Toshiba L310 - Manuals

User’s Manual v FCC information FCC notice “Declaration of Conformity Information” This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfe...

vi User’s Manual BSMI notice (Taiwan only) EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460...

User’s Manual vii Modem warning notice Conformity Statement The equipment has been approved to [Council Decision 98/482/EC - "TBR 21"] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN).However, due to differences between the individual PSTNs provided...

viii User’s Manual Japan regulations Region selection If you are using the computer in Japan, technical regulations described in the Telecommunications Business Law require that you select the Japan region mode. It is illegal to use the modem in Japan with any other selection. Redial Up to two redia...

User’s Manual ix Telephone company procedures The goal of the telephone company is to provide you with the best service it can. In order to do this, it may occasionally be necessary for them to make changes in their equipment, operations, or procedures. If these changes might affect your service or ...

x User’s Manual Instructions for IC CS-03 certified equipment 1. The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Eq...

User’s Manual xi Notes for Users in Australia and New Zealand Modem warning notice for Australia Modems connected to the Australian telecoms network must have a valid Austel permit. This modem has been designed to specifically configure to ensure compliance with Austel standards when the country/reg...

xii User’s Manual Notes for use of this device in New Zealand ■ The grant of a Telepermit for a device in no way indicates Telecom acceptance of responsibility for the correct operation of that device under all operating conditions. In particular the higher speeds at which this modem is capable of o...

User’s Manual xiii ■ When used in the Auto Answer mode, the S0 register must be set with a value of 3 or 4. This ensures: ■ a person calling your modem will hear a short burst of ringing before the modem answers. This confirms that the call has been successfully switched through the network. ■ calle...

xiv User’s Manual The charge for a Telepermit assessment is $337.50. An additional charge of $337.50 is payable where an assessment is based on reports against non-Telecom New Zealand Specifications. $112.50 is charged for each variation when submitted at the same time as the original.An invoice for...

User’s Manual xv Visit http://www.energystar.gov or http://www.energystar.gov/power management for more information regarding the ENERGY STAR Program. Optical disc drive safety instructions Panasonic DVD Super Multi UJ-870B/870F Be sure to check the international precautions at the end of this secti...

xvi User’s Manual Panasonic DVD Super Multi DVR-KD08 ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service locati...

User’s Manual xvii TOSHIBA SAMSUNG STORAGE TECHNOLOGY 8x slim DVD Writable Drive TS-L632H ■ THIS DVD WRITABLE DRIVE EMPLOY A LASER SYSTEM TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY AND RETAINFOR FUTURE REFERENCE. SHOULD THE UNIT EVER REQUIRE MAINTENANCE, CONT...

xviii User’s Manual TOSHIBA HD DVD-ROM Drive SD-L802B ■ THIS DVD WRITABLE DRIVE EMPLOY A LASER SYSTEM TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY AND RETAINFOR FUTURE REFERENCE. SHOULD THE UNIT EVER REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-S...

xx User’s Manual International Precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model,...

xxii User’s Manual Important Notice Copyrighted works including, but not limited to music, video, computer program, databases are protected by copyright laws. Unless specifically permitted under applicable copyright laws, you cannot copy, modify, assign, transmit or otherwise dispose of any copyrigh...

User’s Manual xxiii General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.Be certain to read the general p...

xxiv User’s Manual Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if yo...

User’s Manual xxv Table of Contents Preface Manual contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxiConventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxii Abbreviations . . . . . . . . . . . . . . . . . ...

xxvi User’s Manual About the HD DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10Writable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11CDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

xxviii User’s Manual LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-37 LAN cable types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-37Connecting LAN cable . . . . . . . . . . . . . . . . . . . . . . . ....

User’s Manual xxix Chapter 7 HW Setup Accessing HW Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1HW Setup Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 Chapter 8 Optional Devices ExpressCard Slot . . . . . . . . . . ...

User’s Manual xxxi Preface Congratulations on your purchase of the TOSHIBA Satellite M300/L310, Satellite Pro M300/L310 Series computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-perfor...

xxxii User’s Manual Preface Chapter 4, Operating Basics , includes instructions on using the following devices: TouchPad, Sound System, optical media drives, modem, wireless communication and LAN. It also provides tips on care of the computer, and CD/DVDs. Chapter 5, The Keyboard , describes special...

User’s Manual xxxiii Preface Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign ( + ). For example, Ctrl + C means you must hold down Ctrl and at the same time press C . If three keys are used,...

User’s Manual 1-1 Chapter 1 Introduction This chapter provides an equipment checklist, and it identifies the computer's features, options and accessories. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use. Hardware Check to make sure you have all t...

