Toshiba 32AV600E - Manuals

5 10) Precautions for installing on outdoor aerial An outside aerial system should not be located in the vicinity of overhead power lines, or other electric light or power circuits.If the aerial falls down or drops, it may cause an injury or an electric shock. Use 1) Never place hot objects or open ...

6 6) Never pull on the power cord when removing the plug from the wall outlet. Always hold the plug fi rmly when removing it. If the power cord is yanked, the cord may become damaged and a fi re or an electric shock may occur. 7) Never cut, break, modify, twist, bunch up or bent the cord or apply ex...

7 Cleaning 1) Remove the power plug before cleaning. Never use solvents such as benzine or thinner to clean the TV.• These solvents may distort the cabinet or damage its fi nish. • If rubber or vinyl products remain in contact with the TV for a long time, a stain may result. If the cabinet becomes d...

8 Connecting an aerial Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used.The exact type and positioning of the aerial will depend upon your particular area.Your Toshiba dealer or service personnel can best advise you on which aerial to use...

9 Getting started TV front and side panel controls • You can operate your TV using the buttons on the bottom of the panel or the remote control. The back and side of the panel provide the terminal connections to connect other equipment to your TV ( - “Connecting your TV” pages 26-31). • For the use ...

10 Getting started 9 A (Aerial input terminal) — Analogue aerial signal input ( - page 8). 10 o RGB/PC (input terminal) — For use when connecting a personal computer (PC) ( - page 29). 11 o HDMI1 (input terminal) — High- Defi nition Multimedia Interface input receives digital audio and uncompressed ...

11 Getting started Learning about the remote control Location of controls 2 1 3 5 4 6 8 7 9 0 CALL TEXT MENU EXIT P P OK CT-90323 • CALL ( - page 13) • Initial/index function for Teletext ( - page 25) Picture still ( - page 17) Sound mute (This button turns off/on the sound.) To return to the previo...

12 Getting started Turning the TV on Switching on the TV Connect the power cord to a wall outlet, the ! power indicator lights in red (standby mode). 1 Press 1 on the remote control or ! on the TV bottom of the panel, the ! power indicator lights in green. Note: If you watch black and white programm...

13 Getting started • If you want to close the menu display instantly, press EXIT . • To return to the previous menu, press MENU . • The U / u function as the Programme position P B / P b when there is no menu display on the screen. • The I / i function as the Volume 2 +/ 2 – when there is no menu di...

14 Getting started Manually setting channels in the channel memory 1 From the SETUP menu, press u or U to select Manual tuning . 2 Press Q to display the Manual tuning menu. Press u or U to select the programme position you want to arrange. 5 4 3 2 1 MENU Back Watch TV EXIT 6 OK Manual tuning P r o ...

15 E. Channel search operation Press U to search up the band or u to search down the band. Press u or U repeatedly until your desired channel is displayed. When a station/satellite is found, it will be displayed. NEVER PRESS ANY OTHER BUTTONS WHILE THE SET IS TUNING. F. MFT (Manual Fine Tuning) Pres...

16 Using the TV’s features Picture adjustment Selecting the picture size 1 Press , the picture size appears on the screen. 2 Press repeatedly to select required picture size directly. Wide Use this setting when watching a wide-screen DVD, widescreen video tape or a 16:9 broadcast (when available). D...

17 Using the TV’s features Native Use this setting for PC connected via HDMI. When receiving video signal source via HDMI input, this setting will display the image correctly without distortion or picture clipping. Notes: • In the aerial input signal mode, the picture size selections are Wide , Supe...

18 Using the TV’s features Selecting the picture mode You can select the picture quality instantly among three preset modes and one user-set mode.• Press q to select the desired picture quality. D y n a m i c Mode Picture quality q Dynamic bright and dynamic picture q Standard standard picture q Mil...

19 Using the TV’s features 5 Press i , then press I or i to select Hue , Saturation or Brightness . Red Brightness 0 H u e Saturation 0 MENU Back Watch TV EXIT 0 6 Press u or U to adjust the settings as required. Notes: • If you select colour management Off mode, this mode is not available. • In the...

20 Using the TV’s features Selecting the stereo programmes 1 When a stereo programme is received, d Stereo appears. 2 Press s to select the stereo/monaural mode. d Stereo and e Mono appear cyclically on the screen. S t e r e o Selecting the bilingual programmes 1 When a bilingual programme is receiv...

