Toshiba 750 - Manuals

4/00, Tecra Toshiba TRR Page 16 Tecra 750 Series Disassembly Overview, (cont.) To disassemble the HDD Pack, follow the stepsbelow. 1. After removing the HDD pack, lift the leftend of the cover up. 2. Slide the cover all the way to the right. 3. Lift the cover up and remove it. 4. Remove four M2.5x6 ...

Toshiba TRR 4/00, Tecra Page 17 Tecra 750 Series Disassembly Overview, (cont.) To assemble the HDD pack, follow the stepsbelow. 1. Connect the flexible cable connectorto the HDD. 2. Seat the HDD into the metal cover andsecure four M3x4 flat-head screws. 3. Connect the connector cover to theflexible ...

Toshiba TRR 4/00, Tecra Page 19 Tecra 750 Series Disassembly Overview, (cont.) To install a modem board, follow the stepsbelow. 1. Place the modem pack and secure theconnector on the modem board toPJ660 on the system board. NOTE: Be sure a plastic insulator tab lies ontop of the green backup battery...

4/00, Tecra Toshiba TRR Page 20 Tecra 750 Series Disassembly Overview, (cont.) To remove the top cover with display assembly,follow the steps below. 1. Turn off the power to the computer.Disconnect the AC adapter and allexternal cables connected to thecomputer. 2. Remove the battery pack, HDD pack,o...

Toshiba TRR 4/00, Tecra Page 21 Tecra 750 Series Disassembly Overview, (cont.) To remove the speakers, follow the steps below. 1. Turn off the power to the computer.Disconnect the AC adapter and allexternal cables connected to thecomputer. 2. Remove the battery pack, HDD pack,optional memory module,...

4/00, Tecra Toshiba TRR Page 22 Tecra 750 Series Disassembly Overview, (cont.) To remove the fan, follow the steps below. 1. Turn off the power to the computer.Disconnect the AC adapter and allexternal cables connected to thecomputer. 2. Remove the battery pack, HDD pack,optional memory module, mode...

Toshiba TRR 4/00, Tecra Page 23 Tecra 750 Series Disassembly Overview, (cont.) To install the middle frame, follow the stepsbelow. 1. Reroute the cables and replace theprobe pin harness. 2. Secure the probe pin harness to themiddle frame with two M2x5 screws. 3. Secure the bracket over the probe pin...

4/00, Tecra Toshiba TRR Page 24 Tecra 750 Series Disassembly Overview, (cont.) To remove the display mask, follow the stepsbelow. 1. Turn off the power to the computer.Disconnect the AC adapter and allexternal cables connected to thecomputer. 2. Remove the battery pack. 3. Remove two rubber seals at...

Toshiba TRR 4/00, Tecra Page 25 Tecra 750 Series Disassembly Overview, (cont.) NOTE: Be careful not to apply pressure tothe ICs along the edge of the LCD module.The ICs are easily damaged. To remove the LCD module, follow the stepsbelow. 1. Turn off the power to the computer.Disconnect the AC adapte...

4/00, Tecra Toshiba TRR Page 26 Tecra 750 Series Disassembly Overview, (cont.) CAUTION: When you remove the FL, becareful not to let any dust or other foreignmatter contaminate the LCD panel. Anycontamination can affect the performance ofthe unit. To remove the FL, follow the steps below. 1. Turn of...