1-2 User’s Manual Introduction Software Microsoft ® Windows Vista™ The following software is preinstalled: ■ Microsoft ® Windows Vista™ ■ Microsoft Internet Explorer ■ TOSHIBA Value Added Package ■ TOSHIBA Hardware Setup ■ TOSHIBA Supervisor Password ■ TOSHIBA Assist ■ TOSHIBA ConfigFree ■ TOSHIBA D...

User’s Manual 1-3 Introduction Features Please visit your region’s web site for the configuration details of the model that you have purchased. Processor Memory Built-in Depend on the model you purchased.Please visit your region’s website for the configuration details of the model that you have purc...

1-4 User’s Manual Introduction Power Disks Battery Pack Your computer is powered by a rechargeable lithium-ion battery pack. RTC Battery The internal RTC battery backs up the Real Time Clock and calendar. AC Adaptor The universal AC adaptor provides power to the system and recharges the batteries wh...

User’s Manual 1-5 Introduction DVD Super Multi drive (Supporting DVD±R DL) Some models are equipped with a full-size DVD Super Multi drive module that lets you record data to rewritable CD/DVDs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adaptor. It reads DVD-R...

1-8 User’s Manual Introduction Keyboard Pointing Device Ports Built-In 14.1" WXGA CSV with 1280 horizontal × 800 vertical pixels. Graphics Controller Graphics controller maximizes display performance. Refer to Display Controller and Modes section in Appendix B, Display Controller and Modes for m...

User’s Manual 1-9 Introduction Slots Multimedia ExpressCard Slot The ExpressCard slot that can accommodate two standard module formats; an ExpressCard/34 module and an ExpressCard/54 module. An ExpressCard module is a small add-in card technology based on the PCI Express and Universal Serial Bus (US...

1-10 User’s Manual Introduction Communications Modem The internal modem feature is not available on all models. Where present, it provides capability for data and fax communication. It supports V.90 (V.92). The speed of data transfer and fax communication depends on the analog telephone line conditi...

User’s Manual 1-11 Introduction Security Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Bluetooth Some computers in this series are equipped with Bluetooth functions. Bluetooth wireless technolo...

1-12 User’s Manual Introduction HDD Automatic Power Off *1 This feature automatically cuts off power to the hard disc drive when it is not accessed for a specified time. Power is restored when the hard disc is accessed. This can be specified in the Power Options. System Automatic Sleep Mode/Hibernat...

User’s Manual 1-13 Introduction TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. *1 Click , Control Panel , System and Maintenance , and then click Power Options . TOSHIBA Power Saver TOSHIBA Power Saver provides you with the features o...

1-14 User’s Manual Introduction Utilities and Applications This section describes pre-installed utilities and tells how to start them. For details on operations, refer to each utility’s online manual, help files or readme.txt files. TOSHIBA Assist TOSHIBA Assist is a graphical user interface that pr...

User’s Manual 1-17 Introduction Options You can add a number of options to make your computer even more powerful and convenient to use. Refer to Chapter 8 Optional Devices , for details. The following options are available: Memory expansion Two memory modules can be installed in this computer. Use o...

User’s Manual 2-1 Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The following figure shows the computer's front with its display panel in the closed position...

User’s Manual 2-3 The Grand Tour Left side The following figure shows the computer's left side. The left side of the computer Cooling Vents External Monitor Port Microphone Jack USB Ports Headphone ( S/P DIF ) Jack HDMI ExpressCard Slot i.LINK (IEEE1394a) Port External Monitor Port This 15-pin port ...

2-4 User’s Manual The Grand Tour Right side The following figure shows the computer's right side. The right side of the computer * The figure shows FM Antenna Jack. Universal Serial Bus (USB 2.0) ports Universal Serial Bus port which comply to the USB 2.0 standard, are provided. The ports with the i...

User’s Manual 2-5 The Grand Tour Backside The following figure shows the computer's back panel. The backside of the computer LAN Jack This jack lets you connect to a LAN. The adaptor has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per seco...

2-6 User’s Manual The Grand Tour Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. The underside of the computer Battery Pack Battery Release Latch Cooling Vents Battery Pack Lock Hard Disk Cover Memory Module and W...

User’s Manual 2-7 The Grand Tour Front with the display open This section shows the front of the computer with the display open. Refer to the appropriate illustration for details. To open the display, lift the front of the display. Position the display at a comfortable viewing angle. The front of th...

User’s Manual 2-9 The Grand Tour Optical Disc Drive An ATAPI interface controller is used for optical disc operation. When the computer is accessing a optical disc, an indicator on the drive glows. Region codes for DVD drive and media Optical disc drive and their associated media are manufactured ac...

2-10 User’s Manual The Grand Tour About the HD DVD This section describes the features, use of HD DVD and HD DVD Media. Summary HD DVD allows users to enjoy video, concerts and other packaged content by taking advantage of its large amount of storage space and high-quality audio and video. HD DVD al...

