Page 4 - GENERAL; STANDARD PRODUCTS
VS-900 Architects and Engineering Specifications v1.0 4 1 GENERAL 1.1 MANUFACTURER The manufacturer shall have been in the business of manufacturing microprocessor-basedcommunication systems for more than ten years, and shall provide a minimum of two yearslimited warranty to the authorized installin...
Page 5 - SYSTEM CONFIGURATION AND COMPONENTS; SYSTEM DESCRIPTION
VS-900 Architects and Engineering Specifications v1.0 5 2 SYSTEM CONFIGURATION AND COMPONENTS 2.1 SYSTEM DESCRIPTION The security intercom system shall be designed for security applications and provide reliable andintelligible voice communication between Master Stations, Telephone Master Stations an...
Page 8 - EXCHANGE COMPONENTS
VS-900 Architects and Engineering Specifications v1.0 8 2.4 EXCHANGE COMPONENTS 2.4.1 EXCHANGE MAINFRAME The Exchange Mainframe shall be modular and support up to four (4) Master Stations orTelephone Master Stations and sixty-four (64) Sub-stations. Each mainframe shall have thecapacity to accept tw...
Page 9 - TELEPHONE MASTER STATION LINE CARD
VS-900 Architects and Engineering Specifications v1.0 9 ft./1.43 mile (2.3 km); #22 AWG: 4921 ft./0.93 mile (1.5 km); #24 AWG: 2953 ft./0.56 mile(0.9km). The Master Station Line Card shall be the TOA VS-900MS. 2.4.4 TELEPHONE MASTER STATION LINE CARD The Telephone Master Station Line Card shall be p...
Page 10 - PERIPHERAL COMPONENTS
VS-900 Architects and Engineering Specifications v1.0 10 The Audio Function Card shall be the TOA VS-900AF. 2.4.8 TIE-LINE INTERFACE CARD The Tie-Line Card shall be powered by the Exchange Mainframe and allow interconnection of upto sixteen exchanges in a multi-drop or “bussed” configuration. System...
Page 11 - REMOTE CONTROL AND MONITORING
VS-900 Architects and Engineering Specifications v1.0 11 The Direct Select Interface Card shall include an RS-232C D-sub connector, 9-pin, female forprogramming the connected Direct Select I/O Card(s). The DSI shall include an integral 6-position4-contact RJ11-type modular plug and connect to the Ma...
Page 12 - SYSTEM FUNCTIONS; STATION COMMUNICATION
VS-900 Architects and Engineering Specifications v1.0 12 3 SYSTEM FUNCTIONS Note: “Master Station” refers to proprietary system master station. “Telephone Master Station”refers to a single line telephone used as a limited-function Master Station. “Telephone Line” refersto outside telephone line comm...
Page 13 - CALLING PARTY DISPLAY
VS-900 Architects and Engineering Specifications v1.0 13 3.4.1 FULL-DUPLEX Communication between two Master Stations shall be full duplex if at least one handset is off-hook. Communication between two Telephone Master Stations shall be full-duplex.Communication between a Master Station and a Telepho...
Page 15 - OUTSIDE TELEPHONE LINE CALL FORWARDING
VS-900 Architects and Engineering Specifications v1.0 15 receiving station is also registered for a Call Forwarding-related function, calls shall not beforwarded from that receiving station. 3.14.4 OUTSIDE TELEPHONE LINE CALL FORWARDING The Outside Telephone Line Call Forwarding function shall autom...
Page 16 - EMERGENCY CONFERENCE
VS-900 Architects and Engineering Specifications v1.0 16 3.16 CONFERENCE The Conference function shall allow any Master Station or Telephone Master Station to initiatesimultaneous conversation with up to two other Master Stations or Telephone Master Stations. 3.17 EMERGENCY CONFERENCE The Emergency ...
Page 17 - EXTERNAL SOURCE DISTRIBUTION; OUTSIDE TELEPHONE LINE CALL FORWARDING
VS-900 Architects and Engineering Specifications v1.0 17 3.19 EXTERNAL SOURCE DISTRIBUTION The External Source Distribution function shall allow distribution of an external audio source to upto nineteen (19) zones. The function shall be activated by providing a continuous make contactclosure to one ...
Page 18 - CONVERSATION RECORDING
VS-900 Architects and Engineering Specifications v1.0 18 3.21 CONVERSATION RECORDING The Conversation Recording function shall allow individual recording of each Master Station,Telephone Master Station and Telephone Line port. Each port shall have an associated recordingoutput, 0 dBV, unbalanced and...