TOA N-CC2564 - Manuals

TOA N-CC2564 – Manual in PDF format online.

Manuals:

Manual

Manual TOA N-CC2564

Summary

Page 2 - TABLE OF CONTENTS

2 TABLE OF CONTENTS 1. SAFETY PRECAUTIONS ............................................................................... 3 2. LIST OF INCLUDED COMPONENTS AND PARTS ............................... 4 3. GENERAL DESCRIPTION ............................................................................. ...

Page 3 - SAFETY PRECAUTIONS; Safety Symbol and Message Conventions; When Installing the Unit; WARNING

3 1. SAFETY PRECAUTIONS • Be sure to read the instructions in this section carefully before use.• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this instruction ...

Page 4 - may result in electrical shock.; When the Unit is in Use; time, a fire or damage to the unit may result.; CAUTION; CU version complies with Part 15 of the FCC Rules.; LIST OF INCLUDED COMPONENTS AND PARTS; Note

4 When Installing the Unit • To avoid electric shocks, be sure to switch off the power before power supply wiring work. Failure to do so may result in electrical shock. • Leave the installation of the unit to your TOA dealer because the installation requires expert experience and skills. If the unit...

Page 5 - GENERAL DESCRIPTION; Electronic Zooming and Privacy Masking functions; HANDLING PRECAUTIONS

5 • Noise may appear on the monitor or preset camera positions may deviate with prolonged camera use. In such cases, use the camera’s refresh function to automatically refresh settings and reestablish the homeposition once a day or week, thus allowing any position deviation to be corrected. When cor...

Page 6 - MPEG-4 visual patent portfolio license

6 • Installing the camera cables in close proximity to fluorescent lamps or other electrical appliances can downgrade the picture quality. • If there is a strong electric or magnetic field near the camera, such as television transmission antennas, motors or transformers, this may distort or roll the...

Page 7 - Connects to the power supply.; Contact Output N1, N2; Used to initialize the network settings.

7 6. NOMENCLATURE [ Top view ] [ Front view ] 9 8 7 1 1 2 3 4 6 5 1 NETWORK COMBINA TION DOME CAMERA m od e l N - C C 25 6 4 C U 2 4V 5 0 / 6 0H z M a x. 1 6A 9 10 (1) Power Cable Connects to the power supply. (2) Network Terminal (10BASE-T/100BASE-TX) Connects to the 10BASET/100BASE-TX usingthe sup...

Page 9 - [ Cable routing over the ceiling surface ]; Perforated slot; PRECAUTIONS WHEN INSTALLING THE UNIT; Notes; DIRECT CEILING MOUNTING

9 1 1 [ Cable routing to the attic ] [ Cable routing over the ceiling surface ] Cut out this portion along the perforated slot of the Base Unit using nippers. Perforated slot 1 1 1 7. PRECAUTIONS WHEN INSTALLING THE UNIT Notes • Mount the camera to a heavy-duty ceiling surface (such as concrete ceil...

Page 11 - Perform DIP SW settings on the camera unit.

11 Align the marks Wire mounting bracket 4. Perform DIP SW settings on the camera unit. (For details, please refer to p. 32; "DIP Switch Settings.") 5. Attach the safety wire from the camera unit to the wire mounting hole of the base unit. 6. Align the positioning mark on the base unit with ...

Page 13 - Tighten 2 camera unit mounting screws.

13 Ceiling mounting coverC-BC511CC-BC511C-S Align the marks Tighten 9. Tighten 2 camera unit mounting screws. 10. Align the positioning mark on the ceiling mounting cover with that on the base unit. 11. Turn the ceiling mounting cover clockwise pushing it up to the base unit until it locks into plac...

Page 14 - MOUNTING THE CAMERA TO A WEAK CEILING PANEL; exceeds a height of 100 mm.

14 40 mm or less 100 mm or more Upper ceiling Ceiling panel Note When routing the wiring from the ceiling surface, the ceiling panel must be 9 - 40 mm in thickness. Safety wire (supplied with the C-BC511A) Upper ceiling Anchor bolt for safety wire Anchor bolt for celing mounting bracket Network Comb...