User’s Manual 2-11 The Grand Tour ■ Dolby Digital audio enhancements are only supported by Microsoft ® Windows ® operating system. Content with high sample rates of 48kHz or more are downsampled when output through either the built-in speakers or headphone jack. ■ This device supports AACS (Advanced...

2-12 User’s Manual The Grand Tour DVD Super Multi drive (Supporting DVD±R DL) The full-size DVD Super Multi drive module lets you record data to writable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. HD DVD ROM drive The full-size HD DVD ROM dr...

2-14 User’s Manual The Grand Tour AC adaptor The AC adaptor converts AC power to DC power and reduces the voltage supplied to the computer. It can automatically adjust to any voltage from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use the computer in almost any cou...

User’s Manual 2-15 The Grand Tour Remote controller A remote controller, which is provided with some models, enables you to perform some functions of your computer from a distant location.You can use your remote controller with Media Center to play CDs, DVDs and videos, to view pictures.The remote c...

User’s Manual 2-17 The Grand Tour Using the remote controller Some computers include a remote control unit, which allows you to control some of your computer’s functions from a distant location. Operational range of the remote controller Point the remote controller at your computer and press a butto...

User’s Manual 2-19 The Grand Tour Installing/Removing batteries Be sure to install the provided CR2016 type batteries before using the remote controller. The procedures for installing and removing the batteries vary depending on the type of the remote controller. Check the type and then install or r...

2-20 User’s Manual The Grand Tour Installing the batteries 1. Open the battery cover on the back side of the remote controller. Opening the battery cover 2. Be sure to place the batteries with correct polarities. Press the battery down to the stopper then push it forward to fit into the battery case...

User’s Manual 2-21 The Grand Tour Slim size remote controller 1. Open the battery cover on the back side of the remote controller.2. Hold down the stopper and slide the battery out of battery case. Removing the batteries 3. Insert the battery in place. Be sure to place the batteries with correct pol...

User’s Manual 3-1 Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Installing the battery pack ■ Connecting the AC adaptor ■ Opening the display ■ Turning on the power ■ Windows Vista™ setup ■ Turning off the ...

3-2 User’s Manual Getting Started Installing the battery pack To install a battery, follow the steps below. 1. Turn the computer's power off. 2. Disconnect all cables connected to the computer. 3. Insert the battery pack. The Battery Release Latch clicks into place.4. Secure the Battery Pack Lock to...

User’s Manual 3-3 Getting Started Connecting the AC adaptor Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power. The AC ad...

3-4 User’s Manual Getting Started 2. Connect the AC adaptor's DC output plug to the DC IN 19V jack on the back of the computer. Connecting the adaptor to the computer 3. Plug the power cord into a live wall outlet. Opening the display The display panel can be rotated in a wide range of angles for op...

User’s Manual 3-5 Getting Started Turning on the power This section describes how to turn on the power. Press and hold the computer's power button for two or three seconds. Turning on the power Windows Vista™ setup When you first turn on the power, the computer's initial screen is the Microsoft ® Wi...

3-6 User’s Manual Getting Started Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Sleep Mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode no data is saved and the computer will boot to the operating system...

User’s Manual 3-7 Getting Started Benefits of Sleep Mode The Sleep Mode feature provides the following benefits: ■ Restores the previous working environment more rapidly than does Hibernation Mode. ■ Saves power by shutting down the system when the computer receives no input or hardware access for t...

3-8 User’s Manual Getting Started Sleep Mode limitations Sleep Mode will not function under the following conditions: ■ Power is turned back on immediately after shutting down. ■ Memory circuits are exposed to static electricity or electrical noise. Hibernation Mode The hibernation feature saves the...

User’s Manual 3-9 Getting Started Automatic Hibernation Mode The computer will enter Hibernation mode automatically when you press the power button or close the Display Screen. First, however, make the appropriate settings according to the steps below. 1. Open the Control Panel . 2. Open System and ...

3-10 User’s Manual Getting Started System Recovery Options About 1.5GB hidden partition is allocated on the hard drive for the System Recovery Options. System Recovery Options The System Recovery Options feature is installed on the hard disk when shipped from the factory. The System Recovery Options...

User’s Manual 3-11 Getting Started 3. Turn on your computer to open Windows Vista.4. Insert the (first) blank media into the tray of the Optical Drive.5. Double Click the Recovery Disc Creator icon on the Windows Vista desktop, or select the application from Start menu. 6. After TOSHIBA Recovery Dis...

3-12 User’s Manual Getting Started Restoring the preinstalled software from Recovery Media If the preinstalled files are damaged, use the Recovery Media you created, or HDD recovery to restore them. To restore the operating system and all preinstalled software, follow the steps below. 1. Load the Re...

