TOA N-VR2010 - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS

2 1. SAFETY PRECAUTIONS ............................................................................... 3 2. LIST OF INCLUDED COMPONENTS AND PARTS ............................... 6 3. GENERAL DESCRIPTION ............................................................................. 6 4. FEATURES .......

Page 3 - SAFETY PRECAUTIONS; cautions regarding safety.; Safety Symbol and Message Conventions; When Installing the Unit; the user may be required to take adequate measures.; WARNING

3 SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or cautions regarding safety. • Keep this ins...

Page 4 - When the Unit is in Use; spill into the unit, this may cause a fire or electric shock.

4 Indicates a potentially hazardous situation which could result in deathor serious personal injury if ignored or mishandled. WARNING When the Unit is in Use • Should the following irregularity be found during use, immediately switch off the power, disconnect the power supply plug from the AC outlet...

Page 5 - CAUTION; Note; CU version complies with Part 15 of the FCC Rules.

5 When Installing the Unit • Never insert nor remove the power supply plug with wet hands, as an electric shock may result.• When unplugging the power supply cord, be sure to grasp the power supply plug; never pull on the cord itself. The power supply cord may be damaged, possibly causing a fire or ...

Page 6 - analog signal, and then transmits the analog video signal.

6 2. LIST OF INCLUDED COMPONENTS AND PARTS Check to be sure that the following components and parts are contained in the package: Power conversion cable ...................................................................................................... 1Network Video Receiver Instruction Manual ....

Page 7 - HANDLING PRECAUTIONS; Receiver's plastic or other parts may be deformed or discolored.; MPEG-4 visual patent portfolio license

7 5. HANDLING PRECAUTIONS • Do not give the Receiver a great shock or vibration, as this will damage the Receiver. • It is recommended that the Receiver be always used in locations where the ambient temperature ranges from -0°C to +50°C and humidity levels of less than 90% to ensure that no condensa...

Page 8 - TM; SYSTEM CONFIGURATION

8 Software Decoder N-SD2000 Network CombinationDome CameraN-CC2564 Network Color CameraN-CC2360 To 24V AC Network Video Receiver N-VR2010 Monitor Network Video Transmitter Network Video Transmitter N-VT2010 Network Video RecorderN-DR2000 PoE compatible switching HUB Analog CCTV system To AC mains To...

Page 9 - NOMENCLATURE AND FUNCTIONS; Initializes the setting contents to default conditions.

9 10/100M PoE 1 3 4 6 5 2 7. NOMENCLATURE AND FUNCTIONS [Front] (1) Initialization Key [INIT] Initializes the setting contents to default conditions. (2) Reset Key [RESET] Restarts the Receiver. (3) Ready Indicator (Green) Lights continuously while the Receiver is operating. The indicator flashes qu...

Page 11 - Notes; supplied from the hub.

11 8. CONNECTIONS 8.1. Connection example Network Video Receiver N-VR2010 Monitor PoE Compatible Switching HUB Software Decoder N-SD2000 Color Camera Network Video TransmitterN-VT2010 To AC mains 1 2 3 4 5 6 7 8 DC-IN Video output : BNC plug (optional) Video input IN 12V OUT AUDIO ADJ. PHANTOM MIC L...

Page 13 - • Applicable cable

13 IN 12V OUT AUDIO ADJ. PHANTOM MIC LINE ON NC VIDEO VOL RS485 CONTACT LINE IN OUT MIC IN CONTACT CONTACT IN OUT RS485 1 2 C 1 2 C + RS-232C 24V OUT 1 2 AUDIO DE UT VIDEO OUT Monitor Network Video Receiver N-VR2010 VIDEO IN Connect the 24 V AC or 24 V DC when not using a PoE-compatible hub. Note: C...

Page 14 - SETTING INITIALIZATION

14 1 2 3 4 1 2 3 4 MIC/ LINE PHANTOM AUDIO ADJ NC Terminal name No. 1: Selects either microphone level signal or line level signal as the audio input. Set to "MIC" when connecting a microphone, and to "LINE" when connecting other devices. ("LINE" is the default.) 2: Supply vo...