TOA IQ 18B - Manuals - manualsarea.com

Page 5 - SIGNAL; EUTRIK; USA I; NC; Or visit their website on

5 1. Introduction Thank You for purchasing Tannoy PowerDual™ iQ i8B. The iQ 18B is a dedicated sub-woofer designed for high definition sound reinforcement at low frequencies. It comprises an 18” driver in a horn-loaded cabinet, giving increased efficiency and improved LF output. For optimal performa...

Page 6 - Polarity Checking; terminal of the amplifier and likewise Pin 2 to

6 CABLE RUN (m) C.S.A. OF EACH CONDUCTOR (mm) CABLE RESISTANCE Ω Ω % POWER LOSS INTO 8 Ω Ω LOAD % POWER LOSS INTO 4 Ω Ω LOAD 10 2.5 4.0 6.0 0.14 0.09 0.06 1.7 1.1 0.73 3.5 2.2 1.5 25 2.5 4.0 6.0 0.35 0.22 0.14 4.3 2.7 1.8 8.6 5.4 3.6 50 2.5 4.0 6.0 0.69 0.43 0.29 8.6 5.4 3.6 17.0 11.0 7.2 100 2.5 4....

Page 7 - for the correct parameter settings or refer to the recommended

7 For optimal performance the PowerDual™ iQ 18B has been designed to operate with PowerDual™ iQ 10 mid/high cabinet, where overall system control is achieved by utilising the TDX2 system controller. The TDX2 has been factory preset to provide the recommended cross-over points, delays and overall sys...

Page 9 - . In the addition to flying the iQ 18B by

9 10. Flying Convenient flying points are provided on the iQ 18B which will allow the optional flying equipment to be used, as shown in Figure 10a . In the addition to flying the iQ 18B by itself, it can also be flown in conjunction with Tannoy iQ 10 Mid/High unit. They can also be configured to be ...

Page 10 - Figure 10b

10 10.1. Flying an iQ 18B To fly the iQ 18B by itself, the following accessories are required: SR18 Side Rail Kit and SCB Beam Kit. The flown system is assembled as shown in Figure 10b . The SR18 side rail kit is screwed to the side of the cabinet using the screws provided ( 1 ). The SCB Beam Kits a...

Page 13 - Performance Data

13 To fly double combined iQ 18B with the iQ 10 Mid/High unit (with optional trapezoidal cabinet), the following accessories are required: 2 × SR18/10 Side Rail Kit, 2 × SCB Beam Kit and JK1 Jointing Kit. The flown system is assembled as shown in Figure 10g . First, the SR18/10 side rail kit is scre...

Page 14 - Technical Specifications

14 Anechoic Frequency Response, with TDX2 Controller Impedance Response, Passive 12. Technical Specifications

Page 16 - DO NOT SHIP ANY PRODUCT TO TANNOY WITHOUT PREVIOUS AUTHORISATION; EASE

16 13. iQ 18B Service Parts and Accessories Part Number Description 7900 0954 Driver Kit Type 4504 7900 0955 Recone Kit Type 4504 8001 2070 SR 18 Side Rail Kit 8001 2080 SR 18/10 Side Rail Kit 8001 2090 JK1 Jointing Kit 8001 2180 SCB Single Cabinet Beam 8001 2190 EBS10 Eyebolt Set 8000 0727 TDX2 Dig...

Page 18 - Tannoy Limited; Tannoy is a member of the

18 Tannoy Limited , Professional Division, Coatbridge, Strathclyde, ML5 4TF, Scotland. Tel: +44 (0) 1236 420199 Fax +44 (0) 1236 428230 e-mail: [email protected] Website: www.tannoy.com Tannoy / TGI North America Inc. , 335 Gage Avenue, Suite 1, Kitchener, Ontario, Canada N2M 5E1. Tel: (519) 745-1...