Toshiba R200 - Manuals

PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] v Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following ...

vi [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Table of Contents Chapter 1 Hardware Overview 1.1 Features ...................................................................................................................... 1-1 1.2 1.8-inch Hard Disk Drive.................................

PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] vii Chapter 3 Tests and Diagnostics 3.1 The Diagnostic Test ................................................................................................... 3-1 3.2 Executing the Diagnostic Test ................................................

viii [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Chapter 4 Replacement Procedures 4.1 Overview .............................................................................................................. 4-1 4.2 Battery pack ...............................................................

PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] ix Appendices Appendix A Handling the LCD Module ........................................................................ A-1 Appendix B Board Layout ................................................................................................

1 Hardware Overview 1-ii [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 1 Hardware Overview

1 Hardware Overview PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 1-iii Chapter 1 Contents 1.1 Features ...................................................................................................................... 1-1 1.2 1.8-inch Hard Disk Drive.....................................

1 Hardware Overview 1-iv [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Figures Figure 1-1 Front of the computer..................................................................................... 1-4 Figure 1-2 System unit configuration ......................................................

1 Hardware Overview 1.2 1.8-inch Hard Disk Drive 1.2 1.8-inch Hard Disk Drive A compact, high-capacity HDD with a height of 5.0/8.0mm. Contains a 1.8-inch magnetic disk and magnetic heads. Figure 1-4 shows a view of the 1.8-inch HDD and Tables 1-1 and 1-2 list the specifications. Figure 1-4 1.8-inch...

1.2 1.8-inch Hard Disk Drive 1 Hardware Overview PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 1-11 Table 1-2 1.8-inch HDD Specifications Specification Parameter TOSHIBA HDD1442BZL01 TOSHIBA HDD1544BZK01 Storage size (formatted) 30GB 60GB Speed (RPM) 4,200 Data transfer speed (Mbits/s) 13...

1.4 TFT Color Display 1 Hardware Overview PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 1-13 1.4 TFT Color Display The TFT color display consists of a LCD module and FL inverter board. 1.4.1 LCD Module The LCD module used for the TFT color display uses a backlight as the light source and ...

1.5 Power Supply 1 Hardware Overview PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 1-15 1.5 Power Supply The power supply supplies twenty-three different voltages to the system board. The power supply microcontroller has the following functions. 1. Judges that the DC power supply (AC adap...

1 Hardware Overview 1.5 Power Supply 1-16 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Table 1-5 lists the power supply output specifications. Table 1-5 Power supply output specifications Name Voltage (V) Use PPV 0.940 - 0.81 CPU (ULV) PTV 1.05 CPU, GMCH, ICH6-M 1R5-P1V 1.5 CPU, GMCH, IC...

1.6 Batteries 1 Hardware Overview PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 1-17 1.6 Batteries The PC has the following three batteries. Main battery Secondary battery (option) Real time clock (RTC) battery Table 1-6 lists the specifications for these two batteries. Table 1-6 Battery ...

1 Hardware Overview 1.6 Batteries 1-18 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 1.6.2 Battery Charging Control Battery charging is controlled by a power supply microprocessor. The power supply microprocessor controls power supply and detects a full charge when the AC adaptor and batt...

1.7 AC Adapter 1 Hardware Overview PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 1-19 1.7 AC Adapter The AC adapter is also used to charge the battery. Table 1-9 lists the AC adapter specifications. Table 1-9 AC adapter specifications Parameter Specification G71C0001A310 G71C0001A410 G71C...

2 Troubleshooting 2-ii [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 2

2 Troubleshooting PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 2-iii Chapter 2 Contents 2.1 Troubleshooting ......................................................................................................... 2-1 2.2 Troubleshooting Flowchart ...........................................

2 Troubleshooting 2.2 Troubleshooting Flowchart 2-2 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 2.2 Troubleshooting Flowchart Use the flowchart in Figure 2-1 as a guide for determining which FRU malfunctions. Before going through the flowchart steps, check the following: ‰ Ask user to e...

2 Troubleshooting 2.3 Power Supply Troubleshooting 2-6 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 2.3 Power Supply Troubleshooting The power supply controller controls many functions and components. To determine if the power supply is functioning properly, start with Procedure 1 and co...

2.3 Power Supply Troubleshooting 2 Troubleshooting Procedure 1 Power supply icon Check The following two icons indicate the power supply status: ‰ Battery icon ‰ DC IN icon The power supply controller uses the power supply status with the Battery icon and the DC IN icon as listed in the tables below...

2.3 Power Supply Troubleshooting 2 Troubleshooting Procedure 2 Error Code Check If the power supply microprocessor detects a malfunction, the DC IN icon blinks orange. The blink pattern indicates an error as shown below. ‰ Start Off for 2 seconds ‰ Error code (8 bit) “1” On for one second “0” On for...

2 Troubleshooting 2.3 Power Supply Troubleshooting 2-10 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Check 1 Convert the DC IN icon blink pattern into the hexadecimal error code and compare it to the tables below. Then go to Check 2. Table 2-3 Error code Error code Where Error occurs 1*h...

2 Troubleshooting 2.3 Power Supply Troubleshooting Procedure 3 Connection Check The wiring diagram related to the power supply is shown below: Any of the connectors may be disconnected. Perform starting from Check 1. Check 1 Make sure the AC adapter and the AC power cord are firmly plugged into the ...

2.3 Power Supply Troubleshooting 2 Troubleshooting PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 2-15 Procedure 4 Charge Check Check if the power supply controller charges the battery pack properly. Perform the following procedures: Check 1 Make sure the AC adapter is firmly plugged into ...

2 Troubleshooting 2.4 System board Troubleshooting 2-16 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 2.4 System board Troubleshooting This section describes how to determine if the System board is defective. Start with Procedure 1 and continue with the other procedures as instructed. The...

2.4 System board Troubleshooting 2 Troubleshooting PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 2-17 Procedure 1 Message Check When the power is turned on, the system performs the Initial Reliability Test (IRT) installed in the BIOS ROM. The IRT tests each IC on the System board and init...