User’s Manual 4-1 Chapter 4 Operating Basics This chapter gives information on basic operations including using the TouchPad, optical media drives, sound system, modem, the wireless LAN and LAN. It also provides tips on caring for your computer. Using the TouchPad To use the TouchPad, simply touch a...

4-2 User’s Manual Operating Basics For some functions, you can tap the TouchPad instead of pressing a control button. Using the fingerprint sensor This product has a fingerprint utility installed for the purpose of enrolling and recognizing fingerprints. By enrolling the ID and password to the finge...

User’s Manual 4-3 Operating Basics How to swipe the finger Using the following steps when swiping fingers for fingerprint registration or authentication will help to minimize authentication failures:1. Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swip...

4-4 User’s Manual Operating Basics Points to note about the fingerprint sensor Failure to follow these guidelines might result in (1) damage to the sensor or cause sensor failure, (2) finger recognition problems, or lower finger recognition success rate. ■ Do not scratch or poke the sensor with your...

User’s Manual 4-5 Operating Basics ■ The fingerprint for each finger is different and unique. Please ensure that only the registered or enrolled fingerprint or fingerprints are used for identification. ■ Check sliding position and speed. ■ Fingerprint data is enrolled up to 30~34. ■ Fingerprint data...

4-6 User’s Manual Operating Basics Points to note about the fingerprint utility ■ If Windows Vista™’s file encryption function EFS (Encryption File System) is used to encrypt a file, the file cannot be further encrypted using the encryption function of this software. ■ You can back up the fingerprin...

User’s Manual 4-7 Operating Basics 7. In case of finger injury or authentication failure, it is recommended that another fingerprint also be enrolled. The following message will be displayed: [We recommended enrolling at least two fingerprint images.] Click OK and repeat steps 3, 4, 5 and 6 with ano...

4-8 User’s Manual Operating Basics How to enable fingerprint system boot authentication settings It is necessary to first enroll your fingerprint with the TrueSuite Access Maganer application prior to enabling and configuring the fingerprint Pre- OS feature.Check that your fingerprint is enrolled be...

User’s Manual 4-9 Operating Basics How to enable fingerprint Single Sign-On feature It is necessary to first enroll your fingerprint with the TrueSuite Access Maganer application prior to enabling and configuring the fingerprint Single Sign-On feature. Check that the fingerprint is enrolled before c...

4-10 User’s Manual Operating Basics How to enable/disable USB sleep and charge function You can set enable/disable USB sleep and charge function in HW setup Refer to the USB Sleep and Charge function in Chapter 7 HW Setup . ■ The “USB Sleep and Charge function” only works for compatible ports. This ...

User’s Manual 4-11 Operating Basics Using the Web Camera This section describes the bundled webcam utility, which can capture still and video images. The web camera will auto-run when Windows starts. * Provided with some models Using the software The web camera software is pre-configured to start wh...

User’s Manual 4-13 Operating Basics Using the microphone Your computer has a built-in microphone that can be used to record monaural sounds into your applications. It can also be used to issue voice commands to applications that support such functions.(Built-in microphone is provided with some model...

4-14 User’s Manual Operating Basics Loading discs To load a disc, follow the steps below and refer to the figures. 1. a. When the power is on, press the eject button to open the drawer slightly. Pressing the eject button Eject Button

User’s Manual 4-15 Operating Basics b. Pressing the eject button will not open the drawer when the disc drive's power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject ...

4-16 User’s Manual Operating Basics 3. Place the disc, label side up, in the drawer. Inserting a disc 4. Press gently at the centre of the disc until you feel it click into place. The disc should lie below the top of the spindle, flush with the spindle base. 5. Push the center of the drawer to close...

User’s Manual 4-17 Operating Basics Closing the disc drawer Removing discs To remove the disc, follow the steps below and refer to the figure. 1. To pop the drawer partially open, press the eject button. Gently pull the drawer out until it is fully opened. Do not press the eject button while the com...

4-18 User’s Manual Operating Basics 2. The disc extends slightly over the sides of the drawer so you can hold it. Hold the disc gently by its edges and lift it out. Removing a disc 3. Push the centre of the drawer to close it. Press gently until it locks into place. Writing CD/DVD/HD DVD with the DV...

User’s Manual 4-19 Operating Basics Before writing or rewriting ■ Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM discs. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc q...

4-20 User’s Manual Operating Basics ■ There are two types of DVD-R discs: authoring and general use discs. Do not use authoring discs. Only general use discs can be written to by a computer drive. ■ We can support only Format1 of DVD-R DL. Therefore you cannot do the additional writing. If your data...