21 Using the TV’s features Selection I Pressing i Bass weaker stronger Treble weaker stronger Balance decreases the right channel decreases the left channel Selecting the surround sound 1 From the SOUND menu, press u or U to select Surround . 2 Press I or i to select On or Off . Note: When Surround ...

22 Using the TV’s features Using the auto format When the TV receives a true HDMI signal picture and the auto format is On, it will automatically be displayed in HDMI signal format, irrespective of the TV’s previous setting. 1 Press MENU , then press I or i to display the FUNCTION menu. FUNCTION MEN...

23 Using the TV’s features Selecting the video input source to view 1 Press o or press Q on the remote control until the video input mode list appears on the screen, then press u , U or o to select appropriate input source (or press o on the TV bottom of the panel to select required input source dir...

24 2 Press u or U to select Teletext language , then press I or i to select the required language. • Language 1: English, German, Dutch, Flemish, Russian, Byelorussian, Bulgarian, Ukranian, Lettish, Lithuanian, Czech, Slovak, Estonian • Language 2: Polish, German, Dutch, Flemish, Estonian, Lettish, ...

25 Using the TV’s features Using LIST mode 1 Press TEXT to access teletext. Red Green Yellow Blue 1 0 0 T E X T M 0 0 1 4 : 5 8 : 5 5 1 0 0 2 0 0 3 0 0 4 0 0 The four choices at the bottom of the screen are now number – 100 , 200 , 300 and 400 , which have been programmed into the TV’s memory. 2 To ...

26 Connecting your TV Back connections You can connect a wide variety of auxiliary equipment via the terminals located on the back of the panel o (2) . Please always refer to the owner’s manual of the equipment to be connected for full details. Connection example TV back view Video Games Camcorder C...

27 Connecting your TV • This TV is only operable with L-PCM on 32/44.1/48 kHz and 16/20/24 bits. If there is no sound when using HDMI, use the analogue audio cables to connect the TV and the HDMI device, and select Analogue in HDMI audio of the AV connection menu ( - page 28). • This TV is able to c...

28 Connecting your TV Selecting the PC/HDMI1 audio mode You can select PC audio ( - page 29) or HDMI1 audio when using this function. 1 Press MENU , then press I or i to display the SETUP menu. AV c o n n e c t i o n M a n u a l t u n i n g OK OK Au t o t u n i n g OK L a n g u a g e SETUP MENU Back...

29 Connecting your TV Connecting a computer To connect a PC to the RGB/PC terminal on the TV: An analogue RGB (15 pin) computer cable can be connected. TV back view Computer Audio cable for PC-to-TV connection Conversion adapter (if necessary) RGB PC cable Mini D-sub 15 pin TV back view Connect a PC...

30 Connecting your TV To connect a PC to the HDMI terminal on the TV: When connecting a PC to the HDMI terminal on the TV, use an HDMI-to DVI adapter cable and analogue audio cables.If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). Separate analogue cables are not neces...

31 Connecting your TV 4 Press u or U to select an option you want to adjust. Press I or i to adjust the settings as required. Horizontal Position 0 Note: When you set the Vertical Position, the screen may not be changed even if changing the cursor position. Adjusting the clock phase of the picture I...

32 Troubleshooting Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions. Symptom and solution TV will not turn on • Make sure the power cord is plugged in, then press ! or 1 . • The remote control batteries may be dead. Replace ...

33 Reference section Broadcast system Broadcast transmission systems of each country or region Asia M.E. Country or region Colour Sound Bahrain, Kuwait, Israel, Oman, Qatar, United Arab Emirates, Yemen, etc. Indonesia, Malaysia, Singapore, Thailand, etc. PAL B/G China PAL D/K China Hong Kong PAL I I...

34 Reference section Specifi cations LCD colour television Model 32AV600E, 32AV600T, 32AV600Y, 32AV601E, 32AV601T, 37AV600E, 37AV600T, 37AV600Y Power source 32/37AV600/601E: 220V-240V AC, 50/60Hz32/37AV600/601T: 110V-240V AC, 50/60Hz32/37AV600/601Y: 220V-240V AC, 50Hz Power consumption 32AV600/601E/...