TOA SLDVT-35 - Manuals - manualsarea.com

Page 2 - GeneraL inForMation; taBLe oF contents; and enjoyable service from your LENNOX product.; introduction; show the appliances' gas; Table 3

2 The Millivolt appliances have a millivolt gas control valve with piezo ignition system provides safe, efficient operation. If any optional acces- sories which require electrical power are being installed, the electrical power must be provided at the time of appliance installation. The Electronic a...

Page 3 - Gas controls/control compartment; operation and care oF Your; Figure 1; by closing their; less than; must be disconnected; greater; Table 6

3 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Test gauge connections are provided on the front of the millivolt gas control valve, identi- fied IN for the inlet and OUT for the manifold side (see Figure 3 on Page 4) . A 1/8" NPT Test gauge connection is provided at the inlet and outlet ...

Page 4 - Variable Flame Height adjustment; Figure 4; SIT Millivolt Gas Valve; Figure 3; Dexen Electronic Gas Valve; Figure 2

4 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Millivolt appliances - Appliances with Millivolt systems will be fitted with the gas control valve shown in Figure 3. electronic appliances - Appliances with electronic systems will be fitted with the electronic valve shown in Figure 4. Millivol...

Page 5 - Page 3; Maintenance; Flame Appearance and; iMportant: do not use abrasive

5 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. 2. During the first initial burns of these appli- ances, there will be some odor emitted (see Burn-In Period on Page 3 ) . 3. Keep the lower control compartment clean by vacuuming or brushing at least twice a year. More frequent cleaning may be ...

Page 6 - instaLLinG GLass door; Figure 5

6 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Front Glass enclosure panel, removal and installation Figure 5 - instaLLinG GLass door WarninG: do not operate appli- ance with the glass front removed, cracked or broken. replacement of the glass should be done by a licensed or qualified servic...

Page 7 - Table 8; Bag of Glowing; instaLL VoLcanic stone, GLoWinG; Removing Glass Enclosure Panels; Handle logs carefully to pre-; Figure 7; This appliance is provided with enough; Place Volcanaic

7 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. reFerence Firebox accessories / parts cat. no. Model no. description 88L53 FGe Bag of Glowing embers (1 oz. rockwool) 80L42 FdVs Bag of decorative Volcanic stone Table 8 Glowing Embers Bag of Glowing Embers (rockwool) Separate into Quarter Size ...

Page 8 - sLdVt-35 LoG pLaceMent; Figure 8; catalog number for the entire

8 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. sLdVt-35 LoG pLaceMent Figure 8 Log number description 1 Left Front Log 2 Right Front Log 3 Left Rear Log 4 Right Rear Log catalog number for the entire log set: H7244 step 2 step 3 step 4 3 Left rear Bracket step 1 align hole at the bottom of l...

Page 9 - Figure 9; sLdVt-40 LoG pLaceMent; Ember Chunk

9 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Figure 9 sLdVt-40 LoG pLaceMent Log number description 1 Ember Chunk 2 Left Front Log 3 Right Front Log 4 Left Rear Log 5 Right Rear Log align hole at the bottom of left front log (2) over the left front bracket and the right front log over the ...

Page 10 - Figure; WarninG: ensure front glass

10 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Burner adJustMents (QuaLiFied tecHnicians onLY) Flame appearance and sooting Proper flame appearance is a flame which is blue at the base and becomes yellowish-orange in the body of the flame. When the appliance is first lit, the entire flame m...

Page 11 - Burner air shutter adjustment; WarrantY; duced if the air shutter is closed; a replacement kit is available,

11 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Main Burner Factory air shutter opening setting - inches (millimeter) Model natural Gas propane Gas sLdVt-35 1/32" (0.795 mm) 3/16" (4.763 mm) sLdVt-40 1/32" (0.795 mm) 3/16" (4.763 mm) Burner air shutter adjustment adjustment r...

Page 12 - WirinG diaGraMs; on a pullout panel located within the control compartment.; and dangerous appliance operation.

12 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. WirinG diaGraMs Wiring diagrams are provided here for reference purposes only. This information is also provided on schematics attached directly to the appliance on a pullout panel located within the control compartment. caution: Label all wire...

Page 13 - Model

13 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. accessorY coMponents remote control Kit, standard cat. no. Model no. description H0249 rcL remote control system (standard) (ref. Form # 750,127M) remote control Kit, deluxe cat. no. Model no. description H0251 rcL-stat remote control system (d...