User’s Manual 4-21 Operating Basics When writing or rewriting Please observe/consider the following when you write or rewrite to a CD-R/ -RW, DVD-R/-RW/-RAM or DVD+R/+RW disc. ■ Do not perform any of the following actions when writing or rewriting: ■ Change users in the Windows ® Vista operating sys...

4-22 User’s Manual Operating Basics Writing CD/DVD/HD DVDs on HD DVD-RW drives You can use the HD DVD-RW drive to write data to either CD-R or CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD-RAM, HD DVD-R, HD DVD-R (Dual layer) discs. This computer is provided with TOSHIBA...

User’s Manual 4-23 Operating Basics Legal Footnotes TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW, DVD-RAM. HD DVD-R. HD DVD-R (Dual Layer) or HD DVD-RW disc that may be caused by writing or...

User’s Manual 4-27 Operating Basics TOSHIBA Disc Creator Note the following limitations when you use TOSHIBA Disc Creator: ■ DVD-Video cannot be created using TOSHIBA Disc Creator. ■ DVD-Audio cannot be created using TOSHIBA Disc Creator. ■ You cannot use TOSHIBA Disc Creator’s ‘Audio CD for Car or ...

4-28 User’s Manual Operating Basics ■ When you back up a DVD disc, be sure that the source drive supports recording to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW media - if this is not the case then the source disc might not be backed up correctly. ■ When you back up a ...

User’s Manual 4-29 Operating Basics How to make a DVD-Video Simplified steps for making a DVD-Video from video data captured from a DV-Camcorder: 1. Click Æ All Programs Æ DVD MovieFactory for TOSHIBA Æ Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 2. Insert a DVD-RW or DVD...

4-30 User’s Manual Operating Basics Important information for use Note the following limitations when you write Video DVD:1. Editing digital video ■ Log in with Administrator rights to use DVD MovieFactory. ■ Make sure that your computer is running on AC power when using DVD MovieFactory. ■ Operate ...

User’s Manual 4-31 Operating Basics 3. About Straight to Disc ■ Not support to record on DVD-R/+R disc ■ Not support to record DVD+VR format by HDV ■ HDV support to burn DVD-Video only ■ DVD-VR format not support to add Menu 4. About recorded DVDs ■ Some DVD-ROM drives for personal computers or othe...

4-32 User’s Manual Operating Basics Region selection Telecommunication regulations vary from one region to another, so you will need to make sure the internal modem's settings are correct for the region in which it will be used. To select a region, follow the steps below. 1. Click start , point to A...

User’s Manual 4-33 Operating Basics Location list for region selection. A submenu appears displaying location information for telephony. Open dialog box, if the modem and Telephony Current Location region code do not match. A warning dialog box is displayed if current settings for region code and te...

4-34 User’s Manual Operating Basics Connecting the internal modem Disconnecting To disconnect the internal modem cable, follow the steps below. 1. Pinch the lever on the connector in the telephone jack and pull out the connector. 2. In the same way, pull the cable’s other connector out of the comput...

User’s Manual 4-35 Operating Basics Using the FM tuner The availability of this feature is depending on the model you purchased.1. Plug the FM tuner antenna into the FM Antenna jack. Plug FM tuner antenna into the jack Select Start Æ All Programs Æ FM Tuner Utility to start FM software. Wireless com...

4-36 User’s Manual Operating Basics Wireless LAN The Wireless LAN feature is not available on all models. Where present, it supports the A,B, G and draft N standards but it is compatible with other LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio ...

User’s Manual 4-37 Operating Basics Bluetooth Stack for Windows by TOSHIBA (depends on the model purchased) Please note that this software is specifically designed for the following operating systems: ■ Microsoft ® Windows Vista™ Detailed information regarding the use with these operating systems is...

4-38 User’s Manual Operating Basics If you used the Task Bar to disable Wireless LAN, you will need to restart the computer to re-enable it. Alternatively, you can also follow this procedure:1. In the Control Panel , click System and Maintenance . 2. Click the Device Manager . The Device Manager win...

User’s Manual 4-39 Operating Basics Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub. Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connector in ...

4-40 User’s Manual Operating Basics Moving the computer The computer is designed for rugged durability. However, a few simple precautions taken when moving the computer will help ensure trouble-free operation. ■ Make sure all disk activity has ended before moving the computer. Check the HDD indicato...

User’s Manual 5-1 Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/re...

5-2 User’s Manual The Keyboard F1 ... F12 function keys The function keys (not to be confused with Fn ) are the 12 keys at the top of your keyboard. These keys function differently from other keys. F1 through F12 are called function keys because they execute programmed functions when pressed. Used i...

User’s Manual 5-3 The Keyboard Press Fn + F11 to access the integrated keypad. When activated, the keys with gray markings on the bottom edge become numeric keypad keys. Refer to the Keypad overlay section in this chapter for more information on how to operate these keys. The power on default for bo...

