TRENDNet TEW-430APB - Manuals

Page 2 - Table of Contents

Table of Contents Table of Contents Version 05.19.2006 English ...................................................................................................... Troubleshooting ........................................................................................ 1 1 23 6 1. Before You Start2...

Page 3 - Package Content; Before You Start

Installation Requirements Application Web Browser: Internet Explorer (5.5 or higher) or Netscape Navigator (4.7 or higher).A computer with a network adapter properly installed.A network Switch or Hub with an available network LAN port.A RJ-45 network cable. Package Content 1. Before You Start Englis...

Page 4 - WLAN; and; Hardware Installation; Connect a RJ-45 cable from the; LAN; port of the

3. Verify that the following front panel lights are on: WLAN and LAN . 2. Hardware Installation English 2 2. Connect the Power Adapter to the Access Point and then to a power outlet. Note: Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center o...

Page 5 - Configure the Access Point; OK; Open your web browser, type; Enter; Click; Wizard

English 3 3. Configure the Access Point Note: It is recommended that you configure the Access Point from a wired computer. Before the Access Point can be configured, a Static IP address must be assigned to your computer's network adapter in the subnet of 192.168.1.x. Since the Access Point's default...

Page 6 - (If a; admin; will be; Next

English 4 5. Enter a new password for your Access Point, verify the new password, and then click Next. (If a new password is not entered, the default password admin will be used. 4. Click Next . 6. Enter a SSID for your Access Point and then click Next .

Page 7 - Restart; Enable Encryption if needed and; Your installation is now complete.

English 5 8. Click Restart . 7. Enable Encryption if needed and then click Next . 9. Click Close. Your installation is now complete. For detailed information regarding the TEW-430APB's configuration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet'...

Page 8 - Troubleshooting

6 Troubleshooting Q1: How do I configure TCP/IP settings on my computer? 1. Go into the Control Panel and double- click the Network Connections icon, right-click the Local Area Connection icon and then click Properties . 2. Click Internet Protocol (TCP/IP) and then click Properties . Then click on U...

Page 9 - I can not connect to my network using wireless computers.; If you have a DHCP server in your network, you need to go into TCP/IP

7 Q4: A4: Q5: A5: After I successfully configured the Access Point to meet my network settings, I can not connect to my network using wireless computers. If you have a DHCP server in your network, you need to go into TCP/IP settings again and re-select "Obtain an IP address automatically" to...

Page 11 - US Canada; Worldwide

Copyright ©2006. All Rights Reserved. TRENDnet. Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com TRENDnet Technical Suppor t US Canada 24/7 Tech Support Toll Free Telephone: 1(866) 845-3673 Europe (Germany France ...