2.4 System board Troubleshooting 2 Troubleshooting Procedure 2 Debug Port Check Check the D port status by a debug port test. The tool for debug port test is shown below. Figure 2-2 A set of tool for debug port test The test procedures are follows: 1. Connect the debug test cable to the connector CN...

2 Troubleshooting 2.4 System board Troubleshooting 2-28 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Table 2-4 D port status (8/8) LED Status Test item Message HW initialization prior to boot, Waiting for the completion of HW initialization Notifies the DVI connection status to VGA BIOS ...

2.4 System board Troubleshooting 2 Troubleshooting PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 2-29 Procedure 3 Diagnostic Test Program Execution Check Execute the following tests from the Diagnostic Test Menu. These tests check the System board and I/O unit. Refer to Chapter 3, Tests a...

2 Troubleshooting 2.5 USB FDD Troubleshooting 2-30 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 2 2.5 USB FDD Troubleshooting This section describes how to determine if the USB FDD is functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other pr...

2.5 USB FDD Troubleshooting 2 Troubleshooting PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 2-31 Procedure 2 Diagnostic Test Program Execution Check Insert the Diagnostics Disk in the USB FDD of the computer, turn on the computer and run the test. Refer to Chapter 3, Tests and Diagnostics...

2.6 1.8” HDD Troubleshooting 2 Troubleshooting PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 2-33 2.6 1.8” HDD Troubleshooting This section describes how to determine if the 1.8” HDD is functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other p...

2 Troubleshooting 2.6 1.8” HDD Troubleshooting 2-34 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Procedure 2 Message Check When the power is turned on, the system performs the Initial Reliability Test (IRT) installed in the BIOS ROM. When the test detects an error, an error message is di...

2.6 1.8” HDD Troubleshooting 2 Troubleshooting PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 2-35 Procedure 3 Format Check The computer’s 1.8” HDD is formatted using the MS-DOS FORMAT program or the physical format program of the test program. To format the 1.8" HDD, start with Check ...

2.6 1.8” HDD Troubleshooting 2 Troubleshooting Procedure 5 Connector Check and Replacement Check HDD is connected to the system board via HD FPC. The connection of HDD, HD FPC or system board may be defective. Otherwise, they may be faulty. Disassemble the computer following instructions in Chapter ...

2 Troubleshooting 2.7 Keyboard Troubleshooting 2.7 Keyboard Troubleshooting To determine if the computer’s keyboard is functioning properly, perform the following procedures. Start with Procedure 1 and continue with the other procedures as instructed. Procedure 1: Diagnostic Test Program Execution C...

2.8 Display Troubleshooting 2 Troubleshooting PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 2-39 2.8 Display Troubleshooting This section describes how to determine if the computer’s display is functioning properly. Start with Procedure 1 and continue with the other procedures as instruct...

2 Troubleshooting 2.9 Touch Pad 2.9 Touch Pad To determine whether the Touch Pad is faulty or not, perform the following procedures: Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check and Cable Check Procedure 3: Replacement Check Procedure 1 Diagnostic Test Program Ex...

2.10 Modem 2 Troubleshooting PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 2-43 2.10 Modem To check if the modem is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check and...

2.12 Sound 2 Troubleshooting 2.12 Sound To check if the sound function is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check Procedure 3: Replacement Check Procedure 1 Diagnostic Te...

2.13 Bluetooth Troubleshooting 2 Troubleshooting PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 2-49 2.13 Bluetooth Troubleshooting To check if the Bluetooth is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Transmitting-Receiving Check Proce...

2 Troubleshooting 2.13 Bluetooth Troubleshooting Procedure 2 Antennas' Connection Check The Bluetooth function-wiring diagram is shown below: Any of the connections may be defective. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the followi...

2.13 Bluetooth Troubleshooting 2 Troubleshooting PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 2-51 Procedure 3 Replacement Check Bluetooth module, Bluetooth antenna or system board may be faulty. Refer to Chapter 4, Replacement Procedures, for instructions on how to disassemble the compu...

2 Troubleshooting 2.14 Wireless LAN Troubleshooting 2-52 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 2.14 Wireless LAN Troubleshooting To check if the wireless LAN is good or no good, follow the troubleshooting procedures below as instructed. Procedure 1: Transmitting-Receiving Check Pr...

2.15 SD card slot 2 Troubleshooting 2.15 SD card slot To check if the SD card slot is good or no good, follow the troubleshooting procedures below as instructed. Procedure 1: Check on Windows Procedure 2: Connector Check and Replacement Check Procedure 1 Check on Windows Insert a SD card into the sl...

2 Troubleshooting 2.16 Fingerprint sensor 2.16 Fingerprint sensor CAUTION: To delete the account for confirming the fingerprint operation, it is necessary to log on by the account with the management authority. If the password has been set to log on, ask the Log-ON password to the user. To check if ...

2.16 Fingerprint sensor 2 Troubleshooting 11. Close all applications and power off the computer. Procedure 3 Authentication of fingerprint 1. Turn on the computer and start up the Windows. 2. In the Windows Log-ON window, scan the fingerprint of your right index finger. Make sure that scanned finger...

3 Tests and Diagnostics 3-ii [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 3

3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-iii Chapter 3 Contents 3.1 The Diagnostic Test ................................................................................................... 3-1 3.1.1 Diagnostics menu ..............................................

3 Tests and Diagnostics 3-vi [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Figure Figure 3-1 Name and positions of each side........................................................................ 3-49 Tables Table 3-1 Subtest names ...........................................................

3.1 The Diagnostic Test 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-1 3 3.1 The Diagnostic Test This chapter explains how to use the Diagnostic Test programs to test the functions of the computer’s hardware modules. The Diagnostics Programs are stored on some D...

3 Tests and Diagnostics 3.2 Executing the Diagnostic Test 3-4 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 3.2 Executing the Diagnostic Test To start the DIAGNOSTIC PROGRAM, follow these steps: 1. Insert the Diagnostics disk in the floppy disk drive. 2. Release the lock of the power swit...