Page 14 - Style View“ Doors and Facades-; ARCH PANE DESIGN KITS; Arch Pane Design; polished Brass & Brushed stainless 2-piece door Frame Kits; - piece door Frame Kits

14 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. style View screen doors - These Style View doors are easy to install and will not require hardware to atach them to the standard glass door frame. The Style View door installs over the standard glass enclosure panel and provides a barrier to pr...

Page 15 - Forced air Kit; Brickaded panel Liner Kit; accessorY coMponents continued; oFF/on Wall switch Kit; termination Guard Kits

15 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Bag of Glowing embersBag of Volcanic stone Replacement ember materi- als or volcanic stone are available for use with these appliances. Order kits as part of the periodic maintenance of the appliance. decorative Firebox accessories (all models)...

Page 16 - LiGHtinG instructions – MiLLiVoLt Gas VaLVe; For Your saFetY read BeFore LiGHtinG; WHat to do iF You sMeLL Gas; to turn oFF Gas to appLiance; Knob cannot be turned from “PILOT” to “OFF”; resuLt causinG propertY daMaGe, personaL inJurY or Loss oF LiFe.

16 LiGHtinG instructions – MiLLiVoLt Gas VaLVe For Your saFetY read BeFore LiGHtinG a. This appliance has a pilot which must be lighted with a piezo ignitor. When lighting the pilot, follow these instructions exactly. B. BeFore operatinG smell all around the appliance area for gas. Be sure to smell ...

Page 17 - instructions d’aLLuMaGe – Vanne GaZ MiLLiVoLt; instructions d'aLLuMaGe; Voici ce Que Vous deVeZ Faire si Vous dÉceLeZ une odeur; pour FerMer Le GaZ Qui aLiMente L’appareiL; Il est impossible de tourner le bouton de “PILOT” à “OFF” à

17 instructions d’aLLuMaGe – Vanne GaZ MiLLiVoLt instructions d'aLLuMaGe pour Votre sÉcuritÉ, LiseZ ces instructions aVant L’aLLuMaGe a. Cet appareil est muni d’une veilleuse qui doit être allumée avec un allumeur piézo-électrique. Lorsque vous allumez la veilleuse, suivre exactement ces instruction...

Page 18 - LiGHtinG instructions — eLectronic

18 a. When lighting the appliance, follow these instructions exactly. B. BeFore operatinG smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor. WHat to do iF You sMeLL Gas • Extinguish any open flame. • Open...

Page 19 - instructions d’aLLuMaGe — eLectronic; instructions d’aLLuMaGe; Voici ce Que Vous deVeZ Faire si Vous dÉceLeZ une

19 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. instructions d’aLLuMaGe — eLectronic instructions d’aLLuMaGe pour Votre sÉcuritÉ, LiseZ ces instructions aVant L’aLLuMaGe a. Lorsque vous allumez l’appareil, suivez exactement ces instruc- tions. B. aVant L’aLLuMaGe: Assurez-vous que vous ne dé...

Page 20 - periodically

20 Maintenance tasK accoMpLisHinG person procedure Inspecting/Cleaning Burner, Logs and Controls Qualified Service Technician Inspect valve and ensure it is properly operating. Check piping for leaks. Vacuum the control compartment, fireplace logs and burner area. Check Flame Patterns and Flame Heig...

Page 22 - TROUBLESHOOTING THE ELECTRONIC IGNITION SYSTEM; sYMptoM; switch are in the “ON” position.

22 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. TROUBLESHOOTING THE ELECTRONIC IGNITION SYSTEM sYMptoM possiBLe causes correctiVe action Check voltage on AC terminals of module an/or batteries. The value should be around 2.7 to 3.2 VAC. Confirm that wire connections are secure. Check for vis...

Page 23 - repLaceMent parts List

23 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. item no. description sLdVt-35 sLdVt-40 part no. Qty. part no. Qty. 1 Hood H7266 1 H7267 1 2 Lower control compartment panel H7262 1 H7263 1 3 enclosure, Glass Front (complete) H7264 1 H7265 1 4 door Latch spring H6135 2 H6135 2 5 Log set (compl...

Page 24 - repLaceMent parts; LHp; Dexen Valve

24 repLaceMent parts Printed in U.S.A. © 2008 by LENNOX HEARTH PRODUCTS p/n 506010-01 reV. n/c 08/2008 The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local...