User’s Manual 5-5 The Keyboard TOSHIBA Zooming Utility (enlarge): Increases the icon size on the desktop or the font size within one of the supported application windows. Fn Sticky key (Depends on the model you purchased) You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that ...

5-6 User’s Manual The Keyboard Keypad overlay Your computer's keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one. The keys in the centre of the keyboard with gray letters make up the numeric keypad overlay. The overlay provides the same functions ...

User’s Manual 5-7 The Keyboard Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold Fn and press any other key. All keys will operate as if the overlay were off. 2. Type upper-case characters b...

User’s Manual 6-1 Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up mod...

6-2 User’s Manual Power and Power-Up Modes Power indicators As shown in the above table, the Battery . Power indicators on the system indicator alert you to the computer’s operating capability and battery charge status. Battery indicator Check the Battery indicator to determine the status of the bat...

User’s Manual 6-3 Power and Power-Up Modes Power indicator Check the Power indicator to determine the power status: Battery types The computer has the following batteries: ■ Battery pack ( 3cell, 6cell, or 9cell depending on the model.) ■ Real Time Clock (RTC) battery Battery pack When the AC adapto...

6-4 User’s Manual Power and Power-Up Modes Battery pack To ensure that the battery pack maintains its maximum capacity, operate the computer on battery power at least once a month until the battery pack is fully discharged. Refer to Extending battery life in this chapter for procedures. If the compu...

User’s Manual 6-5 Power and Power-Up Modes The charge in the RTC battery is getting low or has been exhausted. You will need to set the date and time within the BIOS setup using the following steps: 1. Press F2 key - the BIOS setup screen will be displayed. 2. Set the date in System Date . 3. Set th...

6-6 User’s Manual Power and Power-Up Modes Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this se...

User’s Manual 6-7 Power and Power-Up Modes 8. Never expose the battery pack to abnormal shock, vibration or pressure. The battery pack’s internal protective device will fail, causing it to overheat, explode, ignite or leak caustic liquids possibly resulting in death or serious injury. 9. Never let a...

6-8 User’s Manual Power and Power-Up Modes 6. Be sure to monitor the remaining battery power. If the battery pack and real time clock battery discharge completely, Sleep Mode will not function and data in memory will be lost. Also, the computer might register an incorrect time and date. In this case...

User’s Manual 6-9 Power and Power-Up Modes Time The following table shows the approximate time required to fully charge a discharged battery. Battery charging notice The battery may not charge right away under the following conditions: ■ The battery is extremely hot or cold. If the battery is extrem...

6-10 User’s Manual Power and Power-Up Modes Monitoring battery capacity Remaining battery power can be monitored using the following methods. ■ Clicking the battery icon on the task bar ■ Via the Windows Mobility Center window Maximizing battery operating time A battery’s usefulness depends on how l...

User’s Manual 6-11 Power and Power-Up Modes Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods. Extending battery life To maximize the life of your battery pack: ■ At least once a month, dis...

6-12 User’s Manual Power and Power-Up Modes Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one. The life of the battery pack is generally about 500 recharges. If the Battery indicator flashes orange shortly after fully recharging...

User’s Manual 6-13 Power and Power-Up Modes Installing the battery pack To install a battery, follow the steps below. 1. Turn the computer's power off. 2. Disconnect all cables connected to the computer. 3. Insert the battery pack. 4. Ensure the battery pack lock is moved into its locked position. S...

6-14 User’s Manual Power and Power-Up Modes or if availableSwipe your fingerprint on the sensor if you have already registered the fingerprint with the Fingerprint utility and enabled Fingerprint Power on Security . If you would not like to swipe your finger or cannot authenticate the fingerprint fo...

User’s Manual 7-1 Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer. TOSHIBA HW Setup lets you configure settings for General, Password, Display, Boot Priority, Keyboard, LAN, and USB. Accessing HW Setup To run HW Setup, click , All Programs , TO...

7-2 User’s Manual HW Setup Password This tab allows you to set or reset the user password for power on. User Password Lets you register a new password or un-register an existing password. Owner String This blank field is used to display a message when the password field is displayed on startup. If a...

User’s Manual 7-3 HW Setup Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in Sleep Mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in Sleep Mode. USB USB Keyboard/Mouse/FDD Legacy Emul...

User’s Manual 8-1 Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memory ■ ExpressCard ■ SD (Secure Digital) / SDHC ...

8-2 User’s Manual Optional Devices ExpressCard Slot The computer is equipped with an ExpressCard slot that can accommodate one ExpressCard. Inserting an ExpressCard One ExpressCard connector is located on the left side of the computer.The computer's hot-install feature lets you install ExpressCard w...

