Page 2 - TOSHIBA TEC CORPORATION
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 1 1. Introduction This setup guide describes the procedure and notes for installing the drivers on the ST-6500/ST-6500-C7. The procedure outline to set up the OS for the ST-6500/ST-6500-C7 is described below. Some drivers supported b...
Page 4 - PRO/100 VE Network Connection” to install the driver.
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 3 The following screen appears. Select “Reinstall Driver” to install the driver. Select the folder to extract 100pdisk.exe to, as the folder containing the driver to be installed. Select “Intel ® PRO/100 VE Network Connection” to ins...
Page 5 - ) Installing the SM712 Graphic Driver
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 4 4) Installing the SM712 Graphic Driver Select [Display] on the Control Panel and display the “Display Properties” screen. On this screen, select [Settings] – [Advanced] to display the “Standard PCI Graphics Adapter Properties” scre...
Page 6 - ) Installing the PnP Touch Panel Driver
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 5 6) Installing the PnP Touch Panel Driver Select “SMK PnP TABLET ” in the Device Manager, and click on the “Properties” button. On the “SMK PnP TABLET properties” screen, select [General] – [Reinstall Driver] to install the driver. ...
Page 7 - * Do not check the “Beep when touched” checkbox on the Sound tab page.; ) Changing the Serial Port Setting
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 6 IMPORTANT: * Unless any of the PS/2 mouse, the serial mouse, or the USB mouse is used, the touch panel is not detected. When installing the driver, connect any of the mice and let the machine detect the touch panel. * Do not check ...
Page 8 - ) Setting up the Dual Display
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 7 8) Setting up the Dual Display To enable the dual display, carry out this setup. The ST-6500-C7 enables the dual display using the Dual Display functions supported by Windows. Select [Display] on the Control Panel to display the “D...
Page 10 - ) Cautions of dual-screen use by Windows98 and Windows98SE.; And then the following message boxes are displayed, choose Yes.
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 9 9) Cautions of dual-screen use by Windows98 and Windows98SE. If a dual-screen is set up by Windows 98 and Windows 98SE, an error may occur. iIn order to set up a dual-screen without generating an error, please set up the follows; S...
Page 12 - installing Windows NT.
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 11 3. Setup on Windows NT 4.0 1) Setting up BIOS By pressing the F2 key on the keyboard when the machine starts up, the BIOS Setup Menu is selected. Select the following item for BIOS setup. [Exit]-> Load Setup Defaults (DOS/WinNT...
Page 13 - Service control manager
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 12 Click on the “Select from list” button, and select the extracted folder to install the driver. For the detailed installation procedure, refer to Intel’s documents or online help. IMPORTANT: * If a LAN -related component is install...
Page 14 - ) Installing the SM712 Graphic Driver
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 13 5) Installing the SM712 Graphic Driver To use the SM712 VGA board (SMI), install this driver. Select [Display] on the Control Panel to display the “Display Properties” screen. On this screen, select [Settings] – [Display Type]. Se...
Page 15 - ) Installing the PnP Touch Panel Driver
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 14 7) Installing the PnP Touch Panel Driver Select [Mouse] on the Control Panel to display the “Mouse Properties” screen. Select [General] – [Change]. Select the “PnPTablet¥WinNT ” fonder in the driver kit to install “SMK PnP Tablet ...
Page 16 - ) Installing Windows
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 15 4. Setup on Windows 2000 1) Setting up BIOS By pressing the F2 key on the keyboard, when the machine starts up, the BIOS Setup Menu is selected. Select the following item for BIOS setup. [Exit]-> Load Setup Defaults (Win2000/XP...
Page 19 - ) Changing the Serial Port Setting
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 18 5) Changing the Serial Port Setting On Windows 2000, COM4 is recognized as if there are two. Therefore, either of them must be changed from COM4 to COM5 (SIO1). IMPORTANT: * No additional operation for the SIO1 port is required, s...
Page 20 - ) Setting up the Dual Display; level to any level other than “FULL”. This phenomenon will not occur.
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 19 7) Setting up the Dual Display Refer to 8) Setting up the Dual Display of Section 2. Setup on Windows 98/Windows 98SE. IMPORTANT: * On Windows 2000/XP, when the mouse pointer is moved on the screen of MPEG data on the CRT monitor ...
Page 22 - Setup on Windows XP
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 21 5. Setup on Windows XP 1) Setting up BIOS By pressing the F2 key on the keyboard when the machine starts up, the BIOS Setup Menu is selected. Select the following item for BIOS setup. [Exit]-> Load Setup Defaults (Win2000/XP) 2...
Page 24 - ) Installing Other PCI Device Drivers
Windows Setup Guide for ST-6500/ST-6500-C7 TOSHIBA TEC CORPORATION 23 Reboot the machine. Select [Control Panel] – [Touch Panel] to display the “Touch Panel Property” screen. On this screen, select [Calibration] – [Execute] to set up calibration. IMPORTANT: * Unless any of the PS/2 mouse, the serial...