Transcend ssd720 - Manuals - manualsarea.com

Page 2 - Supported Operating Systems; Supported on; Before Use; back up your data before proceeding.; Preparation for Mac OS; A USB stick with minimum 256MB free space.; Getting Started; Connect the Transcend SSD to your PC or laptop.

Supported Operating Systems Supported on Windows XP/Vista/7 and Fedora Core 14 32-bit. Mac OS: Mac OS X Lion (10.7) or later, and Mac is produced after 2010 Note: 1. Microsoft AHCI driver is required and Microsoft AHCI mode must be enabled on your computer. 2. You must have Administrator privileges ...

Page 3 - Check the box next to the desired drive(s) and click “Update Firmware...”

4. Select one or more desired drives to update. If two or more drives need to be updated at the same time, please ensure that the last five digits of each selected drive in the Signature column are identical to each other or the update will fail. 5. Check the box next to the desired drive(s) and cli...

Page 6 - Partition and format USB stick

Getting Started There are four steps to perform firmware upgrade on Mac OS. 1. Partition and format USB stick 2. Restore image to USB stick 3. Boot from USB 4. Firmware upgrade Partition and format USB stick 1. Launch Disk Utility 2. Select your USB disk then click the Partition tab.

Page 9 - Restore image to USB stick; Launch Disk Utility

Restore image to USB stick 1. Launch Disk Utility 2. Select your USB disk then click the Restore tab 3. Right-click on the volume UNTITLED 1 then select Set as destination.

Page 10 - Click Image and select the source image file to restore.

4. Click Image and select the source image file to restore.

Page 11 - Click Restore to perform the image burning process.

5. Select the USB_LINUX.dmg file that you downloaded from Transcend web site and click Open. 6. Click Restore to perform the image burning process. *Mac OS may prompt you to input your admin password and scan the image file.

Page 12 - After restore is complete, the volume should now be named USB_LINUX.

7. After restore is complete, the volume should now be named USB_LINUX.

Page 13 - Boot from USB stick; Long press the option key until the boot menu is shown.; Update Firmware

Boot from USB stick 1. Long press the option key until the boot menu is shown. 2. Select the EFI Boot icon to boot from the USB stick 3. Please wait for the desktop window to be displayed. The SSD firmware upgrade tool will launch automatically. Update Firmware

Page 15 - Open; firmware file is located under; Proceed; to continue the update process. Click; Cancel; to

3. Check the box next to the desired drive(s) and click Update Firmware… 4. Select the corresponding firmware file (*.VIC), as indicated below, and click Open . The firmware file is located under /tc directory. Please select the folder name that corresponds with the SSD capacity (Ex. 64GB → /tc/64GB...

Page 16 - Rescan For Drives; to confirm that the SSD firmware has been updated successfully.

6. Click Rescan For Drives to confirm that the SSD firmware has been updated successfully.