Page 2 - IMPORTANT SAFETY INFORMATION; TABLE OF CONTENTS; UNVENTED GAS ROOM HEATER SPECIFICATIONS AND TECHNICAL DETAILS
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 2 Caulking materials (noncombustible)Fireplace surround materials Check the inventory list to be sure that you haveall the necessary parts in usable condition. Alsocheck for concealed damage. IMPORTANT SAFETY INFORMATION INSTALLER: PLEASE LEAVE THESE I...
Page 3 - input of all operating appliances in the space.; Determine the volume of space — ft
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 3 Carbon Monoxide Poisoning: Early signs ofcarbon monoxide poisoning are similar to theflu with headaches, dizziness and/or nausea.If you have these signs, obtain fresh air im-mediately. Turn off the gas supply to theheater and have the Unvented Gas He...
Page 4 - LOCATION OF FIREPLACE; Divide the volume of space by 50 ft; to; Clearances; Ensure the minimum clearances shown in
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 4 Your options are: a. Rework equations adding the space of ad- joining room(s). If the extra volume providesan unconfined space, then remove door oradd ventilation grills between rooms. Referto National Fuel Gas Code, ANSI Z223.11992, Section 5.3. b. ...
Page 5 - Route gas supply line to appliance location.; PREINSTALLATION; Check that all listed parts have been received.; Figure 1; Minimum clearance to combustibles are:
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 5 Carefully inspect the heater case and contentsfor shipping damage and immediately informthe dealer from whom you purchased the gasfireplace if any damage is found. The appliance is shipped with all gas controlsand components installed and pre-wired. ...
Page 6 - Figure 3; Framing Dimensions
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 6 VFST FRAMING SPECIFICATIONS VFST APPLIANCE SPECIFICATIONS C A B Gas Line 2 x 4 Wall Framing Top View *1/2" (13mm) Required Air Space Clearance Drywall * Gas Line Energy Wall 2 x 4 Outside Wall Drywall Drywall * Bracket Bracket Bracket Bracket Fig...
Page 7 - VFPF FRAMING SPECIFICATIONS; End View; Front View
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 7 Figure 6 Figure 7 Figure 8 C A B Gas Line VFPF FRAMING SPECIFICATIONS VFPF APPLIANCE SPECIFICATIONS Gas Line Energy Wall 2 x 4 Outside Wall Drywall Drywall * Bracket Bracket Framing Top View * 1/2" (13mm) Required Air Space Clearance A 22-3/4"...
Page 8 - Figure 9
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 8 All appliances have a 3" long 3/8" NPT nippleinstalled at the valve. To quickly and easilycomplete the gas line routing, use the gas flexline kit, Model GFLV. Figure 9 Step 3. Remove the nailing flanges from thelower control compartment and i...
Page 9 - Finished Wall Details
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 9 Finished Wall Details It is sometimes best to frame the applianceafter it has been positioned in place. Frame with2 x 4s or heavier lumber. Always frame inaccordance with local building codes. Note: The header may rest on the top spacersbut must not ...
Page 10 - Assembling the Logs; Figure 15. Handle these; Flame Appearance; An incorrect pilot flame is shown in; Appliance Operation
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 10 Figure 15 Figure 17 Pilot Cut Out Assembling the Logs WARNING: DO NOT ADD EXTRA LOGS ORORNAMENTS SUCH AS PINE CONES, VER-MICULITE OR ROCK WOOL. USING THESEADDED ITEMS CAN CAUSE SOOTING. WARNING: DO NOT PLACE ANY LAVAROCK ON LOGS OR BURNERS. THIS MAY...
Page 11 - Replace logs if removed for pilot inspection.; Installing the Optional Glass Door; Remote Control Kit; and Step 6 for detailed installation instructions.
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 11 Figure 19 OPTIONAL EQUIPMENT An incomparable package of options are avail-able for use with these appliances. These op-tions can both customize the operation of theseunique appliances and enhance their beautyand charming appeal. All options are avai...
Page 14 - ACCESSORIES AND COMPONENTS
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 14 Gas Flex Line Kit FFGC Brass Louvers–Main Panel VF6-BRLK –End Panel VF6-BRLEK Note: Model DAT-6-4 may not be used in conjunction withModel SPK-6. Note: Model DAT-6-1 may not be used in conjunction withModel SPK-6. May only be used in conjuction with...
Page 15 - TROUBLESHOOTING GUIDE FOR UNVENTED GAS PRODUCTS
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 15 1. When igniter button is pressed, there is no sparkat ODS/pilot. 2. Heater produces unwanted odors. 3. Heater shuts off in use (ODS operates). 4. Gas odor even when control knob is in “OFF” position. 5. When igniter button is pressed, there is spar...
Page 16 - OPERATING INSTRUCTIONS; RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 16 OPERATING INSTRUCTIONS FOR YOUR SAFETY READ BEFORE LIGHTING LIGHTING INSTRUCTIONS 1. Stop! Read the safety information above. 2. Make sure manual shut-off valve is fully open. 3. Locate gas control knob and piezo. 4. Depress control knob in and turn...
Page 17 - Pilot Location; Pilot; Turn Control Knob to “OFF” Position; Turn Control Knob to “ON” Position
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 17 Note: Knob cannot be turned from “PILOT” to “OFF”unless the knob is pushed in slightly. Do not force. Figure 22 Pilot Location Figure 23 Pilot Figure 24 Turn Control Knob to “OFF” Position Turn Control Knob to “PILOT” Position E A TPTH TP TH PI LOT ...
Page 18 - VFST REPLACEMENT PARTS LIST; Description
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 18 VFST REPLACEMENT PARTS LIST VFST-CMN VFST-CMP No. Description Part No. Qty. Part No. Qty. 1. Valve - Millivolt 903489 1 901917 1 2. Injector, Burner 110389 2 110384 2 3. Pilot 110344 1 901915 1 4. Regulator, Pilot 903218 1 112081 1 5. Burner 112281 ...
Page 19 - REPLACEMENT PARTS – VFST
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 19 REPLACEMENT PARTS – VFST 7 8 6 2 14 1 4 9 10 12 15 13 12 3 16 5 11
Page 20 - VFPF REPLACEMENT PARTS LIST
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 20 VFPF REPLACEMENT PARTS LIST VFPF-CMN VFPF-CMP No. Description Part No. Qty. Part No. Qty. 1. Valve - Millivolt 903489 1 901917 1 2. Injector, Burner 110389 2 110384 2 3. Pilot 110344 1 901915 1 4. Regulator, Pilot 903218 1 112081 1 5. Burner 112281 ...
Page 21 - REPLACEMENT PARTS – VFPF
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 21 REPLACEMENT PARTS – VFPF 15 12 16 20 19 19 9 18 13 12 1 14 3 6 2 1 10 9 17 4 7 8 5 11
Page 24 - LHP
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 24 Printed in U.S.A. © 1998 by Lennox Hearth Products P/N 903571 REV. H 12/2007 The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and pro...