3.2 Executing the Diagnostic Test 3 Tests and Diagnostics 3.2.1 Diagnostics menu (T&D) To execute this program, select 1- Repair Main (T&D) in the startup menu, press Enter . The following menu appears. TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 20X...

3 Tests and Diagnostics 3.2 Executing the Diagnostic Test Set the highlight bar to 1 , and press Enter . The following DIAGNOSTIC TEST MENU will appear: TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 20XX DIAGNOSTIC TEST MENU : 1 - SYSTEM TEST 2 - MEMORY TEST 3...

3.2 Executing the Diagnostic Test 3 Tests and Diagnostics Select the option you want to execute and press Enter . When you select 1-SYSTEM TEST , the following message will appear: SYSTEM TEST NAME XXXXXX xxxxxxx DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end [Ctrl]+[C] : key stop SUB-TEST : XX PAS...

3 Tests and Diagnostics 3.2 Executing the Diagnostic Test 3-8 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Selecting YES of ERROR STOP stops the test program when an error is found and displays the operation guide on the right side of the display screen as shown below: ERROR STATUS NAME ...

3.3 Setting of the hardware configuration 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-9 3.3 Setting of the hardware configuration To execute this program, select 2-Repair initial config set in the startup menu, press Enter and follow the directions on the scree...

3 Tests and Diagnostics 3.3 Setting of the hardware configuration 3-10 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) • Setting of the HWSC • Setting of the UUID • Display of the DMI information (including UUID) • Setting of DVD region code (Yes/No) After completion of the above settings, ...

3.3 Setting of the hardware configuration 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-11 Subtest 08 System configuration display This subtest displays the information of the system configuration. When the following message appears, confirm the contents and pres...

3 Tests and Diagnostics 3.4 Heatrun Test 3-12 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 3.4 Heatrun Test To execute this program, select 3-Repair heatrun (T&D) in the startup menu, press Enter . When selecting the option you want to execute, the message shown below will appear and...

3.5 Subtest Names 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-13 3.5 Subtest Names Table 3-1 lists the subtest names for each test program in the DIAGNOSTIC TEST MENU. Table 3-1 Subtest names (1/2) No. Test Name Subtest No. Subtest Name 1 SYSTEM 01 02 03 04 05 ...

3 Tests and Diagnostics 3.8 Keyboard Test 3-18 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 3.8 Keyboard Test To execute the Keyboard Test, select 3 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execu...

3 Tests and Diagnostics 3.9 Display Test Subtest 04 Gradation & Mode test for VGA This subtest displays gradations for following modes. To change the mode, press Enter . [Mode 12] [Mode 13] [Mode 3 ] [Mode 111 640*480 64K] [Mode 112 640*480 16M] [Mode 114 800*600 64K] [Mode 115 800*600 16M] [Mod...

3 Tests and Diagnostics 3.10 Floppy Disk Test 3.10 Floppy Disk Test CAUTION: Before running the floppy disk test, prepare a formatted work disk. Remove the Diagnostics Disk and insert the work disk into the FDD because the contents of the floppy disk will be erased. To execute the Floppy Disk Test, ...

3 Tests and Diagnostics 3.11 Printer Test 3.11 Printer Test CAUTION: Printer Test is not supported for this model. To execute the Printer Test, select 6 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. NOTE: An IBM compatible printer must be connected to the system...

3 Tests and Diagnostics 3.12 Async Test 3-26 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 3.12 Async Test CAUTION: Async Test is not supported for this model. To execute the Async Test, select 7 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions displayed on the screen....

3.13 Hard Disk Test 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-27 3.13 Hard Disk Test To execute the Hard Disk Test, select 8 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. CAUTION: The contents of the hard disk will be era...

3.13 Hard Disk Test 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-29 Subtest 04 Cross talk & peak shift This subtest writes eight types of worst pattern data (listed below) to a cylinder and then reads the data while moving from cylinder to cylinder. (Tests t...

3 Tests and Diagnostics 3.14 Real Timer Test 3-30 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 3 3.14 Real Timer Test To execute the Real Timer Test, select 9 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you wan...

3.16 Expansion Test 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-33 3.16 Expansion Test To execute the expansion test, select 11 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. Subtest 01 PCMCIA wraparound NOTE: To execute th...

3.17 CD-ROM/DVD-ROM Test 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-35 3.17 CD-ROM/DVD-ROM Test To execute the CD-ROM/DVD-ROM test, select 12 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. NOTE: For the subtest 01, 02 and ...

3 Tests and Diagnostics 3.18 Error Code and Error Status Names 3-36 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 3.18 Error Code and Error Status Names Table 3-2 lists the error codes and error status names for the Diagnostic Test. Table 3-2 Error codes and error status names (1/3) Devic...

3.19 Hard Disk Test Detail Status 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-39 3.19 Hard Disk Test Detail Status When an error occurs in the hard disk test, the following message is displayed: HDC status = XXXXXXXX Detailed information about the hard disk tes...

3.20 ONLY ONE TEST 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-41 3.20 ONLY ONE TEST 3.20.1 Program Description This program tests the unique functions of this model. 3.20.2 Operations Select test 2 from the DIAGNOSTIC MENU and press Enter . The following menu ...

3 Tests and Diagnostics 3.20 ONLY ONE TEST Subtest 03 GP Button This subtest checks moving of the front operation panel button. Press the Toshiba Presentation button after the following message appears. Press [Toshiba Presentation button] button Power switch Toshiba Presentation Toshiba Assist Press...

3 Tests and Diagnostics 3.20 ONLY ONE TEST 3-48 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Subtest 08 PC-Card Device Lock This subtest checks the device lock function. This test needs a PC card, not a PC wraparound card. Before this test, inset a PC card. When it passes the test, follo...

3.20 ONLY ONE TEST 3 Tests and Diagnostics Subtest 0A Acceleration sensor This subtest detects and corrects the each axis (X, Y, Z). NOTE: Make sure that this subtest is executed on the following condition: 1. Flat desk with vertical plane to get the stability of machine. 2. Prevent the machine from...