User’s Manual 8-3 Optional Devices Removing an ExpressCard To remove the ExpressCard, follow the steps below.1. Click the Safety Remove Hardware icon on the Task Bar. 2. Click the ExpressCard you want to remove.3. Press the ExpressCard once to extend it.4. Grasp the extended ExpressCard, and remove ...

8-4 User’s Manual Optional Devices SD/SDHC/MMC/MEMORY STICK / MEMORY STICK PRO/xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/SDHC/MMC/MEMORY STICK/ MEMORY STICK PRO/ xD memory cards. These memory cards let you easily transfer data from devic...

User’s Manual 8-5 Optional Devices Installing a memory card To install a memory card:1. Insert the memory card.2. Press gently to ensure a firm connection. Inserting a memory card Removing a memory card To remove a memory card, follow the steps below:1. Click the Safely Remove Hardware icon on the T...

8-6 User’s Manual Optional Devices Memory card care 1. Do not write to a memory card if the battery power is low. Low power could affect writing accuracy. 2. Do not remove a memory card while read/write is in progress.3. The memory card is designed so that it can be inserted only one way. Do not try...

User’s Manual 8-7 Optional Devices Memory expansion You can install additional memory in the computer's memory module socket to increase the amount of RAM. This section describes how to install and remove a memory module. Installing a memory module Follow the steps below to install a memory module. ...

8-8 User’s Manual Optional Devices Removing the memory module cover 6. Lift one side of the insulator sheet and fit the module's connectors into the computer's connectors at about a 45 degree angle. Press the module carefully to ensure a firm connection. 7. Push the module down so it lies flat. Latc...

User’s Manual 8-9 Optional Devices 8. Seat the cover and secure it with the screws. 9. Replace the battery pack as described in Chapter 6, Power and Power- Up Modes . 10. Turn the power on and make sure the added memory is recognized. Open System in the Control Panel and click the General tab. Point...

8-10 User’s Manual Optional Devices Removing the memory module 6. Seat the cover and secure it with screws and replace the battery pack. Additional battery pack You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source and your battery run...

User’s Manual 8-11 Optional Devices External monitor An external analog monitor can be connected to the external monitor port on the computer. The computer supports several video modes. Refer to Appendix B, Display Controller and Modes . To connect a monitor, follow the steps below. 1. Turn the comp...

8-12 User’s Manual Optional Devices 2. Plug the other end of the HDMI cable into the HDMI out port on your computer. Setting for display video on HDMI To view video on the HDMI device, be sure to configure the following settings otherwise you may find that nothing is displayed. Settings for audio on...

User’s Manual 8-13 Optional Devices Precautions 1. Make a back-up of your data before transferring it to the computer. There is a possibility that the original data will be damaged. There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no ...

8-14 User’s Manual Optional Devices Disconnecting 1. Open the Safety Remove Hardware icon on the Task Bar. 2. Point to i.LINK (IEEE1394) device and click. 3. Disconnect the cable from the computer then from the i.LINK device. Security lock Security locks enable you to anchor your computer to a desk ...

User’s Manual 9-1 Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent probl...

9-2 User’s Manual Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer. This includes your printer...

User’s Manual 9-3 Troubleshooting Hardware and system checklist This section discusses problems caused by your computer's hardware or attached peripherals. Basic problems may occur in the following areas: System start-up When the computer does not start properly, check the following items: ■ Self Te...

9-4 User’s Manual Troubleshooting Self test When the computer starts up, the self test will be run automatically, and the following will be displayed: This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on h...

User’s Manual 9-5 Troubleshooting AC power If you have trouble turning on the computer with the AC adaptor connected, check the Battery indicator. Refer to Chapter 6, Power and Power-Up Modes for more information. Battery If you suspect a problem with the battery, check the Battery indicator. For in...

9-6 User’s Manual Troubleshooting Disposing of PC and PC batteries ■ Discard this PC in accordance with applicable laws and regulations. For further information, contact your local government. ■ This PC contains rechargeable batteries. After repeated use, the batteries will finally lose their abilit...

User’s Manual 9-7 Troubleshooting ■ Reformatting the media ■ Reinstalling an operating system from the recovery CD-ROMThe procedures above delete only the initial part of the data used for file management. This makes the file invisible to the operating system, but the data can still be read by speci...

9-8 User’s Manual Troubleshooting LCD panel Apparent LCD problems may be related to the computer's setup. Hard disk drive Problem Procedure No display Press hot keys Fn + F5 to change the display priority, to make sure it is not set for an external monitor. Problems above remain unresolved or other ...

User’s Manual 9-9 Troubleshooting Recovery Discs DVD Super Multi drive (Supporting DVD±R DL) For more information, refer to Chapter 4, Operating Basics . Problem Procedure The following message appears when executing Recovery Disc Creator."The Recovery Disc Creator can not be launched because th...

