 - A. Dynamic IP connection; Hostname; B. Static or Fixed IP connection

2 During the installation of your Wireless ADSL Modem Router, the Setup Wizard will automatically detect your ISP connection type. If the router cannot detect your ISP connection type, you can manually specify the connection type. Please verify your DSL Internet broadband connection type with your I...

Page 5 - Hardware Installation

ADSL Terminator To PCs Power Power LAN1 LAN2 LAN3 LAN4 ADSL 2. Hardware Installation 3. Connect the AC Power Adapter to the TEW- 436BRM and then to a power outlet. 3 1. Connect one end of the RJ-45 cable to one of the TEW-436BRM's LAN ports. Connect the other end of cable to the computer's Ethernet ...

Page 6 - Configure the Modem; Open your web browser, type; Enter; Note: User name and Password is case; Setup

4 3. Configure the Modem Note: It is recommended that you configure the Modem from a wired computer. 1. Open your web browser, type http://192.168.10.1 in the Address bar, and then press Enter . 2. Enter the User Name and password and then click OK . By default: User name: admin Password: admin Note...

Page 7 - detect your Internet connection, select; Manual Selection; and input the information; Next

5 Note: 1. The example below is for Auto-detect. If the Setup Wizard could not automatically detect your Internet connection, select Manual Selection and input the information using the information provided by your ISP. 2. In the example below, the ADSL connection is PPPoE 6. Configure the settings ...

Page 8 - Note; Please wait while the TEW-436BRM reboots.; Test Internet Connection; click; Finish; Verify that the test has completed successfully.; Close

6 Note : For other connection methods, follow the on screen instructions after you select auto-detect. 7. Please wait while the TEW-436BRM reboots. 8. Check Test Internet Connection , and then click Finish . 9. Verify that the test has completed successfully. Check that the ADSL and Internet LEDs ar...

Page 9 - Setting up Encryption; Then click; Your Configuration is complete; Thank you for choosing TRENDnet; Security

4. Setting up Encryption 7 2. This example below is WPA2-PSK. Select the following: Encryption: WPA2(AES) WPA Authentication Mode: Personal (Pre-Shared Key) Pre-Shared Key Format: Passphrase Pre-Shared Key: Enter an encryption key. For Example: trendnet Then click Apply Changes. For WPA-PSK or WPA2-...

Page 10 - Troubleshooting

I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TEW-436BRM's web configuration page? heck your hardware settings again by following the instructions in Section 2. 2. Make sure the Power, LAN and WLAN l...

Page 12 - Wireless Tips

10 The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID Do not use anything that would be identifying like “Smith Family Network”. Choose something that you would easily identify when searching for available...