3.21 Head Cleaning 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-51 3.21 Head Cleaning 3.21.1 Function Description This function cleans the heads in the FDD by executing a series of head load/seek and read operations. A cleaning kit is necessary to perform this p...

3 Tests and Diagnostics 3.22 Log Utilities 3-52 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 3.22 Log Utilities 3.22.1 Function Description This function logs error information generated while a test is in progress and stores the results in RAM. This function can store data on a floppy d...

3.22 Log Utilities 3 Tests and Diagnostics 3.22.2 Operations 1. Select 5 and press Enter in the DIAGNOSTIC MENU, the error information is displayed in the following format: XXXXX ERRORS CNT TS-NO PASS STS ADDR WD RD HSTS [ERROR STATUS NAME] 001 FDD 02 0000 103 00001 00 00 0000 FDD-WRITE PROTECTED 00...

3.24 Floppy Disk Drive Utilities 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-55 3.24 Floppy Disk Drive Utilities 3.24.1 Function Description This function formats the FDD, copies the floppy disk and displays the dump list for both the FDD and HDD. 1. FORMAT NOT...

3 Tests and Diagnostics 3.24 Floppy Disk Drive Utilities 3-56 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 3.24.2 Operations 1. Selecting 7 from the DIAGNOSTIC MENU and pressing Enter displays the following message. [ FDD UTILITIES ] 1 - FORMAT 2 - COPY 3 - DUMP 4 – HDD-ID READ 9 - EXIT ...

3.24 Floppy Disk Drive Utilities 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-57 3. COPY program (a) When COPY is selected, the following message appears. FLOPPY DISK FORMAT & COPY : VX.XX Type select (0:2DD,3:2HD) ? (b) Selecting a media/drive type number w...

3.24 Floppy Disk Drive Utilities 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-59 (k) The following message will appear. To finish the dump, select 3 . Press number key (1:up,2:down,3:end) ? (l) The following message will appear. Selecting 2 returns to the FDD UT...

3 Tests and Diagnostics 3.25 System Configuration 3-60 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 3 3.25 System Configuration 3.25.1 Function Description NOTE: To display the system configuration, the write protect tab should be OFF position. If the tab is ON position, move the tab to ...

3.26 Wireless LAN Test Program (Atheros) 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-63 3.26.1 Setting Responder PC 1. When the responder PC has MB44a/g or MB43 Insert the FD, “MB4x Responder media”, in the FDD and power on the computer. When OS is booted, the ...

3 Tests and Diagnostics 3.26 Wireless LAN Test Program (Atheros) 3-64 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 3.26.2 Test procedure 1. Boot the DUT PC by the FD, “MB4x/MB5x boot media”. The following message is displayed. ************************************************************ ...

3 Tests and Diagnostics 3.26 Wireless LAN Test Program (Atheros) 3-66 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 3.26.3 Contents of Test 1. SKU check of Module This displays the destination information of the wireless LAN module as follows: *********************************************...

3.26 Wireless LAN Test Program (Atheros) 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-67 4. Communication test of 11g mode Communication test of 11g mode Communication test of 11g mode (Main Antenna only) This checks the antenna connection in 11g mode and transm...

3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-69 3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program This section describes how to perform the LAN/Modem/Bluetooth/IEEE1394 test with the test program. Insert the test progr...

3 Tests and Diagnostics 3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program Subtest01 (i82562 + ICHx) NOTE: (i82562 + ICHx) test is not supported in this model. This subtest checks the operation of mini-PCI I/F by the loopback test in the chip. The following message will appear. [LAN transmit & recei...

3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program 3 Tests and Diagnostics Subtest02 (GbE) This subtest checks the operation of mini-PCI I/F by the loopback test in the chip. Select 2 to execute and press Enter . The following message will appear. Testing adapter...hit <ESC> to abort. * External L...

3 Tests and Diagnostics 3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program 3-72 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 3.27.2 Modem test For this subtest, connect the modem PCB and RJ11 connector with a harness. Use the dedicated “FAT-MODE inspection device (product code: QE2000P01 mad...

3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-73 3.27.3 Bluetooth test To execute this test, input 3 and press Enter . NOTE: This model does not support the Bluetooth test. NOTE: Use another computer that can communi...

3 Tests and Diagnostics 3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program 3-74 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Subtest01 BD_ADDR check This subtest checks the BD_ADDR functions. When the Bluetooth test menu is displayed, press 1 to select the test and press Enter . The followin...

3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-75 If the target machine has any problem, it displays Error message. The following message is displayed. -----------------------------------------------------------------...

3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-77 Table 3-6 Error code for Bluetooth test (BD_ADDR) (2/2) Error code Meaning 0x20 Unsupported LMP Parameter Value. 0x21 Role Change Not Allowed. 0x22 LMP Response Timeou...

3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-79 Insert a floppy disk containing the test program into the tester machine and turn on the power. When the Bluetooth test menu is displayed on the tester machine, press ...

3 Tests and Diagnostics 3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program 3-80 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) If the DUT machine has any problem or S of the DUT machine is pressed before connection to tester machine, the following message “ INCOMPLETE ” is displayed. ---------...

3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-83 3.27.4 IEEE1394 test To execute this test, input 4 and press Enter . NOTE: Use another computer that can communicate by IEEE1394 (i. Link) cable as a reference machine...

3 Tests and Diagnostics 3.28 Sound Test program 3-84 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 3 Tests and Dia tics 3.28 Sound Test program gnos This section describes how to perform the Sound test. To execute the sound test, refer to the following description. Insert the test program...

3.28 Sound Test program 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-85 To return to the Sound test menu, Press 9 and Enter . Then following message will appear in the display. *********************************** ******** May I Restart ? ******* ****************...

3.28 Sound Test program 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-89 3.28.3.2 Audio CD Insert an audio CD and the following menu appears in the display. CD/DVD TEST IN PROGRESS XXXXXXXX xxxxxxx DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end [Ctrl]+[C] : key ...