Page 15 - Make a mounting hole of ø140 mm in the ceiling panel.; Attach the ceiling mounting bracket to the end of the safety wire.

15 Anchor bolt for safety wire Ceiling surface Anchor bolt for ceiling mounting bracket Upper ceiling Ceiling panel ø140 mm 9.2. Mounting Procedures 1. Make a mounting hole of ø140 mm in the ceiling panel. 2. Install the anchor bolt for ceiling mounting bracket and anchor bolt for safety wire into t...

Page 16 - Attach the supplied safety wire to the base unit.

16 Use screws M3 x 8 tightened to the base unit. 6. Attach the supplied safety wire to the base unit. 7. Attach the safety wire connected to the base unit to the ceiling mounting bracket. 8. For subsequent procedures, follow the steps 1 – 11 on p. 10 – 13.

Page 17 - FLUSH CEILING MOUNTING

17 Upper ceiling 250 mm or more Ceiling panel 40 mm or less Safety wire (supplied with the C-BC511U and C-BC511U-S) Anchor bolt for flush ceiling mounting bracket Upper ceiling Anchor bolt for safety wire C-BC511U or C-BC511U-S Flush Ceiling Mounting Bracket(optional) Ceiling panel Network Combinati...

Page 19 - Squeeze the cables after connection completion.

19 6. Release the lock on the hinged portion of the base unit and connect the composite cable and power cable extending from the base unit. (For details, please refer to p. 30; "CONNECTIONS.") Open Hinged portion 4 Cam e ra dir e ction Notch Upper ceiling Anchor bolt flush ceiling mounting b...

Page 20 - era

20 7 Flush ceiling mounting bracket Ceiling holding plate Ceiling panel Ceiling panel mounting screws Turn clockwise. 8. Fix the flush ceiling mounting bracket to the anchor bolt for flush ceiling mounting. Tighten Cable entry opening Notch Ca m era d irec tio n Note: Squeeze the cables after connec...

Page 21 - Attach the camera unit to the base unit.

21 Align the notch with mark. 12 Align the notch with mark. 13 10. Attach the camera unit to the base unit. Align the positioning mark on the camera unit with that on the flush ceiling mounting bracket. 11. Perform steps 7 – 9 on p. 12 – 13. 12. Align the positioning mark on the supplied dome cover ...

Page 22 - CEILING SUSPENSION; • When suspending the camera from a double-

22 Anchor bolt for safety wire Upper ceiling Saddle bracket Footing Safety wire (supplied with the C-BC511P) Suspension plate (separately required part) Top cover Ceiling plate C-BC511P Ceiling Suspension Bracket (optional) Footing/Saddle NetworkCombination Dome Camera C-BC511C or C-BC511C-S Ceiling...

Page 24 - Install the suspension plate behind the ceiling panel.

24 Saddle bracket Footing Suspension pipe Camera orientation 81 40 70 46 [Mounting hole dimensional diagram] Unit: mm Upper ceiling Power cable Anchor bolt for safety wire Suspension plate (to be prepared separately) Ceiling panel Saddle bracket Suspension pipe C-channel bar (to be prepared separate...

Page 25 - Attach two saddle brackets to the suspension pipe.

25 Camera direction Footing M4 x 8 machine screw (supplied with the Network Combination Dome Camera) Use screws M3 x 8 tightened to the base unit. Camera direction Secure these two holes first.(Base unit mounting holes) Suspension pipe mounted to the ceiling. Saddle bracket Oval hole Screw 10. Attac...

Page 31 - Return the set contents to default conditions.

31 13.1. Connection example Connections to the network system differ depending on the devices to be used.For details, refer to the descriptions about system examples in the setup manual. N-SD2000 Software Decoder N-CC2564 Network Combination Dome Camera To 24 V AC Switching HUB To AC 1 2 3 4 5 6 7 8...