TRENDNet 54Mpbs 802.11g Wireless Access Point + Bridge - Manuals

Page 2 - Table of Contents

Table of Contents English ...................................................................................................... Troubleshooting........................................................................................... 1 1 238 13 1. Prepare for Installation ............................

Page 3 - Verify Package Contents; Please make sure you have everything in the box:; English; Prepare for Installation; English QIG; Before installing the Access Point, you should have:; Verify Equipment

Thank you for purchasing the TEW-410APBplus. With this Access Point, you will be able to share your files and resources between wired and wireless PCs. This guide will help you set-up and configure your Access Point. Following the installation instructions should be quick and easy. If you run into p...

Page 4 - Verify Hardware Installation; Verify that the following Access Point LEDs are on.

2 English 1. Connect the RJ-45 network cable from the Access Point to any port on the Hub or Switch. 2. For Wired PC setup, please connect another RJ-45 network cable from the PC to the same Hub or Switch. 3. Connect the AC Power Adapter to the Access Point and to an available power outlet. Turn on ...

Page 5 - Configure the computer ’s TCP/IP Settings; Start

3 3. Configure the computer ’s TCP/IP Settings English The Access Point has a default IP address 192.168.1.250, therefore to be able to access and configure the Access Point, the computer's TCP/IP settings need to be changed. Windows 95/98/98SE/ME 1. Find the Start button located on Desktop. 2. Clic...

Page 6 - IP Address

4 English 5. Under the IP Address tab, select Specify an IP address and enter “192.168.1.50” for the IP address and “255.255.255.0” for the Subnet Mask. Then, click OK . 6. Click OK. 7. At this point, the installation may require files from your Windows CD-ROM. If this happens insert Windows CD-ROM ...

Page 8 - Use the following IP address

6 English 6. Click on Use the following IP address; then enter 192.168.1.50 for IP Address and 255.255.255.0 for Subnet, then click OK . 7. Click OK on the Local Area Connection Properties box to close it. 8. Your computer is now ready to access and configure the Access Point. 5. Under the General t...

Page 9 - Mac OS X; Network

7 English Mac OS X 1. Go to the Apple Menu, click Network and select System Preferences . 2. Select Built in Ethernet in the Show pull-down menu and select Manually in the configuration pull-down menu. 3. Input a valid IP address and subnet mask. (The IP address must be within the same range as the ...

Page 10 - From a Wired PC; Enter; Configure the Access Point

8 English The following set-up information is designed to help you to configure the Access Point to work with your existing Wired or Wireless network. From a Wired PC 1. Open your Web browser and type http://192.168.1.250 into the Address box and press the Enter key. 2. The logon pop-up screen will ...

Page 11 - Apply; button to save the settings.

9 English 3. The configuration page will appear, then you can make changes on the Access Point to match your existing network’s settings such as IP address and Subnet Mask. 4. Scroll down the page to the Wireless section. If you already have a wireless network, change the SSID/Channel and Encryption...

Page 12 - From a Wireless PC

10 English From a Wireless PC 1. Open up the Utility Program for your wireless card. 2. Configure the wirelesss card to have the SSID as ap11g and Channel as 6 and click on Connect to connect to the Access Point. (Example uses TRENDnet's TEW-421PC 802.11g Wireless PC Card). 3. Open your Web browser,...

Page 13 - for the username and; admin; for the password then click; OK; to access the configuration page.

11 English 5. The configuration page will appear. Make changes to your Access Point's settings so that it matches your existing network settings. This may entail changing the IP Address and Subnet Mask. Please refer to the User's Guide on the CD-ROM if you encounter problems. 4. The logon pop-up scr...

Page 14 - Obtain an IP address automatically; option. Reboot the PC, and the computer

12 English 6. Scroll down the page to the Wireless section. If you already have a wireless network, change the SSID/Channel or Encryption to match your wireless network's settings. 7. After you've made the changes, click the Apply button to save the settings. The Access Point is now configured and r...

Page 15 - Troubleshooting

13 For help with advanced features, refer to the User's Guide located on the included CD-ROM. Q1. A1. Q2. A2. Q3. A3. The Access Point will not turn on. None of the LEDs light up. Connect the power adapter to the power outlet and check the LEDs again. Also, verify that you are using the power adapte...

Page 16 - Product Warranty Registration; Please take a moment to register your product online.

Copyright ©2004. All Rights Reserved. TRENDware International, Inc. TRENDnet TRENDware, USA What's Next in Networking @ Product Warranty Registration Please take a moment to register your product online. Go to TRENDware’s website at http://www.TRENDNET.com TRENDware International, Inc. 3135 Kashiwa ...