3.29 SETUP 3 Tests and Diagnostics PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 3-93 Moving Within the SETUP Menu and Changing Values 1. Press Å and Æ to move between the two columns. Press ↑ and ↓ to move between items in a column. Press Fn + ↑ ( PgUp) and Fn + ↓ ( PgDn) to move between...

3 Tests and Diagnostics 3.29 SETUP SETUP Options The SETUP screen is divided into functionally related groups. This section describes each group and its options. 1. Memory This group of options displays the computer’s memory. (a) Total This field displays the total amount of memory installed and is ...

3 Tests and Diagnostics 3.29 SETUP 3-98 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) (b) HDD Priority Set the priority of the HDD as a startup device. Built-in HDD → USB The priority is set as built-in HDD → USB (Default) USB → Built-in HDD The priority is set as USB memory → built-in HD...

3.29 SETUP 3 Tests and Diagnostics 8. Others Whether or not you need to configure the computer with these options depends primarily on the kind of software or peripherals you use. (a) Dynamic CPU Frequency Mode Use this option to choose a setting from the followings. Dynamically Switchable CPU power...

3 Tests and Diagnostics 3.29 SETUP 3-100 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) or BackSpace . Press ↓ to move the cursor to the right and ↑ to move the cursor to the left when you set the date and time. For the Alarm Time , set the time to turn on the power automatically. The “sec...

4 Replacement Procedures 4-ii [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 4

4.1 Overview 4 Replacement Procedures 4 4.1 Overview This chapter describes the procedure for removing and replacing the field replaceable units (FRUs) in the PC. It may not be necessary to remove all the FRUs in order to replace one. The chart below provides a guide as to which other FRUs must be r...

4 Replacement Procedures 4.1 Overview 4-2 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Safety precautions Please read the following safety instructions before disassembling the computer and always follow the instructions while working on the computer. DANGER: 1) Always use the genuine ba...

4.1 Overview 4 Replacement Procedures PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-3 Before You Begin Take note of the following points before starting work. Always remove the AC adapter and battery pack before commencing any of the procedures. The procedure for removing the battery pa...

4 Replacement Procedures 4.1 Overview Disassembly Procedures Three main types of cable connector are used. Pressure plate connector Spring connector Normal pin connector 1. When disconnecting a pressure plate connector, draw the tab on one side of the plastic pressure plate on the connector and pull...

4.1 Overview 4 Replacement Procedures PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-5 Assembly Procedure After the computer has been disassembled and the part that caused the fault has been repaired or replaced, the computer must be reassembled. Take note of the following general points...

4 Replacement Procedures 4.1 Overview Screw Tightening Torque Use the following torque when tightening screws. CAUTION: Overtightening may damage screws or parts. Undertightening may allow screws to loosen (and possibly fall out) causing a short circuit or other damage. NOTE: To tighten screws quick...

4.1 Overview 4 Replacement Procedures Grip Color Some screws have a colored grip area to help you determine the length of the screw. Even numbered length screws: Brown Odd numbered length screws: White Special length screw: Blue “Special length screw” means screws whose length is indicated in an int...

4 Replacement Procedures 4.2 Battery pack 4.2 Battery pack Removing the battery pack To remove the battery pack, follow the steps below and refer to Figure 4-1. CAUTION: Take care not to short circuit the terminals when removing the battery pack. Similarly, do not drop, knock, scratch, disassemble, ...

4.2 Battery pack 4 Replacement Procedures PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-9 Installing the battery pack To install the battery pack, follow the steps below and refer to Figure 4-1. CAUTION: There is a danger that the lithium ion battery pack may explode if not fitted, oper...

4 Replacement Procedures 4.3 PC card/SD card 4.3 PC card/SD card 4.3.1 PC card Removing the PC card To remove the PC card, follow the steps below and refer to Figure 4-2. CAUTION: Insert or remove the PC card in accordance with any instructions in the PC card manual or the manuals of the computer sy...

4.3 PC card/SD card 4 Replacement Procedures 4.3.2 SD card Removing the SD card To remove the SD card, follow the steps below and refer to Figure 4-3. CAUTION: Insert or remove the SD card in accordance with any instructions in the SD card manual or the manuals of the computer system you are using. ...

4 Replacement Procedures 4.4 Expansion Memory module 4.4 Expansion Memory module CAUTION: The power of the computer must be turned off when you remove the memory module. Removing a memory module with the power on risks damaging the module or the computer itself. Do not touch the memory module termin...

4.4 Expansion Memory module 4 Replacement Procedures PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-13 Installing the Expansion memory module To install the expansion memory module, follow the steps below and refer to Figure 4-4. CAUTION: The power must be turned off when you insert the ...

4 Replacement Procedures 4.5 HDD 4.5 HDD Removing the HDD To remove the HDD, follow the steps below and refer to Figure 4-5 to 4-7. CAUTION: Take care not to press on the top or bottom of the HDD. Pressure may cause data loss or damage to the device. 1. Remove the following screw and HDD slot cover ...

4.5 HDD 4 Replacement Procedures 2. Hold the tab of the HDD assembly and remove the HDD assembly from the connector CN4 of the HD FPC. HDD assembly Tab CN4 Figure 4-6 Removing the HDD assembly 3. Peel off two gaskets from the HDD unit and detach the HDD from the HDD holder . HDD HDD holder Gasket Fi...

4 Replacement Procedures 4.5 HDD Installing the HDD To install the HDD, follow the steps below and refer to Figure 4-5 to 4-7. 1. Install the HDD to the HDD holder and stick two gaskets on the HDD unit. CAUTION: 1. When replacing the HDD, be sure to stick gaskets on the HDD unit. 2. Stick two gasket...

4.6 Keyboard 4 Replacement Procedures 4.6 Keyboard Removing the keyboard To remove the keyboard, follow the steps below and refer to Figure 4-8 and 4-9. CAUTION: As the keytop may fall out, when handling the keyboard always hold it by the frame and do not touch the keytop. 1. Remove the following sc...