User’s Manual 9-15 Troubleshooting Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. TouchPad Problem Procedure On-screen pointer does not respond to Pad operation The system might be busy. If the pointer is shaped as an hour...

9-16 User’s Manual Troubleshooting USB mouse USB Also refer to your USB device’s documentation. Problem Procedure On-screen pointer does not respond to mouse operation The system might be busy. If the pointer is shaped as an hourglass, wait for it to resume its normal shape and try again to move it....

User’s Manual 9-17 Troubleshooting USB Sleep and Charge function Problem Procedure I cannot use the “USB Sleep and Charge function”. The setting of “USB Sleep and Charge function” may be [Disabled]. Change the setting to [Enabled] in the HW Setup. When there is a current overflow of the external dev...

9-18 User’s Manual Troubleshooting Memory expansion Refer also to Chapter 8, Optional Devices , for information on installing memory modules. Sound system Refer also to documentation for your audio devices. External devices connected to the compatible ports do not work when connected to a compatible...

User’s Manual 9-19 Troubleshooting Monitor Refer also to Chapter 8, Optional Devices , and to your monitor’s documentation. Modem Problem Procedure No sound is heard Check the software volume settings. Make sure the headphone connection is secure. If problems persist, contact your dealer. Problem Pr...

9-22 User’s Manual Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software...

User’s Manual A-1 Appendix A Specifications This appendix summarizes the computer's technical specifications. Environmental Requirements Power Requirements Built-in Modem Operating Non-operating Ambient temperature 5°C to 35°C -20°C to 60 °C Relative humidity 20% to 80% 10% to 90% Altitude (from sea...

A-2 User’s Manual Specifications Communication specifications Communication System Data: Full duplex Fax: Half duplex Communication protocol Data ITU-T-Rec (Former CCITT) BellFax: ITU-T-Rec (Former CCITT) V.21/V.22/V.22bis/V.32/ V.32bis/V.34/V.90/V.92103/212A V.17/V.29/V.27ter/V.21 ch2 Communication...

User’s Manual B-1 Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular pels on or off.The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Ar...

B-2 User’s Manual Display Controller and Modes Video modes The computer supports video modes defined in the table below. If your application offers a selection of mode numbers that do not match the numbers on the table, select a mode based on, resolution, number of colors and refresh rates. 1. Only ...

User’s Manual C-1 Appendix C Wireless LAN Card Specifications Form Factor Mini PCI TypeIII Compatibility ■ IEEE 802.11 Standard for Wireless LANs ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The "Wi-Fi CERTIFIED" logo is a certification mark of the Wi-Fi Alliance. Network Ope...

C-2 User’s Manual Wireless LAN Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking pro...

User’s Manual C-3 Wireless LAN Supported Frequency Sub-bands Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regu...

User’s Manual D-1 Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Certification...

D-2 User’s Manual AC Power Cord and Connectors In Europe, power cords must be VDE type, H05VVH2-F and two conductor. For the United States and Canada, plug configuration must be a 2-15P (250 V) or 1-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical C...

User’s Manual E-1 Appendix E Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers.Description(s) related to this computer are marked with ...

User’s Manual E-3 Legal Footnotes Battery Life Battery life may vary considerably depending on product model, configuration, applications, power management settings and features utilized, as well as the natural performance variations produced by the design of individual components. Published battery...

E-4 User’s Manual Legal Footnotes Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware conf...

User’s Manual Glossary-1 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AACS: advanced access content system AC: Alternating current ACPI: Advanced Configuration and Power Interface AMT: Intel Active Management Techn...

Glossary-10 User’s Manual Glossary non-system disk: A disk for storing programs and data that cannot be used to start the computer. Compare system disk. nonvolatile memory: Memory that is capable of permanently storing information. Turning the computer’s power off does not alter data stored in nonvo...

User’s Manual Index-1 Index A AC adaptor, 1-4 additional, 1-17connecting, 3-3 ASCII characters, 5-7 B Battery charging, 6-8extending battery life, 6-11indicator, 6-1location, 2-6Monitoring capacity, 6-10real time clock, 1-4, 6-4safety precautions, 6-6save mode, 1-12types, 6-3 Battery pack, 1-4 addit...

Index-2 User’s Manual Index K Keyboard, 1-8, 5-1 emulating keys on enhanced, 5-2 F1 ... F12 function keys, 5-2 hot keys, 5-3typewriter keys, 5-1Windows® special keys, 5-5 Keypad overlay, 1-11, 5-6 numeric mode, 5-6temporarily using normal keyboard (overlay on), 5-7 turning on the overlays, 5-6 L LAN...