TRENDNet TEW-435BRM - Manuals

Page 2 - Table of Contents; Configuration The Modem

Table of Contents Table of Contents Version 06.19.2006 English ...................................................................................................... Troubleshooting ........................................................................................ 1 1 34 7 1. Before You Start2...

Page 3 - Package Content; Before You Start; Modem Router

Installation Requirements Application A working DSL Internet ConnectionA computer with a wired or wireless network adapter properly installed. Package Content 1. Before You Start English 1 TEW-435BRMQuick Installation GuideUser's Guide CD-ROM1 x 2dBi Detachable Antenna1 x RJ-45 Ethernet Cable (Yello...

Page 4 - Collect Internet Service Provider (ISP) Information; A. Dynamic IP connection

English 2 Collect Internet Service Provider (ISP) Information During the installation of your Wireless ADSL Modem Router, the Setup Wizard will automatically detect your ISP connection type. If the router cannot detect your ISP connection type, you can manually specify the connection type. Please ve...

Page 5 - Hardware Installation; Attach the mounting stand to the

English 3 2. Hardware Installation 2. Connect one end of the yellow RJ-45 cable to one of the TEW-435BRM's LAN ports. Connect the other end of cable to the computer's Ethernet port. Then connect the 2dBi detachable antenna. 4. Connect the AC Power Adapter to the TEW-435BRM and then to a power outlet...

Page 6 - Configure the Modem; Open your web browser, type

English 4 3. Configure the Modem Note: It is recommended that you configure the Modem from a wired computer. 2. Enter User name and Password, and then click OK . By default, User name: admin Password: password 1. Open your web browser, type http://192.168.0.1 in the Address bar, and press Enter . 3....

Page 7 - Click; Next; Wait for the Auto Detection process

English 5 5. Select Auto-detect, and then click Next. Note: In the example, the DSL connection is PPPoE. 4. Click Next . 6. Wait for the Auto Detection process to complete.

Page 8 - Your installation is now complete.; Test Internet Connection

Note: If the Setup Wizard could not automatically detect your Internet connection, select Manual Selection and input the information using the information provided by your ISP. Note: For other connection methods, follow the on screen instructions after the Auto Detection. 7. Configure the settings b...

Page 9 - Troubleshooting

7 Troubleshooting Q1: A1: I typed http://192.168.0.1 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TEW-435BRM's web configuration page? First, check your hardware settings again by following the instructions in Section 2. Secon...

Page 10 - Certifications; Enable Access Point; please contact TRENDnet's Technical Support Department.

8 Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received. Including interference that may cause undesired op...

Page 11 - US Canada; Worldwide

Copyright ©2006. All Rights Reserved. TRENDnet. 3135 Kashiwa StreetTorrance, CA 90505USA Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com TRENDnet Technical Suppor t US Canada 24/7 Tech Support Toll Free Telephone...