4 Replacement Procedures 4.6 Keyboard 6. Disconnect the keyboard flexible cable from the connector CN3200 on the system board and remove the keyboard . CN3200 Keyboard flexible cable Figure 4-9 Removing the keyboard Installing the keyboard To install the keyboard, follow the steps below and refer to...

4.7 Switch board 4 Replacement Procedures 4.7 Switch board Removing the Switch board To remove the switch board, follow the steps below and refer to Figure 4-10. 1. Turn over the computer and remove the following screw . • M2 × 8S BIND screw x1 2. Turn the computer face up and open the display. 3. R...

4 Replacement Procedures 4.7 Switch board 4-20 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Installing the Switch board To install the switch board, follow the steps below and refer to Figure 4-10. 1. Connect the switch cable to the connector CN3270 on the system board. 2. Install the sw...

4.8 Touch pad 4 Replacement Procedures 4.8 Touch pad Removing the Touch pad To remove the touch pad, follow the steps below and refer to Figure 4-11 and 4-12. 1. Remove the touch pad cover while releasing the latches. Touch pad cover Figure 4-11 Removing the touch pad cover PORTEGE R200 Maintenance ...

4 Replacement Procedures 4.8 Touch pad 2. Disconnect the touch pad cable from the connector CN3240 on the system board. 3. Remove the following screws fixing the touch pad assembly. • M2 × 3C S-FLAT HEAD screw x2 4. Remove the touch pad assembly from the palm rest while releasing the adhesive portio...

4.8 Touch pad 4 Replacement Procedures PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-23 Installing the touch pad To install the touch pad, follow the steps below and refer to Figure 4-11 and 4-12. 1. Connect the touch pad cable to the connector on the touch pad assembly. 2. Install the ...

4 Replacement Procedures 4.9 Cover assembly/Battery latch assembly 4.9 Cover assembly/Battery latch assembly Removing the Cover assembly/Battery latch assembly To remove the cover assembly/battery latch assembly, follow the steps below and refer to Figure 4-13 to 4-15. 1. Turn over the computer and ...

4.9 Cover assembly/Battery latch assembly 4 Replacement Procedures 2. Turn the computer face up and open the display. 3. Remove the following screws . • M2 × 4B S-FLAT HEAD screw x2 4. Remove the cover assembly by lifting it up from the base assembly. M2 × 4B S-FLAT HEAD Cover assembly Figure 4-14 R...

4 Replacement Procedures 4.9 Cover assembly/Battery latch assembly 5. Remove the following screws and battery latch assembly . • M2 × 2.5B S-FLAT HEAD screw x3 Battery latch assembly M2 × 2.5B S-FLAT HEAD M2 × 2.5B S-FLAT HEAD Figure 4-15 Removing the battery latch assembly Installing the Cover asse...

4.10 Bluetooth module 4 Replacement Procedures 4.10 Bluetooth module Removing the Bluetooth module To remove the Bluetooth module, follow the steps below and refer to Figure 4-16. 1. Remove the following screw securing the Bluetooth module . • M2 × 3C S-FLAT HEAD screw x1 2. Disconnect the Bluetooth...

4 Replacement Procedures 4.11 Speaker/Fingerprint sensor board 4.11 Speaker/Fingerprint sensor board Removing the Speaker/Fingerprint sensor board To remove the speaker/fingerprint sensor board, follow the steps below and refer to Figure 4-17 and 4-18. 1. Remove the following screw and lift up the S...

4.11 Speaker/Fingerprint sensor board 4 Replacement Procedures 5. Remove the following screw and fingerprint sensor board . • M2 × 3C S-FLAT HEAD screw x1 M2 × 3C S-FLAT HEAD Fingerprint sensor board Figure 4-18 Removing the fingerprint sensor board Installing the Speaker/Fingerprint sensor board To...

4 Replacement Procedures 4.12 MDC board 4.12 MDC board Removing the MDC board To remove the MDC board, follow the steps below and refer to Figure 4-19. 1. Remove the following screws and disconnect the MDC board from the connector CN3010 on the MP FPC. • M2 × 3C S-FLAT HEAD screw x2 2. Disconnect th...

4.13 RTC battery 4 Replacement Procedures 4.13 RTC battery Removing the RTC battery To remove the RTC battery, follow the steps below and refer to Figure 4-20. 1. Peel off the two glass tapes . 2. Disconnect the RTC battery cable from the connector CN9990 on the system board and remove the RTC batte...

4 Replacement Procedures 4.14 Wireless LAN card 4.14 Wireless LAN card Removing the Wireless LAN card To remove the Wireless LAN card, follow the steps below and refer to Figure 4-21. 1. Disconnect the wireless LAN antenna cables (black and white) from the Wireless LAN card using an antenna coaxial ...

4.15 Fan 4 Replacement Procedures 4.15 Fan Removing the Fan To remove the fan, follow the steps below and refer to Figure 4-22. 1. Peel off the glass tape and disconnect the fan cable from the connector CN8770 on the system board. 2. Remove the following screws and fan . • M2 × 4C BIND screw x2 Glas...

4 Replacement Procedures 4.16 MP FPC 4.16 MP FPC Removing the MP FPC To remove the MP FPC, follow the steps below and refer to Figure 4-23. 1. Remove the following screw and kill switch holder . • M2 × 3C S-FLAT HEAD screw x1 2. Remove the following screws and disconnect the MP FPC from the connecto...

4.16 MP FPC 4 Replacement Procedures PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-35 Installing the MP FPC To install the MP FPC, follow the steps below and refer to Figure 4-23. 1. Connect the MP FPC to the connector CN9500 on the system board and secure it with the following screws ....

4 Replacement Procedures 4.17 HD FPC 4.17 HD FPC Removing the HD FPC To remove the HD FPC, follow the steps below and refer to Figure 4-24. 1. Peel off the glass tape and disconnect the HD FPC from the connector CN1800 on the system board. Glass tape HD FPC CN1800 Figure 4-24 Removing the HD FPC Ins...

