Toshiba E2711 - Manuals

Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 5 6) Installing the PnP Touch Panel Driver Select “SMK PnP TABLET ” in the Device Manager, and click on the “Properties” button. On the “SMK PnP TABLET properties” screen, select [General] – [Reinstall Driver] to install the driver. ...

Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 6 IMPORTANT: * Unless any of the PS/2 mouse, the serial mouse, or the USB mouse is used, the touch panel is not detected. When installing the driver, connect any of the mice and let the machine detect the touch panel. * Do not check ...

Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 7 8) Setting up the Dual Display To enable the dual display, carry out this setup. The ST-6500-C7 enables the dual display using the Dual Display functions supported by Windows. Select [Display] on the Control Panel to display the “D...

Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 9 9) Cautions of dual-screen use by Windows98 and Windows98SE. If a dual-screen is set up by Windows 98 and Windows 98SE, an error may occur. iIn order to set up a dual-screen without generating an error, please set up the follows; S...

Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 11 3. Setup on Windows NT 4.0 1) Setting up BIOS By pressing the F2 key on the keyboard when the machine starts up, the BIOS Setup Menu is selected. Select the following item for BIOS setup. [Exit]-> Load Setup Defaults (DOS/WinNT...

Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 12 Click on the “Select from list” button, and select the extracted folder to install the driver. For the detailed installation procedure, refer to Intel’s documents or online help. IMPORTANT: * If a LAN -related component is install...

Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 13 5) Installing the SM712 Graphic Driver To use the SM712 VGA board (SMI), install this driver. Select [Display] on the Control Panel to display the “Display Properties” screen. On this screen, select [Settings] – [Display Type]. Se...

Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 14 7) Installing the PnP Touch Panel Driver Select [Mouse] on the Control Panel to display the “Mouse Properties” screen. Select [General] – [Change]. Select the “PnPTablet¥WinNT ” fonder in the driver kit to install “SMK PnP Tablet ...

Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 15 4. Setup on Windows 2000 1) Setting up BIOS By pressing the F2 key on the keyboard, when the machine starts up, the BIOS Setup Menu is selected. Select the following item for BIOS setup. [Exit]-> Load Setup Defaults (Win2000/XP...

Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 18 5) Changing the Serial Port Setting On Windows 2000, COM4 is recognized as if there are two. Therefore, either of them must be changed from COM4 to COM5 (SIO1). IMPORTANT: * No additional operation for the SIO1 port is required, s...

Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 19 7) Setting up the Dual Display Refer to 8) Setting up the Dual Display of Section 2. Setup on Windows 98/Windows 98SE. IMPORTANT: * On Windows 2000/XP, when the mouse pointer is moved on the screen of MPEG data on the CRT monitor ...

Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 21 5. Setup on Windows XP 1) Setting up BIOS By pressing the F2 key on the keyboard when the machine starts up, the BIOS Setup Menu is selected. Select the following item for BIOS setup. [Exit]-> Load Setup Defaults (Win2000/XP) 2...

Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 23 Reboot the machine. Select [Control Panel] – [Touch Panel] to display the “Touch Panel Property” screen. On this screen, select [Calibration] – [Execute] to set up calibration. IMPORTANT: * Unless any of the PS/2 mouse, the serial...