4.18 PC card slot 4 Replacement Procedures 4.18 PC card slot Removing the PC card slot To remove the PC card slot, follow the steps below and refer to Figure 4-25. 1. Remove the following screws fixing the PC card slot. • M2 × 4C S-FLAT HEAD screw x2 2. Remove the PC card slot from the connector CN2...

4 Replacement Procedures 4.19 LAN/Modem jack 4.19 LAN/Modem jack Removing the LAN/Modem jack To remove the LAN/Modem jack, follow the steps below and refer to Figure 4-26. 1. Disconnect the LAN cable from the connector CN4100 on the system board. 2. Remove the LAN/Modem jack from the slot. CN4100 LA...

4.20 System board 4 Replacement Procedures PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-39 4.20 System board Removing the System board To remove the system board, follow the steps below and refer to Figure 4-27. 1. Disconnect the LCD cable and FL cable from the connectors CN5600 and CN...

4 Replacement Procedures 4.20 System board M2 × 3C S-FLAT HEAD System board Audio cover 4-40 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Figure 4-27 Removing the system board Installing the system board To install the system board, follow the steps below and refer to Figure 4-27. 1. Ins...

4.21 Internal microphone 4 Replacement Procedures 4.21 Internal microphone Removing the Internal microphone To remove the internal microphone, follow the steps below and refer to Figure 4-28. 1. Disconnect the microphone cable from the connector CN6050 on the system board. 2. Remove the internal mic...

4 Replacement Procedures 4.22 LED FPC 4.22 LED FPC Removing the LED FPC To remove the LED FPC, follow the steps below and refer to Figure 4-29. 1. Remove the following screws and LED FPC . • M2 × 3C S-FLAT HEAD screw x2 M2 × 3C S-FLAT HEAD LED FPC Figure 4-29 Removing the LED FPC Installing the LED ...

4.23 Display mask 4 Replacement Procedures 4.23 Display mask Removing the Display mask To remove the display mask, follow the steps below and refer to Figure 4-30. 1. Peel off the six mask seals and four LCD cushions on the LCD mask and remove the following screws . • M2 × 3.2S FLAT HEAD screw x8 (“...

4 Replacement Procedures 4.23 Display mask 4-44 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Installing the Display mask To install the display mask, follow the steps below and refer to Figure 4-30. 1. Install the display mask while engaging the latches. 2. Secure the following screws to...

4.24 FL inverter/LCD unit 4 Replacement Procedures 4.24 FL inverter/LCD unit Removing the FL inverter/LCD unit To remove the FL inverter/LCD unit, follow the steps below and refer to Figure 4-31 and 4-32. 1. Remove the following screw fixing the FL inverter. • M2 × 3C S-FLAT HEAD screw x1 2. Peel th...

4 Replacement Procedures 4.24 FL inverter/LCD unit 4. Carefully lift up the top of the LCD unit and peel off the glass tape . 5. Disconnect the LCD cable and remove the LCD unit . Glass tape LCD cable LCD unit Figure 4-32 Removing the LCD unit 4-46 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960...

4.24 FL inverter/LCD unit 4 Replacement Procedures PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-47 Installing the FL inverter/LCD unit To install the FL inverter/LCD unit, follow the steps below and refer to Figure 4-31 and 4-32. 1. Set the LCD unit to the display cover in place. 2. Co...

4 Replacement Procedures 4.25 Hinge 4.25 Hinge Removing the Hinge To remove the hinge, follow the steps below and refer to Figure 4-33 to 4-35. 1. Remove the following screws (back) and hinge caps (left and right). • M2 × 3C S-FLAT HEAD screw x2 M2 × 3C S-FLAT HEAD M2 × 3C S-FLAT HEAD Hinge cap Hing...

4.25 Hinge 4 Replacement Procedures 2. Remove the following screws (back) and palm rest . • M2.5 × 4B FLAT HEAD screw x4 M2.5 × 4B FLAT HEAD M2.5 × 4B FLAT HEAD Palm rest Figure 4-34 Removing the palm rest PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-49

4 Replacement Procedures 4.25 Hinge 3. Take out the LCD cable from the hole. 4. Remove the following screws and hinges of the both sides. • M3 × 3S BIND screw x2 • M2 × 4B S-FLAT HEAD screw x2 LCD cable Hinge Hinge M3 × 3S BIND M3 × 3S BIND M2 × 4B S-FLAT HEAD M2 × 4B S-FLAT HEAD Figure 4-35 Removin...

4.25 Hinge 4 Replacement Procedures PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-51 Installing the hinge To install the hinge, follow the steps below and refer to Figure 4-33 to 4-35. 1. Install the both sides’ hinges and secure them with the following screws . • M3 × 3S BIND screw x2 ...

4 Replacement Procedures 4.26 Wireless LAN antenna/Bluetooth antenna 4.26 Wireless LAN antenna/Bluetooth antenna 4.26.1 Wireless LAN antenna Removing the Wireless LAN antenna To remove the wireless LAN antenna, follow the steps below and refer to Figure 4-36. 1. Peel off the six acetate tapes on the...

4.26 Wireless LAN antenna/Bluetooth antenna 4 Replacement Procedures 4.26.2 Bluetooth antenna Removing the Bluetooth antenna To remove the Bluetooth antenna, follow the steps below and refer to Figure 4-37. 1. Peel off the five acetate tapes on the display cover. 2. Peel off the Bluetooth antenna fr...

4 Replacement Procedures 4.27 Fluorescent Lamp 4-54 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) 4.27 Fluorescent Lamp This system uses LCD modules from the following supplier. Type Part.No Supplier Section 12.1 inch G33C0002C110 TMD 4.27.1 NOTE: - When working with a LCD module, always ...

4.27 Fluorescent Lamp 4 Replacement Procedures 4.27.1 Replacing the 12.1 Inch TMD fluorescent lamp The following describes the procedure for replacing the fluorescent lamp (See Figure 4-38 to 4-47). Disassembling the module 1. Peel off tapes and insulating sheets. 1) Place carefully the module face ...

4.27 Fluorescent Lamp 4 Replacement Procedures 5. Removing the cell with the PCB 1) Remove the cell with the PCB from the backlight unit as shown in the figure below. CAUTION: 1) Peel off the cell carefully not to break it. 2) Be careful not to damage the TAB. Cell Figure 4-42 Replacing Toshiba fluo...

4.27 Fluorescent Lamp 4 Replacement Procedures 2. Assembling the cell with the PCB 1) Illuminate the backlight. 2) Make sure there is no scratch or dirt on the backlight. Also check the back of the cell. Next, install the cell with the PCB to the backlight unit. CAUTION: 1) Install by aligning the l...

Appendices PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] App-iii Appendix Contents Appendix A Handling the LCD Module......................................................................... A-1 Appendix B Board Layout..........................................................................

Appendices App-iv [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) C.19 CN8800 DC-IN Connector (2pin) ..............................................................C-14 C.20 CN8810 1 st Battery Connector (10pin) .......................................................C-15 C.21 CN8770 Fan Conn...

Appendices App-vi [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Tables Table B-1 System board (front) .....................................................................................B-2 Table B-2 System board (back) .......................................................................

Appendix A Handling the LCD Module Appendices Apx. A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged during assembly or disassembly. Observe the following precautions when handling the LCD module: 1. When installing the LCD module in th...

Appendices Appendix A Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, try breathing on the surface to create a light condensate and wipe it again. If the surface is very dirty, we recommend a CRT cleaning agent. Apply the agent...

Appendix B Board Layout Appendices Apx. B Appendix B Board Layout B.1 System board Front View Figure B-1 System board layout (front) PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] B-1

Appendices Appendix B Board Layout B-2 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Table B-1 System board (front) Mark Number Name (A) CN5620 External CRT Connector (B) CN6050 Internal Microphone connector (C) CN8800 DC-IN Connector (D) CN4610 USB 0 Connector (E) CN4611 USB 3 Connector ...

Appendix B Board Layout Appendices B.2 System board Back View Figure B-2 System board layout (Back) PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] B-3

Appendix C Pin Assignment Appendices PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] C-1 Apx. C Pin Assignment Appendix C Pin Assignment System Board C.1 CN1400 SO-DIMM0 connector (200pin) Table C-1 SO-DIMM0 connector (200pin)(1/4) Pin No. Signal name I/O Pin No. Signal Name I/O 1 MRVREF-B0...

Appendix C Pin Assignment Appendices PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] C-13 C.14 CN5601 FL Inverter Connector (8pin) Table C- 14 FL Inverter Connector (8pin) Pin No. Signal name I/O Pin No. Signal name I/O 1 FL-P5V O 2 FL-P5V O 3 GND - 4 GND - 5 BKLPWM-P2P O 6 FL-P5V - 7 FL-P5...

Appendices Appendix C Pin Assignment C-20 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) MP FPC C.29 CN2200 MINI PCI I/F Connector (124pin) Table C- 29 MINI PCI I/F Connector (124pin) (1/3) Pin No. Signal name I/O Pin No. Signal name I/O 1 N.C. - 2 N.C. - 3 N.C. - 4 N.C. - 5 N.C. - 6 N.C. ...

Appendix C Pin Assignment Appendices PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] C-25 FS Board C.32 CN950 SP FPC I/F Connector (6pin) Table C- 32 SP FPC I/F Connector (6pin) Pin No. Signal name I/O Pin No. Signal name I/O 1 GND - 2 USBFS-S3P I/O 3 USBFS-S3N I/O 4 GND - 5 FGSPON-S3N I 6 ...

Appendix D Keyboard Scan/Character Codes Appendices PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] D-1 Apx. D Keyboard Scan/Character Codes Appendix D Keyboard Scan/Character Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note ...

Appendices Appendix D Keyboard Scan/Character Codes D-4 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Table D-1 Scan codes (set 1 and set 2) (4/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 122 F11 57 D7 78 F0 78 *3 123 F12 58 D8 07 F0 07 *3 124 PrintSc *6 *6 *6 *6 *6...

Appendix D Keyboard Scan/Character Codes Appendices PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] D-5 Table D-2 Scan codes with left Shift key Code set 1 Code set 2 Cap No. Key top Make Break Make Break 55 / E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E0 4A E0 F0 4A E0 12 75 INS E0 AA E0 52 E0 D2 E0...

Appendices Appendix D Keyboard Scan/Character Codes D-6 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519) Table D-3 Scan codes in Numlock mode Code set 1 Code set 2 Cap No. Key top Make Break Make Break 75 INS E0 2A E0 52 E0 D2 E0 AA E0 12 E0 70 E0 F0 70 E0 F0 12 76 DEL E0 2A E0 53 E0 D3 E0 A...

Appendix E Key Layout Appendices Apx. E Key Layout Appendix E Key Layout Figure E-1 Key layout (UK) Figure E-2 Key layout (US) PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] E-1

Appendix F Wiring diagrams Appendices Appendix F Appendix F Wiring diagrams F.1 LAN Loopback Connector Figure F-1 LAN loopback connector PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] F-1

Appendix G BIOS rewrite procedures Appendices Appendix G Appendix G BIOS rewrite procedures This Appendix explains how to rewrite the system BIOS program when you update the system BIOS. Tools To rewrite the BIOS, you need the following tool: ‰ BIOS/EC/KBC rewriting disk for the computer that has re...

Appendix H EC/KBC rewrite procedures Appendices PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] H-1 Appendix H Appendix H EC/KBC rewrite procedures This Appendix explains how to rewrite the EC/KBC system program when you update the EC/KBC system. Tools To rewrite the EC/KBC, you need the fo...

Appendix I Reliability Appendices PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] I-1 Apx. I Reliability Appendix I Reliability The following table shows MTBF (Mean Time Between Failures) for each component. Table I-1 MTBF Component Time (hours) System 5,789